1.27mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type ●HIF3B Series (MIL-C-83503) ●HIF2 Series (Board direct mount type) 1 2 ●HIF5 Series (Card edge type) ■Features 1. Product Variation The connection method is available with the board to board type and insulation displacement type. 2. Broad applications HIF2E, HIF3B and HIF5 can be combined one other, because the 1.27mm pitch flat cable is used. ●RC Series (Micro ribbon connector) ●FD Series (D sub-ribbon connector) 3. Applicable Cables The applicable cable is a (UL2651) AWG #28 flat cable (7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm) 4. Mis-insertion Preventive Structure The mis-insertion preventive guide prevents misinsertion. Photo1 (For further information, refer to catalog page A133.) ■Applications Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines ■Product Specifications Rating Current rating: 0.5A Operating Temperature Range: -55 to +85 ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 125V AC Operating Humidity Range: 40 to 80% Item Operating Humidity Range: 40 to 70% Specification (Note 2) Condition 1.Insulation Resistance 1000M ohms min. 250V DC 2.Withstanding Voltage No flashover or insulation breakdown. 300V AC/1 minute. 3.Contact Resistance 30m ohms max. 0.1A 4.Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle (-65ç: 30 minutes→15 to 35ç: 5 minutes max.→ 125ç: 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 7.Durability (Mating/un-mating) Contact resistance: 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. A116 ■Material Parts Material Finish Remarks Black UL94V-0 Selective gold plating ———— Insulator PBT Socket Contact Copper alloy Pin header Contact Brass ■Ordering Information ●Socket and Receptacle HIF6 A – * D A – 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : Ribbon cable insulation displacement type A : With board mounting hole B : Without board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r D : Socket or receptacle t A : Selective gold plated y Contact pitch : 1.27mm u Contact type : DS : Right angle type DSA : Straight type R : Ribbon cable ID type i L : Board pre-fixed lock pin ●Pin Header HIF6 A – * P A – 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : With lock A : With board mounting hole B : Without board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r P : Pin header t A : Selective gold plated y Contact pitch : 1.27mm u Contact style : DS DSA : Right angle type : Straight type i L : Board pre-fixed lock pin A117 BFunction Chart Pin Header Right Angle Type with lock Socket or Receptacle Side Two pieces of 1.27mm pitch cable used a2.54 pitch connector (MIL-C-83503) HIF2B series HIF3B series HIF5 series Straight Type with lock Ribbon cable FD (D sub) connector Ribbon cable RC30 (Micro ribbon) connector Right Angle Type with mounting hole Straight Type with mounting hole Right Angle Type with mounting hole Straight Type with mounting hole Right Angle Type