MURATA NFM21CC223R1H3

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines
Data Sheet
1
EMIFILr (Capacitor type) Single Circuit Type for Signal Lines
NFM21C Series (0805 Size)
c Dimensions
c Insertion Loss Characteristics (Main Items)
0.3±0.2
(50Ω - 50Ω)
0.85±0.1
0
Insertion Loss (dB)
20
0.6±0.2
2.0±0.2
1.25±0.1
(2)
NFM21CC223R1H3
NFM21CC222R1H3
40
60
NFM21CC102R1H3
NFM21CC471R1H3
NFM21CC221R1H3
NFM21CC101U1H3
NFM21CC470U1H3
80
(3)
0.2+0.2
–0.1
(1)
NFM21CC220U1H3
(2)
100
0.1
: Electrode
1
(in mm)
c Equivalent Circuit
10
100
Frequency (MHz)
1000
6000
c Packaging
Input (Output)
(1)
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
4000
B
Bulk(Bag)
500
Output (Input)
(3)
No polarity.
GND
(2)
c Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation Resistance (min.)
Operating
Temperature Range
-55 to +125°C
NFM21CC220U1H3p
22pF ±20%
700mA
50Vdc
1000M ohm
NFM21CC470U1H3p
47pF ±20%
700mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC101U1H3p
100pF ±20%
700mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC221R1H3p
220pF ±20%
700mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC471R1H3p
470pF ±20%
1000mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC102R1H3p
1000pF ±20%
1000mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC222R1H3p
2200pF ±20%
1000mA
50Vdc
1000M ohm
-55 to +125°C
NFM21CC223R1H3p
22000pF ±20%
2000mA
50Vdc
1000M ohm
-55 to +125°C
Number of Circuit: 1
Continued on the following page.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines
Data Sheet
2
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/