TOSHIBA RN1913AFS

RN1912AFS, RN1913AFS
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT Process) (Transistor with Built-in Bias Resistor)
RN1912AFS, RN1913AFS
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
Unit: mm
1.0±0.05
Incorporating a bias resistor into a transistor reduces the parts count.
Reducing the parts count enables the manufacture of ever more
compact equipment and lowers assembly costs.
1
6
2
5
3
4
+0.02
0.1±0.05
Complementary to the RN2912AFS/RN2913AFS
0.48 -0.04
•
0.35 0.35
•
1.0±0.05
Two devices are incorporated into a fine-pitch, small-mold (6-pin)
package.
0.7±0.05
•
0.1±0.05
Equivalent Circuit and Bias Resistor Values
C
1. EMITTER1
2. BASE1
3. COLLECTOR2
4. EMITTER2
5. BASE2
6. COLLECTOR1
R1
fS6
E
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 common)
Characteristic
Symbol
Rating
Unit
Collector-base voltage
VCBO
50
V
Collector-emitter voltage
VCEO
50
V
Emitter-base voltage
VEBO
5
V
IC
80
mA
50
mW
Collector current
Collector power dissipation
PC (Note 1)
Junction temperature
Storage temperature range
0.15±0.05
0.8±0.05
0.1±0.05
JEDEC
―
JEITA
―
TOSHIBA
(E1)
(B1)
(C2)
(E2)
(B2)
(C1)
2-1F1D
Weight: 0.001 g (typ.)
Equivalent Circuit
(top view)
Tj
150
°C
Tstg
−55~150
°C
6
5
4
Q2
Q1
Note:
Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature,
etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.)
are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba
Semiconductor Reliability Handbook (“Handling Precautions”/“Derating
Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Total rating
1
2
3
Electrical Characteristics (Ta = 25°C) (Q1, Q2 common)
Characteristic
Symbol
Collector cutoff current
Emitter cutoff current
DC current gain
Collector-emitter saturation voltage
Collector output capacitance
Input resistor
Min
Typ.
Max
Unit
VCB = 50 V, IE = 0
VEB = 5 V, IC = 0
VCE = 5 V, IC = 1 mA
⎯
⎯
120
⎯
⎯
⎯
100
100
700
nA
nA
IC = 5 mA, IB = 0.25 mA
⎯
⎯
0.15
V
Cob
VCB = 10 V, IE = 0, f = 1 MHz
⎯
0.7
⎯
pF
R1
⎯
ICBO
IEBO
hFE
RN1912AFS
RN1913AFS
VCE (sat)
Test Condition
1
17.6
22
26.4
37.6
47
56.4
kΩ
2007-11-01
RN1912AFS, RN1913AFS
RN1912AFS
IC - VI (ON)
COMMON EMITTER
VCE = 0.2V
10
Ta = 100°C
25
1
-25
IC - VI (OFF)
Ta = 100°C
1000
-25
25
100
COMMON EMITTER
VCE = 5V
10
0.1
0.1
1
10
INPUT VOLTAGE VI (ON) (V)
RN1913AFS
0.2
100
IC - VI (ON)
0.4
0.6
0.8
1
1.2
1.4 1.6
INPUT VOLTAGE VI (OFF) (V)
RN1913AFS
100
1.8
IC - VI (OFF)
10000
COMMON EMITTER
VCE = 0.2V
COLLECTOR CURRENT IC (uA)
COLLECTOR CURRENT IC (mA)
RN1912AFS
10000
COLLECTOR CURRENT IC (uA)
COLLECTOR CURRENT IC (mA)
100
10
Ta = 100°C
1
25
-25
Ta = 100°C
1000
-25
25
100
COMMON EMITTER
VCE = 5V
10
0.1
0.1
1
10
INPUT VOLTAGE VI (ON) (V)
0.2
100
2
0.6
1
1.4
1.8
INPUT VOLTAGE VI (OFF) (V)
2.2
2007-11-01
RN1912AFS, RN1913AFS
hFE - IC
RN1912AFS
RN1912AFS
Ta = 100°C
100
-25
25
COMMON EMITTER
VCE = 5V
10
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
0.1
1
10
COLLECTOR CURRENT IC (mA)
100
0.1
hFE - IC
RN1913AFS
1
10
COLLECTOR CURRENT IC (mA)
100
VCE (sat) - IC
RN1913AFS
1000
1
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
DC CURRENT GAIN hFE
VCE (sat) - IC
1
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE (sat) ( V)
DC CURRENT GAIN hFE
1000
Ta = 100°C
100
-25
25
COMMON EMITTER
VCE = 5V
COMMON EMITTER
IC / IB = 20
Ta = 100°C
0.1
-25
25
0.01
10
0.1
1
10
COLLECTOR CURRENT IC (mA)
0.1
100
3
1
10
COLLECTOR CURRENT IC (mA)
100
2007-11-01
RN1912AFS, RN1913AFS
Type Name
Marking
6
RN1912AFS
5
4
Type Name
CH
1
2
3
6
5
4
RN1913AFS
Type Name
CJ
1
2
3
4
2007-11-01
RN1912AFS, RN1913AFS
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2007-11-01