VISHAY Y4046759K000F0W

V5X5P, V15X5P, V15X10P
Vishay Foil Resistors
Bulk Metal® Foil Technology Discrete Chips with
TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits
FEATURES
FIGURE 1 - TRIMMING CHIP RESISTORS1)
• Temperature coefficient of resistance (TCR):
Absolute: ± 2.0 ppm/°C typical
(- 55 °C to + 125 °C, + 25 °C ref.)
Tracking: to 0.5 ppm/°C1, 2)
V5X5P
RoHS
COMPLIANT
• Resistance tolerance:
Absolute to ± 0.01 % (user trimmable to ± 0.005 %)
Match: to 0.01 %
Trim Points
Gold Plated Pads
• Power rating: 50 to 150 mW at + 70 °C
V15X5P
• Load life stability: ± 0.05 % maximum at + 70 °C, 2000 h
at rated power
• Resistance range: 5 Ω to 80 kΩ (see table 2)
• Short time overload: ≤ 0.02 %
Gold Plated Pads
• Electrostatic discharge (ESD) above 25 000 V
V15X10P
• Non inductive, non capacitive design
• Rise time: 1 ns without ringing
• Current noise: - 40 dB
• Non inductive: < 0.08 µH
• Non hot spot design
Gold Plated Pads
Vishay precision chip resistors offer an order of magnitude of
improvement over other chip resistors in hybrid applications.
With a maximum Temperature Coefficient of Resistance
(TCR) of ± 5 ppm/°C, selected TCR tracking to 0.5 ppm/°C
and factory supplied resistance tolerances to ± 0.01 %, they
provide the user with accuracy and stability not available in
other chip resistor products. If desired they can be user
trimmed to any value within ± 0.005 %.
The typical pattern and trimming illustrations show that the
V5X5P resistor has 16 trimming points, the V15X5P has 20
and the V15X10P has 21. These trimming points are
arranged around the chip periphery and are clearly indicated.
Trimming to the desired resistance value and tolerance is
accomplished by cutting the trim points, thereby producing
specific incremental changes in the chip’s resistance value
relative to the original prevalue; up to + 20 % for the V5X5P,
+ 30 % for the V15X5P, and + 50 % for the V15X10P (not all
trim points need be used; the ΔR necessary to adjust the
pre-value to the desired final value dictates which trim points
neet to be used).
Vishay precision chip resistors are designed to meet or
exceed the requirements of MIL-PRF-55342 characteristic E.
These discrete chips are available either factory trimmed to
exact resistance values (option T) or ready for user trimming
(option U).
Monitoring of circuit output while “actively” trimming readily
permits adjustment of the chip to ± 0.005 %.
Actual trimming charts are supplied on request for all images.
TABLE 1 - TOLERANCE AND TCR VERSUS RESISTANCE VALUE
VALUE
(Ω)
STANDARD TOLERANCE
(%)
TYPICAL TCR AND MAX SPREAD
- 55 °C to + 125 °C, + 25 °C Ref. (ppm/°C)
500 to 80K
± 0.01
±2±3
100 to < 500
± 0.01
±2±4
50 to < 100
± 0.01
±2±5
20 to < 50
± 0.02
±2±6
10 to < 20
± 0.05
±2±8
5 to < 10
± 0.10
± 2 ± 10
Note
• For tighter performances, please contact Vishay Application Engineering
Document Number: 63024
Revision: 25-Oct-07
For any questions, contact: [email protected]
www.vishay.com
1
V5X5P, V15X5P, V15X10P
Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips
with TCR of 2 ppm/°C and Tolerance to 0.005 %
for use in Hybrid Circuits
FIGURE 2 - DIMENSIONS in inches (millimeters)
0.020 ± 0.005
(0.508 ± 0.127)
0.020 ± 0.005
(0.508 ± 0.127)
0.150 ± 0.005
(3.81 ± 0.127)
V15X5P
( 0.483 +0.025
- 0.102 )
0.005 ± 0.004
(1.27 ± 0.102)
0.029 + 0.001
- 0.004
V15X10P
0.019 + 0.001
- 0.004
0.025 )
( 0.483 +- 0.102
0.050 ± 0.005
(1.27 ± 0.127)
( 0.737 +0.025
- 0.102 )
Square
0.008
(0.203)
Nominal
0.008
(0.203)
Nominal
V5X5P
0.034
(0.864)
0.008 Nominal
(0.203)
Nominal
0.050 ± 0.005
(1.27 ± 0.127)
+ 0.001
0.019 - 0.004
0.005 ± 0.004
(1.27 ± 0.102)
0.100 ± 0.005
(2.54 ± 0.127)
0.050 ± 0.005
(1.27 ± 0.127)
0.150 ± 0.005
(3.81 ± 0.127)
0.001
0.029 +
- 0.004
0.025
( 0.737 +- 0.102
)
0.020 ± 0.005
(0.508 ± 0.127)
TABLE 2 - PRECISION CHIP RESISTOR SPECIFICATIONS2)
Resistance range
5 Ω to 10 kΩ (model V5X5P)
5 Ω to 33 kΩ (model V15X5P)
33 kΩ to 80 kΩ (model V15X10P)
Trimming range
(Approximate adjustment capability)
0 to 1.2 x nominal prevalue (V5X5P)*
0 to 1.3 x nominal prevalue (V15X5P)
0 to 1.5 x nominal prevalue (V15X10P)
Note
* The V5X5P chips are being gradually redesigned for a higher trimming factor 1.3 or more instead of 1.2. For information about the availability of a specific
resistance value, contact the factory.