without mounting hole Right Angle Type without mounting hole Straight Type without mounting hole Straight Type without mounting hole A118 ■Cable ID Connector Unit: mm Unit: mm Part Number CL No. Number of Contacts A B C D HIF6-020D-1.27R 630-0001-4 20 18.55 11.43 13.95 16.35 HIF6-026D-1.27R 630-0002-7 26 22.36 15.24 17.76 20.16 HIF6-032D-1.27R 630-0003-0 32 26.17 19.05 21.57 23.97 HIF6-034D-1.27R 630-0004-2 34 27.44 20.32 22.84 25.24 HIF6-040D-1.27R 630-0005-5 40 31.25 24.13 26.65 29.05 HIF6-050D-1.27R 630-0006-8 50 37.60 30.48 33.00 35.40 HIF6-052D-1.27R 630-0007-0 52 38.87 31.75 34.27 36.67 HIF6-060D-1.27R 630-0008-3 60 43.95 36.83 39.35 41.75 HIF6-068D-1.27R 630-0009-6 68 49.03 41.91 44.43 46.83 HIF6-080D-1.27R 630-0010-5 80 56.65 49.53 52.05 54.45 HIF6-100D-1.27R 630-0011-8 100 69.35 62.23 64.75 67.15 A119 ■Pin Header Right Angle Type with lock Unit: mm n= Number of Contacts 2 Note : Size F indicates the state where the lock is open. BPCB mounting pattern ● Indicate mark position. Mating Side Mating Side Unit: mm A120 Part Number CL No. Number of Contacts A B C D E F HIF6-020PA-1.27DS 630-0051-2 20 30.95 11.43 24.55 18.75 21.59 43.55 HIF6-026PA-1.27DS 630-0052-5 26 34.76 15.24 28.36 22.56 25.40 47.36 HIF6-032PA-1.27DS 630-0053-8 32 38.57 19.05 32.17 26.37 29.21 51.17 HIF6-034PA-1.27DS 630-0054-0 34 39.84 20.32 33.44 27.64 30.48 52.44 HIF6-040PA-1.27DS 630-0055-3 40 43.65 24.13 37.25 31.45 34.29 56.25 HIF6-050PA-1.27DS 630-0056-6 50 50.00 30.48 43.60 37.80 40.64 62.60 HIF6-052PA-1.27DS 630-0057-9 52 51.27 31.75 44.87 39.07 41.91 63.87 HIF6-060PA-1.27DS 630-0058-1 60 56.35 36.83 49.95 44.15 46.99 68.95 HIF6-068PA-1.27DS 630-0059-4 68 61.43 41.91 55.03 49.23 52.07 74.03 HIF6-080PA-1.27DS 630-0060-3 80 69.05 49.53 62.65 56.85 59.69 81.65 HIF6-100PA-1.27DS 630-0061-6 100 81.75 62.23 75.35 69.55 72.39 94.35 ■Pin Header Straight Type with lock Unit: mm Number of Contacts n= 2 BPCB mounting pattern Guide Key Side (20, 32, 40, 52, 60, 68, 80, 100 contacts) (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side ● Indicate mark position. (26, 34, 50 contacts) Note : Size F indicates a state where the lock is open. (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts A B C D E F G HIF6-020PA-1.27DSA 630-0101-9 20 30.95 11.43 24.55 18.75 14.95 21.59 43.55 HIF6-026PA-1.27DSA 630-0102-1 26 34.76 15.24 28.36 22.56 18.76 25.40 47.36 HIF6-032PA-1.27DSA 630-0103-4 32 38.57 19.05 32.17 26.37 22.57 29.21 51.17 HIF6-034PA-1.27DSA 630-0104-7 34 39.84 20.32 33.44 27.64 23.84 30.48 52.44 HIF6-040PA-1.27DSA 630-0105-0 40 43.65 24.13 37.25 31.45 27.65 34.29 56.25 HIF6-050PA-1.27DSA 630-0106-2 50 50.00 30.48 43.60 37.80 34.00 40.64 62.60 HIF6-052PA-1.27DSA 630-0107-5 52 51.27 31.75 44.87 39.07 35.27 41.91 63.87 HIF6-060PA-1.27DSA 630-0108-8 60 56.35 36.83 49.95 44.15 40.35 46.99 68.95 HIF6-068PA-1.27DSA 630-0109-0 68 61.43 41.91 55.03 49.23 45.43 52.07 74.03 HIF6-080PA-1.27DSA 630-0110-0 80 69.05 49.53 62.65 56.85 53.05 