TOSHIBA RN1105CT

RN1101CT ~ RN1106CT
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT process) (Bias Resistor built-in Transistor)
RN1101CT,RN1102CT,RN1103CT
RN1104CT,RN1105CT,RN1106CT
Switching Applications
Inverter Circuit Applications
Interface Circuit Applications
Driver Circuit Applications
Unit: mm
0.6±0.05
0.05±0.03
0.25±0.03
0.5±0.03
1.0±0.05
•
Incorporating a bias resistor into a transistor reduces parts count.
Reducing the parts count enable the manufacture of ever more
compact equipment and save assembly cost.
1
2
0.25±0.03
•
0.65±0.02
3
Complementary to RN2101CT to RN2106CT
0.35±0.02
0.05±0.03
0.15±0.03
C
R1
R2
B
E
0.38 +0.02
-0.03
Equivalent Circuit and Bias Resistor Values
Type No.
R1 (kΩ)
R2 (kΩ)
RN1101CT
4.7
4.7
RN1102CT
10
10
RN1103CT
22
22
RN1104CT
47
47
RN1105CT
2.2
47
RN1106CT
4.7
47
1.BASE
CST3
2. EMITTER
3, COLLECTOR
JEDEC
―
JEITA
―
TOSHIBA
2-1J1A
Weight: 0.75 mg (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
RN1101CT to 1106CT
RN1101CT to 1104CT
RN1105CT, 1106CT
Collector current
Collector power dissipation
Junction temperature
Storage temperature range
RN1101CT ro 1106CT
Symbol
Rating
Unit
VCBO
20
V
VCEO
20
V
10
VEBO
5
V
IC
50
mA
PC
50
mW
Tj
150
°C
Tstg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e.operatingtemperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2009-04-13
RN1101CT ~ RN1106CT
Electrical Characteristics (Ta = 25°C)
Characteristics
Collector cut-off current
Symbol
Test Condition
⎯
⎯
100
ICEO
VCE = 20 V, IB = 0
⎯
⎯
500
0.89
⎯
1.33
0.41
⎯
0.63
0.18
⎯
0.29
0.088
⎯
0.133
0.085
⎯
0.127
0.08
⎯
0.121
RN1101CT
30
⎯
⎯
RN1102CT
60
⎯
⎯
100
⎯
⎯
120
⎯
⎯
RN1105CT
120
⎯
⎯
RN1106CT
120
⎯
⎯
⎯
⎯
0.15
RN1101CT
1.0
⎯
2.0
RN1102CT
1.0
⎯
2.2
1.1
⎯
2.7
1.2
⎯
3.6
RN1105CT
0.6
⎯
1.1
RN1106CT
0.6
⎯
1.2
0.8
⎯
1.5
0.4
⎯
0.8
⎯
1.2
⎯
RN1101CT
3.76
4.7
5.64
RN1102CT
8
10
12
17.6
22
26.4
37.6
47
56.4
RN1105CT
1.76
2.2
2.64
RN1106CT
3.76
4.7
5.64
RN1101CT to 1104CT
0.8
1.0
1.2
RN1103CT
RN1104CT
VEB = 10 V, IC = 0
IEBO
RN1105CT
VEB = 5 V, IC = 0
RN1106CT
Collector-emitter
saturation voltage
Input voltage (ON)
Input voltage (OFF)
Collector output
capacitance
Input resistor
Resistor ratio
Max
VCB = 20 V, IE = 0
RN1102CT
DC current gain
Typ.
ICBO
RN1101CT to 1106CT
RN1101CT
Emitter cut-off current
Min
RN1103CT
RN1104CT
RN1101CT to 1106CT
RN1103CT
RN1104CT
RN1101CT to 1104CT
RN1105CT, 1106CT
RN1101CT to 1106CT
RN1103CT
RN1104CT
RN1105CT
hFE
VCE (sat)
VI (ON)
VI (OFF)
Cob
R1
R1/R2
RN1106CT
VCE = 5 V, IC = 10 mA
IC = 5 mA,
IB = 0.25 mA
VCE = 0.2 V, IC = 5 mA
VCE = 5 V, IC = 0.1 mA
VCB = 10 V, IE = 0,
f = 1 MHz
⎯
⎯
nA
mA
V
V
V
pF
kΩ
0.0376 0.0468 0.0562
0.08
2
Unit
0.1
0.12
2009-04-13
RN1101CT ~ RN1106CT
IC - VI(ON)
RN1101CT
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
100
Ta=100°C
10
25
1
-25
COMMON EMITTER
VCE=0.2V
0.1
1
10
INPUT VOLTAGE VI(ON) (V)
25
1
-25
COMMON EMITTER
VCE=0.2V
100
0.1
10
100
IC - VI(ON)
RN1104CT
100
COLLECTOR CURRENT IC (mA)
100
Ta=100°C
10
1
INPUT VOLTAGE VI(ON) (V)
IC - VI(ON)
RN1103CT
COLLECTOR CURRENT IC (mA)
Ta=100°C
10
0.1
0.1
25
1
-25
COMMON EMITTER
VCE=0.2V
Ta=100°C
10
25
1
-25
COMMON EMITTER
VCE=0.2V
0.1
0.1
0.1
1
10
0.1
100
1
RN1105CT
10
100
INPUT VOLTAGE VI(ON) (V)
INPUT VOLTAGE VI(ON) (V)
IC - VI(ON)
IC - VI(ON)
RN1106CT
100
100
Ta=100°C
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
IC - VI(ON)
RN1102CT
100
10
25
1
-25
COMMON EMITTER
VCE=0.2V
0.1
Ta=100°C
10
25
1
-25
COMMON EMITTER
VCE=0.2V
