VISHAY 10TQ045

10TQ... Series
Vishay High Power Products
Schottky Rectifier, 10 A
FEATURES
• 175 °C TJ operation
• Low forward voltage drop
• High frequency operation
Base
cathode
2
TO-220AC
• High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
• Guard ring for enhanced ruggedness and long term
reliability
• Designed and qualified for industrial level
3
Anode
1
Cathode
DESCRIPTION
The 10TQ... Schottky rectifier series has been optimized for
low reverse leakage at high temperature. The proprietary
barrier technology allows for reliable operation up to 175 °C
junction temperature. Typical applications are in switching
power supplies, converters, freewheeling diodes, and
reverse battery protection.
PRODUCT SUMMARY
IF(AV)
10 A
VR
35/45 V
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
10
A
Rectangular waveform
VRRM
IFSM
tp = 5 µs sine
VF
10 Apk, TJ = 125 °C
TJ
Range
35/45
V
1050
A
0.49
V
- 55 to 175
°C
10TQ035
10TQ045
UNITS
35
45
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
Maximum working peak reverse voltage
VR
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current
See fig. 5
IF(AV)
Maximum peak one cycle non-repetitive
surge current
See fig. 7
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 2 A, L = 6.5 mH
13
mJ
IAR
Current decaying linearly to zero in 1 µs
Frequency limited by TJ maximum VA = 1.5 x VR typical
2
A
Repetitive avalanche current
Document Number: 93198
Revision: 24-Jun-08
50 % duty cycle at TC = 151 °C, rectangular waveform
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated load
condition and with rated
VRRM applied
For technical questions, contact: [email protected]
10
1050
A
280
www.vishay.com
1
10TQ... Series
Vishay High Power Products
Schottky Rectifier, 10 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
10 A
Maximum forward voltage drop
See fig. 1
VFM (1)
TJ = 25 °C
20 A
10 A
TJ = 125 °C
20 A
Maximum reverse leakage current
See fig. 2
IRM (1)
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
VALUES
UNITS
0.57
0.67
V
0.49
0.61
2
mA
15
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
900
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
8.0
nH
10 000
V/µs
VALUES
UNITS
- 55 to 175
°C
Maximum voltage rate of change
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
dV/dt
Rated VR
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and
storage temperature range
TEST CONDITIONS
TJ, TStg
Maximum thermal resistance,
junction to case
RthJC
DC operation
See fig. 4
2.0
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased
0.50
Approximate weight
Mounting torque
Marking device
www.vishay.com
2
°C/W
2
g
0.07
oz.
minimum
6 (5)
maximum
12 (10)
kgf · cm
(lbf · in)
Case style TO-220AC
For technical questions, contact: [email protected]
10TQ035
10TQ045
Document Number: 93198
Revision: 24-Jun-08
10TQ... Series
Schottky Rectifier, 10 A
1000
IR - Reverse Current (mA)
1000
IF - Instantaneous Forward
Current (A)
Vishay High Power Products
100
TJ = 175 °C
TJ = 125 °C
TJ = 25 °C
10
1
100
TJ = 175 °C
10
TJ = 150 °C
1
TJ = 125 °C
TJ = 100 °C
0.1
TJ = 75 °C
0.01
TJ = 50 °C
0.001
TJ = 25 °C
0.0001
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.6
1.4
0
1.8
5
10
VFM - Forward Voltage Drop (V)
15
25
20
30
35
40
45
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
0
10
20
40
30
50
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
PDM
0.1
0.01
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
0.001
0.00001
t1
t2
Notes:
1. Duty factor D = t1/t2 .
2. Peak TJ = PDM x ZthJC + TC
Single pulse
(thermal resistance)
0.0001
0.001
0.01
0.1
1
10
.
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93198
Revision: 24-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
3
10TQ... Series
Schottky Rectifier, 10 A
Vishay High Power Products
8
10TQ
RthJC (DC) = 2.0 °C/W
175
170
DC
165
160
D = 0.08
D = 0.17
D = 0.25
D = 0.33
D = 0.50
7
Average Power Loss (W)
Allowable Case Temperature (°C)
180
6
5
RMS limit
4
3
DC
2
1
0
155
0
5
10
15
5
0
10
15
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current
L
D.U.T.
IRFP460
Rg = 25 Ω
Current
monitor
High-speed
switch
Freewheel
diode
+ Vd = 25 V
40HFL40S02
Fig. 8 - Unclamped Inductive Test Circuit
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 93198
Revision: 24-Jun-08
10TQ... Series
Schottky Rectifier, 10 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
10
T
Q
045
-
1
2
3
4
5
1
-
Current rating (10 = 10 A)
2
-
Package:
T = TO-220
3
-
Schottky “Q” series
4
-
Voltage ratings
5
-
035 = 35 V
045 = 45 V
None = Standard production
PbF = Lead (Pb)-free
Tube standard pack quantity: 50 pieces
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95221
Part marking information
http://www.vishay.com/doc?95224
Document Number: 93198
Revision: 24-Jun-08
For technical questions, contact: [email protected]
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1