59.69 81.65 HIF6-100PA-1.27DSA 630-0111-2 100 81.75 62.23 75.35 69.55 65.75 72.39 94.35 A121 ■Receptacle Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm *Lock pin type is also available. A122 Part Number CL No. Number of Contacts A B C D E HIF6B-20DA-1.27DS 631-0051-9 20 30.95 20.95 11.43 26.67 18.55 HIF6B-26DA-1.27DS 631-0052-1 26 34.76 24.76 15.24 30.48 22.36 HIF6B-32DA-1.27DS 631-0053-4 32 38.57 28.57 19.05 34.29 26.17 HIF6B-34DA-1.27DS 631-0054-7 34 39.84 29.84 20.32 35.56 27.44 HIF6B-40DA-1.27DS 631-0055-0 40 43.65 33.65 24.13 39.37 31.25 HIF6B-50DA-1.27DS 631-0056-2 50 50.00 40.00 30.48 45.72 37.60 HIF6B-52DA-1.27DS 631-0057-5 52 51.27 41.27 31.75 46.99 38.87 HIF6B-60DA-1.27DS 631-0058-8 60 56.35 46.35 36.83 52.07 43.95 HIF6B-68DA-1.27DS 631-0059-0 68 61.43 51.43 41.91 57.15 49.03 HIF6B-80DA-1.27DS 631-0060-0 80 69.05 59.05 49.53 64.77 56.65 ■Receptacle Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts A B C HIF6A-20DA-1.27DS 631-0001-0 20 20.95 11.43 18.55 HIF6A-26DA-1.27DS 631-0002-3 26 24.76 15.24 22.36 HIF6A-32DA-1.27DS 631-0003-6 32 28.57 19.05 26.17 HIF6A-34DA-1.27DS 631-0004-9 34 29.84 20.32 27.44 HIF6A-40DA-1.27DS 631-0005-1 40 33.65 24.13 31.25 HIF6A-50DA-1.27DS 631-0006-4 50 40.00 30.48 37.60 HIF6A-52DA-1.27DS 631-0007-7 52 41.27 31.75 38.87 HIF6A-60DA-1.27DS 631-0008-0 60 46.35 36.83 43.95 HIF6A-68DA-1.27DS 631-0009-2 68 51.43 41.91 49.03 HIF6A-80DA-1.27DS 631-0010-1 80 59.05 49.53 56.65 A123 ■Receptacle Straight Type with Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Mounting hole center line (26, 34, 50 contacts) Unit: mm *Lock pin type is also available. A124 Part Number CL No. Number of Contacts A B C D HIF6B-020DA-1.27DSA 631-0151-3 20 30.95 26.67 11.43 18.55 HIF6B-026DA-1.27DSA 631-0152-6 26 34.76 30.48 15.24 22.36 HIF6B-032DA-1.27DSA 631-0153-9 32 38.57 34.29 19.05 26.17 HIF6B-034DA-1.27DSA 631-0154-1 34 39.84 35.56 20.32 27.44 HIF6B-040DA-1.27DSA 631-0155-4 40 43.65 39.37 24.13 31.25 HIF6B-050DA-1.27DSA 631-0156-7 50 50.00 45.72 30.48 37.60 HIF6B-052DA-1.27DSA 631-0157-0 52 51.27 46.99 31.75 38.87 HIF6B-060DA-1.27DSA 631-0158-2 60 56.35 52.07 36.83 43.95 HIF6B-068DA-1.27DSA 631-0159-5 68 61.43 57.15 41.91 49.03 HIF6B-080DA-1.27DSA 631-0160-4 80 69.05 64.77 49.53 56.65 HIF6B-100DA-1.27DSA 631-0161-7 100 81.75 77.47 62.23 69.35 ■Receptacle Straight Type without Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts A B C HIF6A-020DA-1.27DSA 631-0101-5 20 20.95 11.43 18.55 HIF6A-026DA-1.27DSA 631-0102-8 26 24.76 15.24 22.36 HIF6A-032DA-1.27DSA 631-0103-0 32 28.57 19.05 26.17 HIF6A-034DA-1.27DSA 631-0104-3 34 29.84 20.32 27.44 HIF6A-040DA-1.27DSA 631-0105-6 40 33.65 24.13 31.25 HIF6A-050DA-1.27DSA 631-0106-9 50 40.00 30.48 37.60 HIF6A-052DA-1.27DSA 631-0107-1 52 41.27 31.75 38.87 HIF6A-060DA-1.27DSA 631-0108-4 60 46.35 36.83 43.95 HIF6A-068DA-1.27DSA 631-0109-7 68 51.43 41.91 49.03 HIF6A-080DA-1.27DSA 631-0110-6 80 59.05 49.53 56.65 HIF6A-100DA-1.27DSA 631-0111-9 100 71.75 