NT IA PL M CO S oH *R Features ■ ■ ■ ■ ■ The SND Series is currently available, although not recommended for new designs. Double contacts offer high reliability Low contact resistance Self-clean on contact area Splay terminals allow for automatic insertion by IC insertion machine Straight terminals are available for manual insertion ■ RoHS compliant* SND Series DIP Switch (Machine Insertable Type) Environmental Characteristics Mechanical Life..2,000 operations per switch Operation Force ......................1,000 g max. Stroke ..............................................1.0 mm Operating Temp. Range ....-20 °C to +85 °C Storage Temperature ........-40 °C to +85 °C Vibration Test ......................MIL-STD-202F, Method 201A Frequency ................10-55-10 Hz/minute Directions ................X,Y,Z, three mutually perpendicular directions Time......................2 hours each direction. High reliability Shock Test ..........................MIL-STD-202F, Method 213B, Condition A Gravity ..........50 G (peak value), 11 msec Direction & Times....................6 sides and 3 times in each direction. High reliability Physical Characteristics Base and Cover Materials ......................UL94V-0 high-temperature thermoplastic PPS Color ................................................Black Actuator Materials ................UL94V-0 nylon thermoplastic Color ................................................White Contact Materials ....................Alloy copper Terminal Materials ..............................Brass Contact Plating Materials ......................3 micro inches gold plating over 40 micro inches nickel Terminal Plating Materials ....................Gold Wave Soldering Process† ....Recommended solder temp. at 260 °C (500 °F) max., 5 sec. Hand Soldering Process† ................Use a soldering iron of 30 watts or less, controlled at 320 °C (608 °F) for approx. 2 sec. while applying solder Standard Packaging ......IC tubes/all poles in the “off” position †For best results, keep all switch contacts in their “off” position for all operations. Product Dimensions SND Series Dimensions A +.006/ -0 (A + .0002/-0) 1.9 (.075) ON 1 DIP 2 3 4 5 6 7 8 6.20 (.244) 1.74 2.54 (.069) (.100) TYP. 3.60 MAX. (.142) 0.50 (.020) 4.30 (.169) MIN. B 1.0 (.039) DIM. A 31.42 (1.237) 26.34 (1.037) 23.80 (.937) 21.26 (.837) 18.72 (.737) 16.18 (.637) 13.64 (.537) 11.10 (.437) 8.56 (.337) 6.02 (.237) 3.48 (.137) DIM. B 26.94 (1.100) 22.86 (.900) 20.32 (.800) 17.78 (.700) 15.24 (.600) 12.70 (.500) 10.16 (.400) 7.62 (.300) 5.08 (.200) 2.54 (.100) — How to Order Model Actuator • X = Raised Actuator • R = Recessed Actuator 7.80 (.307) 0.25 (.010) 9.84 ± 0.50 (.387 ± .020) SNDR SERIES POS. 12 10 9 8 7 6 5 4 3 2 1 SND X - 1 S - X 0.70 (.028) 7.62 ± 0.50 (.30 ± .020) MODEL NO. SND-12 SND-10 SND-9 SND-8 SND-7 SND-6 SND-5 SND-4 SND-3 SND-2 SND-1 SNDX SERIES Number of Positions • 1 = 1 Position • 2 = 2 Positions • 3 = 3 Positions • 4 = 4 Positions • 5 = 5 Positions • 6 = 6 Positions • 7 = 7 Positions • 8 = 8 Positions • 9 = 9 Positions • 10 = 10 Positions • 12 = 12 Positions Terminal Type • S = Splay (Machine Insertion Type) • H = Straight (Manual Insertion Type) RECOMMENDED PCB LAYOUT B ± 0.10 = 2.54 x (P-1) (B ± .004 = .100 x (P-1) Seal • X = Standard (Not Sealed) • T = Top Tape Sealed (“R” actuator only, excluding 1 position) Reflow Soldering Profile 0.97 ± 0.05 DIA. (.038 ± .002) MM DIMENSIONS: (IN) SCHEMATIC (TYP.) 1-12 POSITIONS AVAILABLE 275 7.62 ± 0.10 (.300 ± .004) 240 °C 225 Temperature (°C) Electrical Characteristics Electrical Life ............2,000 operations min. per switch, 24 VDC, 25 mA Non-Switching Rating ......100 mA, 50 VDC Switching Rating ................25 mA, 24 VDC Contact Resistance ........................50 milliohms max. at initial ..............100 milliohms max. after life test Insulation Resistance....100 megohms min. Dielectric Strength ............500 VAC/minute Capacitance ..................5 pf max. between adjacent closed switch Circuit ....................Single pole single throw 180 °C 175 10-15 Sec. 80-90 Sec. 125 120 °C 75 30-40 Sec. 25 0 20 40 60 35-60 Sec. 80 100 120 140 160 180 200 Time (Seconds) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SND Series DIP Switch (Machine Insertable Type) Packaging Specifications 12.0 ± 0.1 (.472 ± .004) 8.0 +0.2/-0.1 (.315 +.008/-.004) 11.0 ± 0.1 (.433 ± .004) 0.5 (.019) 2.0 (.08) 0.5 (.019) 5.0 +0/-.2 (.20 +0/-.004) 11.0 ± 0.1 (.433 ± .004) 5.0 ± 0.2 1.45 ± 0.1 0.1 R (.433 ± .004) (.20 ± .004) (.004) 2.5 (.100) 5.0 ± 0.1 (.20 ± .004) 0.5 (.019) 2.5 (.100) 0.5 (.019) REV. 02/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 0.5 (.019) 2.0 (.08) 4.0 (.16) 6.50 (.260) 5.35 (.210) 4.15 (.160) 16.50 (.650)