Resistance tolerance
Option T (trimmed to value at Vishay)*
± 0.01 %; ± 0.02 %; ± 0.05 %; ± 0.1 %; ± 0.25 %; ± 0.5 %; ± 1 %; ± 5 %
Option U (for user trimming to any value within ± 0.005 %)
G.F. = Good for values
Note
* See table 1 for resistance/tolerance limits
Load life stability
0.05 % ΔR maximum under full rated power for 2000 h at + 70 °C
Power rating
(at + 70 °C ambient temperature), (see figure 3)
V5X5P: 0.05 W (22 V maximum)
V15X5P: 0.1 W (54 V maximum)
V15X10P: 0.15 W (100 V maximum)
High frequency operation
Rise time
Inductance
Capacitance
1 ns without ringing
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
Current noise
< 0.010 µV(rms)/V of applied voltage
Voltage coefficient
< - 40 dB
Working voltage
22 V (model V5X5P)
54 V (model V15X5P)
100 V (model V15X10P)
www.vishay.com
2
For any questions, contact: [email protected]
Document Number: 63024
Revision: 25-Oct-07
V5X5P, V15X5P, V15X10P
Bulk Metal® Foil Technology Discrete Chips Vishay Foil Resistors
with TCR of 2 ppm/°C and Tolerance to 0.005 %
for use in Hybrid Circuits
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
METHOD PARAGRAPH
MIL-PRF-55342 CHARACTERISTIC E LIMITS
TYPICAL VISHAY
Test group I
Thermal shock
4.8.3
± 0.1 %
± 0.02 %
Test group II
Low temperature operation
Short time overload
High temperature exposure
Resistance to bonding exposure
4.8.5
4.8.6
4.8.7
4.8.8
± 0.1 %
± 0.1 %
± 0.1 %
± 0.2 %
± 0.005 %
± 0.02 %
± 0.02 %
± 0.02 %
Test group III
Moisture resistance
4.8.9
± 0.2 %
± 0.1 %
Test group IV
Life 2000 h at + 70 °C
4.8.11
± 0.5 %
± 0.04 %
Notes
1. TCR Tracking is a measure of the similarity of resistance value
change in two or more resistors which are undergoing the same
temperature changes. Tracking could be expressed as the
difference in the temperature coefficients of the resistors,
expressed in ppm/°C as (ΔR1/R1 - ΔR2/R2) x 10-6/ΔT °C.
3. All measurements are based on pad-to-pad excluding
termination wires. Maximum is 1.0 % A.Q.L. standard for all
specifications except TCR (for TCR information, see table 1 and
notes 1 and 2).
4. The resolution limit of existing test equipment.
2. Selected TCR Tracking is available for specially ordered lots of
resistors. The selected TCR tracking can be 3, 2, 1 and as close
as 0.5 ppm/°C throughout the full temperature range. Should
close TCR tracking be required for differing resistance values,
contact the factory.
5. Similar to MIL-Style RM0505 (MIL-PRF-55342/2).
6. Similar to MIL-Style RM1505 (MIL-PRF-55342/4).
7. When bonded to a ceramic substrate.
FIGURE 3 - POWER DERATING CURVE
Percent of Rated Power
Discrete chips suitable for working temperatures of up to + 175 °C are
available on request.
+ 125
- 55 °C
FIGURE 4 - TRIMMING TO VALUES
(Conceptual Illustration)
+ 70 °C
Rated Power
+ 100
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
+ 75
Mutual Inductance
Reduction due
to Change in
Current Direction
+ 50
+ 25
0
- 75
- 50
- 25
0
+ 25
+ 50
+ 75 + 100
Ambient Temperature (°C)
Document Number: 63024
Revision: 25-Oct-07
+ 125 + 150
Note: Foil shown in black, etched spaces in white
For any questions, contact: [email protected]
www.vishay.com
3
V5X5P, V15X5P, V15X10P
Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips
with TCR of 2 ppm/°C and Tolerance to 0.005 %
for use in Hybrid Circuits
TABLE 4 - GLOBAL PART NUMBER INFORMATION (Trimmed
Option)
NEW GLOBAL PART NUMBER: Y4045249R000Q0W (preferred part number format)
DENOTES PRECISION
VALUE
AER*
Y
R=Ω
K = kΩ
0 = Standard
1 - 999 = Custom
Y
4
0
4
5
2
4
9
R
0
0
0
Q
0
W
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
Trimmed**:
4045 = V5X5PT
4047 = V15X5PT
4475 = V15X10PT
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
J = ± 5.0 %
W = Waffle Pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y4045 249R000 Q 0 W:
TYPE: V5X5P Trimmed
VALUE: 249.0 Ω
ABSOLUTE TOLERANCE: ± 0.02 %
AER TYPE: Standard
PACKAGING: Waffle Pack
HISTORICAL PART NUMBER: V5X5PT 249R00 Q W (will continue to be used)
V5X5PT
249R00
Q
W
MODEL
OHMIC VALUE
RESISTANCE TOLERANCE
V5X5PT
V15X5PT
V15X10PT
249R00 = 249.0 Ω
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
J = ± 5.0 %
PACKAGING
W = Waffle Pack
Notes
* For non-standard requests, please contact Application Engineering.