62.23 69.35 A125 ■Pin Header Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm πLock pin type is also available. A126 Part Number CL No. Number of Contacts A B C D E HIF6B-020PA-1.27DS 631-0251-8 20 30.95 20.95 18.75 11.43 26.67 HIF6B-026PA-1.27DS 631-0252-0 26 34.76 24.76 22.56 15.24 30.48 HIF6B-032PA-1.27DS 631-0253-3 32 38.57 28.57 26.37 19.05 34.29 HIF6B-034PA-1.27DS 631-0254-6 34 39.84 29.84 27.64 20.32 35.56 HIF6B-040PA-1.27DS 631-0255-9 40 43.65 33.65 31.45 24.13 39.37 HIF6B-050PA-1.27DS 631-0256-1 50 50.00 40.00 37.80 30.48 45.72 HIF6B-052PA-1.27DS 631-0257-4 52 51.27 41.27 39.07 31.75 46.99 HIF6B-060PA-1.27DS 631-0258-7 60 56.35 46.35 44.15 36.83 52.07 HIF6B-068PA-1.27DS 631-0259-0 68 61.43 51.43 49.23 41.91 57.15 HIF6B-080PA-1.27DS 631-0260-9 80 69.05 59.05 56.85 49.53 64.77 HIF6B-100PA-1.27DS 631-0261-1 100 81.75 71.75 69.55 62.23 77.47 ■Pin Header Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts A B C HIF6A-020PA-1.27DS 631-0201-0 20 20.95 18.75 11.43 HIF6A-026PA-1.27DS 631-0202-2 26 24.76 22.56 15.24 HIF6A-032PA-1.27DS 631-0203-5 32 28.57 26.37 19.05 HIF6A-034PA-1.27DS 631-0204-8 34 29.84 27.64 20.32 HIF6A-040PA-1.27DS 631-0205-0 40 33.65 31.45 24.13 HIF6A-050PA-1.27DS 631-0206-3 50 40.00 37.80 30.48 HIF6A-052PA-1.27DS 631-0207-6 52 41.27 39.07 31.75 HIF6A-060PA-1.27DS 631-0208-9 60 46.35 44.15 36.83 HIF6A-068PA-1.27DS 631-0209-1 68 51.43 49.23 41.91 HIF6A-080PA-1.27DS 631-0210-0 80 59.05 56.85 49.53 HIF6A-100PA-1.27DS 631-0211-3 100 71.75 69.55 62.23 A127 ■Pin Header Straight Type with Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Mounting hole center line (26, 34, 50 contacts) Unit: mm *Lock pin type is also available. A128 Part Number CL No. Number of Contacts A B C D E HIF6B-020PA-1.27DSA 631-0351-2 20 30.95 26.67 20.95 11.43 18.75 HIF6B-026PA-1.27DSA 631-0352-5 26 34.76 30.48 24.76 15.24 22.56 HIF6B-032PA-1.27DSA 631-0353-8 32 38.57 34.29 28.57 19.05 26.37 HIF6B-034PA-1.27DSA 631-0354-0 34 39.84 35.56 29.84 20.32 27.64 HIF6B-040PA-1.27DSA 631-0355-3 40 43.65 39.37 33.65 24.13 31.45 HIF6B-050PA-1.27DSA 631-0356-6 50 50.00 45.72 40.00 30.48 37.80 HIF6B-052PA-1.27DSA 631-0357-9 52 51.27 46.99 41.27 31.75 39.07 HIF6B-060PA-1.27DSA 631-0358-1 60 56.35 52.07 46.35 36.83 44.15 HIF6B-068PA-1.27DSA 631-0359-4 68 61.43 57.15 51.43 41.91 49.23 HIF6B-080PA-1.27DSA 631-0360-3 80 69.05 64.77 59.05 49.53 56.85 HIF6B-100PA-1.27DSA 631-0361-6 100 81.75 77.47 71.75 62.23 69.55 ■Pin Header Straight Type Without Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts A B C HIF6A-020PA-1.27DSA 631-0301-4 20 20.95 11.43 18.75 HIF6A-026PA-1.27DSA 631-0302-7 26 24.76 15.24 22.56 HIF6A-032PA-1.27DSA 631-0303-0 32 28.57 19.05 26.37 HIF6A-034PA-1.27DSA 631-0304-2 34 29.84 20.32 27.64 HIF6A-040PA-1.27DSA 631-0305-5 40 33.65 24.13 31.45 HIF6A-050PA-1.27DSA 631-0306-8 50 40.00 30.48 37.80 HIF6A-052PA-1.27DSA 631-0307-0 52 41.27 31.75 39.07 HIF6A-060PA-1.27DSA 631-0308-3 60 46.35 36.83 44.15 HIF6A-068PA-1.27DSA 