0.1
0.1
1
10
100
0.1
INPUT VOLTAGE VI(ON) (V)
1
10
100
INPUT VOLTAGE VI(ON) (V)
3
2009-04-13
RN1101CT ~ RN1106CT
RN1101CT
RN1102CT
IC - VI(OFF)
10000
COMMON EMITTER
VCE=5V
COLLECTOR CURRENT IC (μA)
COLLECTOR CURRENT IC (μA)
10000
1000
Ta=100°C
25
-25
100
10
COMMON EMITTER
VCE=5V
1000
Ta=100°C
-25
100
0.6
0.8
1
1.2
1.4
1.6
1.8
2
0.4
0.6
0.8
INPUT VOLTAGE VI(OFF) (V)
RN1103CT
10000
1
1.2
1.4
1.6
1.8
2
INPUT VOLTAGE VI(OFF) (V)
RN1104CT
IC - VI(OFF)
IC - VI(OFF)
10000
COMMON EMITTER
VCE=5V
COLLECTOR CURRENT IC (μA)
COLLECTOR CURRENT IC (μA)
25
10
0.4
1000
Ta=100°C
25
-25
100
10
COMMON EMITTER
VCE=5V
1000
Ta=100°C
25
-25
100
10
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
0.4
0.6
0.8
INPUT VOLTAGE VI(OFF) (V)
RN1105CT
1
1.2
1.4
1.6
1.8
2
INPUT VOLTAGE VI(OFF) (V)
RN1106CT
IC - VI(OFF)
10000
IC - VI(OFF)
10000
COMMON EMITTER
VCE=5V
COLLECTOR CURRENT IC (μA)
COLLECTOR CURRENT IC (μA)
IC - VI(OFF)
1000
Ta=100°C
25
-25
100
10
COMMON EMITTER
VCE=5V
1000
Ta=100°C
25
-25
100
10
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0
INPUT VOLTAGE VI(OFF) (V)
0.2
0.4
0.6
0.8
1
1.2
1.4
INPUT VOLTAGE VI(OFF) (V)
4
2009-04-13
RN1101CT ~ RN1106CT
RN1101CT
RN1102CT
hFE - IC
DC CURRENT GAIN hFE
DC CURRENT GAIN hFE
1000
Ta=100°C
100
hFE - IC
1000
25
-25
10
Ta=100°C
25
100
-25
COMMON EMITTER
VCE = 5V
COMMON EMITTER
VCE = 5V
10
1
1
10
1
100
10
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
RN1103CT
100
RN1104CT
hFE - IC
1000
hFE - IC
1000
DC CURRENT GAIN hFE
DC CURRENT GAIN hFE
Ta=100°C
Ta=100°C
25
100
-25
25
-25
100
COMMON EMITTER
VCE = 5V
COMMON EMITTER
VCE = 5V
10
10
1
10
100
1
10
COLLECTOR CURRENT IC (mA)
RN1105CT
COLLECTOR CURRENT IC (mA)
RN1106CT
hFE - IC
1000
hFE - IC
1000
DC CURRENT GAIN hFE
Ta=100°C
DC CURRENT GAIN hFE
100
25
-25
100
Ta=100°C
25
-25
100
COMMON EMITTER
VCE = 5V
COMMON EMITTER
VCE = 5V
10
10
1
10
100
1
10
100
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
5
2009-04-13
RN1101CT ~ RN1106CT
RN1101CT
RN1102CT
VCE(sat) - IC
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
COMMON EMITTER
IC / IB = 20
Ta=100°C
100
25
-25
COMMON EMITTER
IC / IB = 20
100
Ta=100°C
25
-25
10
10
1
10
100
1
RN1103CT
RN1104CT
VCE(sat) - IC
100
VCE(sat) - IC
1000
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
1000
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
10
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
COMMON EMITTER
IC / IB = 20
100
Ta=100°C
25
-25
10
COMMON EMITTER
IC / IB = 20
100
Ta=100°C
25
-25
10
1
10
100
1
RN1105CT
10
100
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
RN1106CT
VCE(sat) - IC
VCE(sat) - IC
1000
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
1000
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
VCE(sat) - IC
1000
1000
COMMON EMITTER
IC / IB = 20
100
Ta=100°C
25
-25
10
COMMON EMITTER
IC / IB = 20
100
Ta=100°C
25
-25
10
1
10
100
1
10
100
COLLECTOR CURRENT IC (mA)
COLLECTOR CURRENT IC (mA)
6
2009-04-13
RN1101CT ~ RN1106CT
Type Name
Marking
Type name
RN1101CT
1
L0
3
2
Type name
RN1102CT
1
L1
3
2
Type name
RN1103CT
1
L2
3
2
Type name
RN1104CT
1
L3
3
2
Type name
1
RN1105CT
L4
3
2
Type name
RN1106CT
1
L5
3
2
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is
protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects
that come into direct contact with devices should be made of anti-static materials.
7
2009-04-13
RN1101CT ~ RN1106CT
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2009-04-13