SB120-SB160 1A Schottky Barrier Rectifiers PRODUCT SUMMARY Voltage ratings available from 20 Volts to 60 Volts DO-204AL/DO-41 FEATURES Metal-Semiconductor junction with guardring Epitaxial construction Low forward voltage drop High current capability The plastic material carries UL recognition 94V-0 For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications MECHANICAL DATA Case : JEDEC DO-204AL(DO-41) molded plastic Polarity : Color band denotes cathode Weight : DO-41 - 0.012 ounce, 0.33 gram Mounting position : Any Dimensions in inches and (millimeters) Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols S B 120 S B 130 S B 140 S B 150 S B 160 Units Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 Volts Maximum RMS voltage VRMS 14 21 28 35 42 Volts Maximum DC blocking voltage V DC 20 30 40 50 60 Volts Maximum average forward rectified current .375" (9.5mm) lead lengths @TL=100oC I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load IFSM 40.0 Amps Maximum forward voltage at 1.0A DC VF Maximum DC reverse current at rated DC blocking voltage @TJ=25oC @TJ=100oC 0.50 0.70 Volts 0.5 10.0 IR mA Typical junction capacitance (Note 1) CJ Typical thermal resistance (Note 2) RθJL 15 TJ -55 to +125 o C TSTG -55 to +150 o C Operating junction temperature range Storage temperature range 110 80 pF o C/W Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal resistance, junction to lead. 11/28/2006 Rev.4.01 www.SiliconStandard.com 1 of 2 SB120-SB160 RATINGS AND CHARACTERISTIC CURVES (T A = 25°C unless otherwise noted) Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 11/28/2006 Rev.4.01 www.SiliconStandard.com 2 of 2