631-0309-6 68 51.43 41.91 49.23 HIF6A-080PA-1.27DSA 631-0310-5 80 59.05 49.53 56.85 HIF6A-100PA-1.27DSA 631-0311-8 100 71.75 62.23 69.55 A129 BConnection Circuit (20, 32, 40, 52, 60, 68, 80, 100 contacts) n= Type A, B Connection of Cable 1 A1 B2 bn 1 ······ 1 bn ······ B1 ······ an an ······ A2 Connection of Cable 2 An a1 Bn b1 Type A, A Connection of Cable 1 A130 Connection of Cable 2 A2 b2 B2 a2 ······ a1 ······ B1 ······ b1 ······ A1 An bn Bn an Number of Contacts 2 BConnection Circuit (26, 40, 50 contacts) n= Type A, B Connection of Cable 1 A1 1 B2 bn bn 1 ······ B1 ······ an ······ an 2 Connection of Cable 2 ······ A2 Number of Contacts An a1 Bn b1 Type A, A A1 b1 B1 a1 A2 b2 B2 a2 ······ ······ ······ Connection of Cable 2 ······ Connection of Cable 1 An bn Bn an A131 BConnection Jig ●Guide Plate ●Hi-Flex Connection Press Hi-Flex Connection Press HHP502 CL550 - 0082 - 2 HIF 6 - GPA CL550 - 0165 - 8 Part Number CL No. Pressing Block A-01 550-0133-1 ●Cable Cutter ●Instruction Manual for HIF6 Connection Service Method HIF6 Cable Cutter-FC601 14 Pages CL550 - 0166 - 0 A132 *Pressing Block ■HIF6 Series: Connection Type Coupled Connector HIF3B Series (MIL-C-83503) ●Compliant with the MIL standard ●The VA idea is reflected on both pin header and socket. ●Products with pull-out tab are available. ●Countermeasures are taken against noises in combination with the applicable cover case. ●The type aligned in single-row, low profile type, is available for pin header locking system, in addition to standard products. Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 HIF2 Series (Board direct mount type) 12-row parallel type (HIF2E) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 2.54mm grid alignment facilitates to the design pattern. 24-row staggered type (HIF2C) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Mounting height is 4.9mm low profile type. 1 2 HIF5 Series (Card edge ribbon type) ●Three types of full hole, semi-hole and no mount area are provided for the unit mount area. ●Connectors are connected in the bus line system. ●Cables can be returned within the connector mold width. Number of contacts: 20, 26, 34, 40, 50, 60 RC Series (Micro ribbon connector) ●Since the cable insulation displacement area is standard pitch 1.27mm, the standard ribbon cable can be easily utilized. ●Countermeasures are taken against noises in combination with the cover case. ●Cover case is light weight and compact. ●Straight and right angle types are installed on the dip side. Number of contacts: 14, 24, 36, 50 FD Series (D sub-ribbon connector) ●The standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a jig, in addition to the same pitch 1.38mm as for the D sub connector. ●The space saving type allows to reduce the thickness on the connection side according to set miniaturization. ●Connectors can be installed from both front and rear sides of the chassis or panel. Number of contacts: 9, 15, 25, 37 A133