** VISHAY to supply chips trimmed to the purchaser’s exact resistance and tolerance specifications, ready for insertion into a hybrid microcircuit
with no further processing other than bonding and termination. Specify exact resistance value(s) and tolerance(s).
www.vishay.com
4
For any questions, contact: [email protected]
Document Number: 63024
Revision: 25-Oct-07
V5X5P, V15X5P, V15X10P
Bulk Metal® Foil Technology Discrete Chips Vishay Foil Resistors
with TCR of 2 ppm/°C and Tolerance to 0.005 %
for use in Hybrid Circuits
TABLE 5 - GLOBAL PART NUMBER INFORMATION (Untrimmed Option)
NEW GLOBAL PART NUMBER: Y4044759R0000W (preferred part number format)
DENOTES PRECISION
GOOD FOR VALUE**
PACKAGING
Y
R=Ω
K = kΩ
W = Waffle Pack
Y
4
0
4
4
7
5
9
R
0
0
0
PRODUCT CODE
AER*
Untrimmed**:
4044 = V5X5PU
4046 = V15X5PU
4471 = V15X10PU
0 = Standard
1 - 999 = Custom
0
W
FOR EXAMPLE: ABOVE GLOBAL ORDER Y4044 759R000 0 W:
TYPE: V5X5P Untrimmed
GOOD FOR VALUE: 759.0 Ω
AER TYPE: Standard
PACKAGING: Waffle Pack
HISTORICAL PART NUMBER: V5X5PU 759R00 W (will continue to be used)
V5X5PU
759R00
W
MODEL
GOOD FOR VALUE
PACKAGING
V5X5PU
V15X5PU
V15X10PU
759R00 = 759.0 Ω
W = Waffle Pack
Notes
* For non-standard requests, please contact Application Engineering.
** To order user trimmable chips specify the final resistance value desired.
Document Number: 63024
Revision: 25-Oct-07
For any questions, contact: [email protected]ay.com
www.vishay.com
5
V5X5P, V15X5P, V15X10P
Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips
with TCR of 2 ppm/°C and Tolerance to 0.005 %
for use in Hybrid Circuits
EFFECTS OF GOLD WIRE
The bonding of the gold wires to the chip has an effect on the overall resistance and on the temperature coefficient, according to
the length of wire used.
The nomogram below shows the effect on both parameters with varying lengths of 0.001" (0.0254 mm) diameter gold wire.
NOMOGRAM
Change of resistance and TCR due to a length L of gold wire added at wire bonding.
thousandths of an inch
total length of 2 gold
wires of 0.001" diameter
1
ΔR
R
L
500
360
%
250
160
120
A
90
62.5
40
22.5
ppm
10
Δ TCR
ppm/°C
50
23
16
10.5
6
4
2.25
1.40
0.82
0.47
0.30
0.16
0.11
600
350
225
1900
1100
610
400
230
150
85
53
31
18
11
6.1
4.2
2.3
1.5
0.85
130
85
41
25
16
10
6
0.50
0.32
0.15
0.10
0.06
0.04
0.02
EXAMPLE:
Total length of wires L = 0.100" (point A on left scale)
Resistance of chip R = 200 Ω (point B on right scale)
Read on intersection of line as with central scale:
On left side - change of resistance:
ΔR = 600 ppm
R
On right side - change of TCR:
ΔTCR = ± 2.3 ppm
Nomogram based on the following specs for gold wire:
• Conductivity 72 % of copper
• 1.2 Ω/inch for 0.001" (0.0254 mm) diameter wire
• TCR 3900 ppm/°C
www.vishay.com
6
For any questions, contact: [email protected]
1.4 R
nominal resistance of
chip as measured on its
pads (Ω)
2.2
3.2
4
6.2
9
12.2
16
25
36
49
64
81
100
144
B
225
324
400
625
900
1.2K
1.6K
2.5K
3.6K
4.9K
6.4K
8.1K
10K
14.4K
22.5K
32.4K
40K
Document Number: 63024
Revision: 25-Oct-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1