DESCRIPTION BY APPD DATE B REVISED PER ECR-ER22873 CTC 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. REV CY 03/22/10 NOTES: UNLESS OTHERWISE SPECIFIED 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) SPRING WASHER: .000200 MIN SILVER PER QQ-S-365 OVER COPPER PER ASTM B734 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 (ROHS) 4. FOR USE WITH TACHII CABLE TCX-3CFWS OR EQUIVALENT . 5. ASSEMBLE TO CABLE USING CAP-702. MARKING: KINGS+P/N+DATE CODE + LOCATION CODE 6. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 26.5 dB MIN (DC TO 3 GHz) . .394 [10.00] ACROSS FLATS .413 10.49 .138 3.51 ( 1.516 38.51 REF. ) WHEN ASSEMBLED CATALOG P/N: 2065-700-3CW01N RECOMMENDED CABLE TRIMMING DIMENSIONS PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: X:X THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN CY APPROVED WPM DMF026 B DATE APPROVED 12/24/08 DCam DATE APPROVED 01/07/09 XXX DATE 01/07/09 DATE XX/XX/XX BNC 75 PLUG FOR TCX-3CFWS (ROHS COMPLIANT) A SD2065-700-3CW01N SHT 1 OF 1 REV B