GLENAIR IPT07E18

IPT Series
Bayonet Lock
Connectors
IPT 07 E...SR
Rear Panel Mount Jam Nut
Receptacle Connector and Backshell
with Cable Clamp and Bushing
IPT 07 E 18-11 S Z C SR XX
MIL-C-26482
Series l Type
Mod Code Options
See Table II
07 - Real Panel Mount
Jam Nut Receptacle
Cable Clamp with Bushing
Connector Class
E - Environmental
Contact Type
C - Crimp
(Omit for Solder Cup)
Shell Size and
Insert Arrangements
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
B
G
APPLICATION NOTES
1. Rear panel mount jam nut receptacle connector and backshell with cable clamp and bushing.
2. Connector/Backshell Class “E” (environmental)­­––Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-98
www.glenair.com
IPT Series
Bayonet Lock
Connectors
IPT 07 E...SR
Rear Panel Mount Jam Nut
Receptacle Connector and Backshell
with Cable Clamp and Bushing
TABLE I: DIMENSIONS
Shell size
B
±0.25
C
Max.
G
±0.4
H
±0.4
L
Max
N
Thread
8
3.2
20.60
23.8
19
56
6 - 32
10
4.8
22.20
27.0
22
56
6 - 32
12
7.9
25.40
31.7
27
56
6 - 32
14
9.5
28.60
34.9
30
56
6 - 32
16
12.7
30.20
38.1
33
56
6 - 32
18
15.9
36.50
41.3
36
58
8 - 32
20
15.9
36.50
46.0
40
58
8 - 32
22
19.0
43.65
49.2
43
65
8 - 32
24
20.3
43.65
52.4
46
65
8 - 32
TABLE II: MODIFICATION CODES
Shell Finish
(Omit for Standard Cad/Olive Drab Finish)
Assembly with Accessories
(Omit for Standard Version)
F2 - Bright Nickel Plating (RoHs)
Key Polarization (Omit for N version)
W, X, Y, Z = Alternates
F6 - Black Electrodeposited Paint (RoHs)
N0 - Connector Less Backshell
F7 - Black Zn-Co Plating (RoHs)
GXXX - Custom Designed Connector
F8 - Olive Drab Zn-Co Plating
STANDARD FINISHES (For QQ-A-591 Aluminum Shells)
Requirements
IAW RoHS
Not IAW RoHS
F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive
G3 Cadmium with Olive F8 Zinc Cobalt with
Drab Passivation
Olive Drab Passivation
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
-40°C + 100°C
-55°C + 125°C
24 hour
500 hour
Very Good
Very Good
NO
Very Good
-55°C + 125°C
-55°C + 125°C
-40°C + 100°C
500 hour
500 hour
200 hour
Very Good
Good
Very Good
Very Good
Good
Good
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-99
www.glenair.com