FJN4301R FJN4301R Switching Application (Bias Resistor Built In) • Switching circuit, Inverter, Interface circuit, Driver Circuit • Built in bias Resistor (R1=4.7KΩ, R2=4.7KΩ) • Complement to FJN3301R TO-92 1 1. Emitter 2. Collector 3. Base PNP Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage Value -50 Units V VCEO VEBO Collector-Emitter Voltage -50 V Emitter-Base Voltage -10 V IC Collector Current -100 mA PC Collector Power Dissipation 300 mW TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C Equivalent Circuit C R1 B R2 E Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage Test Condition IC= -10µA, IE=0 Min. -50 BVCEO Collector-Emitter Breakdown Voltage IC= -100µA, IB=0 -50 ICBO Collector Cut-off Current VCB= -40V, IE=0 hFE DC Current Gain VCE= -5V, IC= -10mA VCE(sat) Collector-Emitter Saturation Voltage IC= -10mA, IB= -0.5mA fT Current Gain Bandwidth Product Cob Output Capacitance VCE= -10V, IC=-5mA VCB= -10V, IE=0 f=1.0MHz Max. Units V -0.1 µA V 20 -0.3 VI(off) Input Off Voltage VCE= -5V, IC= -100µA VI(on) Input On Voltage VCE= -0.3V, IC= -20mA R1 Input Resistor 3.2 R1/R2 Resistor Ratio 0.9 ©2002 Fairchild Semiconductor Corporation Typ. V 200 MHz 5.5 pF -0.5 V -3 V 4.7 6.2 KΩ 1 1.1 Rev. A, July 2002 -100 1000 VCE =- 0.3V R1 = 4.7 K R2 = 4.7 K VCE = - 5V R1 = 4.7 K VI(on)[V], INPUT VOLTAGE hFE, DC CURRENT GAIN R2 = 4.7 K 100 -10 -1 -0.1 -0.1 10 -1 -10 -100 -1 -10 -100 -1000 IC[mA], COLLECTOR CURRENT IC[mA], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Input On Voltage 350 VCE = - 5V R1 = 4.7K R2 = 4.7K 300 PC[mW], POWER DISSIPATION IC [µA], COLLECTOR CURRENT -1000 -100 250 200 150 100 50 0 -10 -0.0 0 -0.4 -0.8 -1.2 -1.6 -2.0 25 50 75 100 125 150 175 -2.4 0 VI(off)[V], INPUT OFF VOLTAGE Figure 3. Input Off Voltage ©2002 Fairchild Semiconductor Corporation Ta[ C], AMBIENT TEMPERATURE Figure 4. Power Derating Rev. A, July 2002 FJN4301R Typical Characteristics FJN4301R Package Demensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A, July 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FACT ActiveArray FACT Quiet Series Bottomless FASTâ CoolFET FASTr CROSSVOLT FRFET DOME GlobalOptoisolator EcoSPARK GTO E2CMOSTM HiSeC EnSignaTM I2C Across the board. Around the world. The Power Franchise Programmable Active Droop ImpliedDisconnect PACMAN POP ISOPLANAR Power247 LittleFET PowerTrenchâ MicroFET QFET MicroPak QS MICROWIRE QT Optoelectronics MSX Quiet Series MSXPro RapidConfigure OCX RapidConnect OCXPro SILENT SWITCHERâ OPTOLOGICâ SMART START OPTOPLANAR SPM Stealth SuperSOT-3 SuperSOT-6 SuperSOT-8 SyncFET TinyLogic TruTranslation UHC UltraFETâ VCX DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I1