RB154 Glass Passivated Single-Phase Bridge Rectifiers PRODUCT SUMMARY Reverse Voltage 50 to 1000 Volts Forward current 1.5 Amperes FEATURES Surge overload ratings to 40 or 50 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260oC / 10 seconds / 0.375" (9.5mm) lead length at 5 lbs. (2.3 kg) tension Package outline dimensions in inches (millimeters) MECHANICAL DATA Cases: Molded plastic Terminals: solder plated Polarity: As marked Weight: 1.07 grams (RB-15), 1.10 grams (WOB) Pb-free; RoHS-compliant 07/04/2007 Rev.1.00 www.SiliconStandard.com 1 RB154 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols R B 151 R B 152 R B 153 R B 154 R B 155 R B 156 W005 W01 W02 W04 W06 W08 R B 157 W10 W005M W01M W02M W04M W06M W08M W10M Units W005G W01G W02G W04G W06G W08G W10G W005GM W01GM W02GM W04GM W06GM W08GM W10GM 100 200 400 600 800 1000 Volts Maximum recurrent peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TA=50oC IF(AV) 1.5 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM Wxxx or WxxxM 40.0, RB15x, WxxxG & WxxxGM 50.00 Amps Max. instantaneous forward voltage drop per element at 0.75A VF 1.0 Volt Maximum DC reverse current at rated DC blocking voltage per element Typical thermal resistance per leg (Note 1) Operating junction temperature range Storage temperature range Notes: TA=25oC IR 10.0 uA 500 (RB15x, Wxxx, WxxxM @TA=100oC, WxxxG or WxxxGM @TA=125oC) RθJA RθJL 36 13 TJ Wxxx or WxxxM -55 to +125, RB15x, WxxxG & WxxxGM -55 to +150 o C TSTG -55 to +150 o C o C/W 1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2 x 0.2" (5 x 5mm) copper pads 07/04/2007 Rev.1.00 www.SiliconStandard.com 2 RB154 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) - W005 thru W10 (TA = 25oC unless otherwise noted) - W005M thru W10M (TA = 25oC unless otherwise noted) - RB151 thru RB157, W005G thru W10G (TA = 25oC unless otherwise noted) - W005GM thru W10GM Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 07/04/2007 Rev.1.00 www.SiliconStandard.com 3