S5688B,S5688G,S5688J,S5688N TOSHIBA Rectifier Silicon Diffused Type S5688B, S5688G, S5688J, S5688N General Purpose Rectifier Application Unit: mm · Average forward current: IF (AV) = 1.0 A · Repetitive peak reverse voltage: VRRM = 100~1000 V Maximum Ratings (Ta = 25°C) Characteristic Symbol S5688B Repetitive peak reverse voltage S5688G S5688J VRRM IF (AV) S5688J S5688N Storage temperature range V 600 1.0 A 45 (50 Hz) IFSM Junction temperature 400 1000 S5688B S5688G Peak one cycle surge forward current (non repetitive) Unit 100 S5688N Average forward current Ratings 49 (60 Hz) A 30 (50 Hz) 33 (60 Hz) Tj -40~150 °C Tstg -40~150 °C JEDEC ― JEITA ― TOSHIBA 3-3F2A Weight: 0.18 g (typ.) Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test condition Min Typ. Max Unit Peak forward voltage VFM IFM = 1.0 A ¾ ¾ 1.2 V Repetitive peak reverse current IRRM VRRM = rated ¾ ¾ 10 mA Marking Type code Code Lot No. Month (starting from alphabet A) G Cathode mark Year (last number of the christian era.) Type B S5688B G S5688G J S5688J N S5688N Color: Silver 1 2003-02-17 S5688B,S5688G,S5688J,S5688N Ta (max) - IF (AV) 30 Maximum allowable ambient temperature Ta (max) (°C) 200 Instantaneous on-state current iF (A) iF - vF 10 5 3 150 Tj = 25°C 1 0.5 0.3 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 Instantaneous forward voltage vF 160 120 80 40 0 0 3.2 (V) 0.2 0.4 0.6 Average forward current Surge forward current (non-repetitive) Transient thermal impedance rth (j-a) (°C/W) Surge forward current IFSM (A) Tj = 25°C 40 60 Hz 30 S5688B S5688G 10 50 Hz 3 5 S5688J S5688N 10 1.2 IF (AV) 1.4 (A) 1000 300 100 30 10 10 mm 30 50 10 mm 3 1 5 mm ´ 5 mm 0.3 0.1 0.001 5 mm 0.01 0.1 1 Time t 0 1 1.0 rth (j-a) - t 50 20 0.8 10 100 1000 (s) 100 Number of cycles at 50 Hz and 60 Hz 2 2003-02-17 S5688B,S5688G,S5688J,S5688N RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2003-02-17