1.27mm Pitch Connector Directly Mounted on Board HIF12 Series ■Features 1. Directly Mounted on Board This connector, which is directly mounted on the board, can insulate and displace the 1.27mm pitch flat cable at a time. 2. Broad Connection Using the 1.27mm pitch flat cable, this connector can be combined with HIF2E, HIF3B, HIF5, and HIF6. 3. Applicable Cable The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. :0.8 to 1.0mm). ■Applications Computers, terminal equipment, various kinds of business machines. ■Product Specifications Rating Current rating: 0.5A Operating Temperature Range: -55 to +85ç(Note 1) Storage Temperature Range:-10 to +60ç (Note 2) Voltage rating: 125V AC Operating Moisture Range: -40 to 80% Storage Humidity Range:-40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms min. 250V DC 2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute 3. Contact Resistance 30m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç: 30 minutes ->15 to 35ç: 5 minutes max. (125ç: 30 minutes-> 15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 7. Resistance to Soldering heat No deformation of components affecting performance. Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Part B74 Material Finish Remarks Insulator PBT Black UL94V-0 Contact Beryllium copper Tin-lead plated ––––––– ■Ordering Information HIF12 - * DT - 1.27 R q w q Series Name e r t : HIF 12 w Number of contacts : 34, 40, 50, 52, 60, 68, 80, 100 e Contact alignment : 4-row staggered r Contact Pitch : 1.27mm t R : Ribbon cable BCombination Pattern Unit: mm Number of Contacts 34 40 50 52 60 68 80 100 A 26.06 29.87 36.22 37.49 42.57 47.65 55.27 67.97 B 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 B75 ■40, 52, 60, 68, 80, 100 contacts Body Protector (A) Protector (B) Unit: mm Part Number CL No. Number of Contacts A B C HIF12-040DT-1.27R 660-0005-7 40 29.87 24.13 25.55 HIF12-052DT-1.27R 660-0007-2 52 37.49 31.75 33.17 HIF12-060DT-1.27R 660-0008-5 60 42.57 36.83 38.25 HIF12-068DT-1.27R 660-0009-8 68 47.65 41.91 43.33 HIF12-080DT-1.27R 660-0010-7 80 55.27 49.53 50.95 HIF12-100DT-1.27R 660-0011-0 100 67.97 62.23 63.65 ■34, 50 contacts Body Protector (A) Protector (B) Unit: mm B76 Part Number CL No. Number of Contacts A B C HIF12-34DT-1.27R 660-0004-4 34 26.06 20.32 21.74 HIF12-50DT-1.27R 660-0006-0 50 36.22 30.48 31.90 BHIF12-HIF12 Connection Circuit Diagram 40, 52, 60, 68, 80, 100 contacts ●Type A, B n= number of contacts 2 Note: In the connection circuit diagram as shown, don't connect to pin No. 2.For connection to pin No. 2, contact Hirose PCC Engineering Department. B1 bn A2 an — 1 B2 b n —1 • • • • • • an • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An a1 Bn b1 ●Type A, A B1 a1 A2 b2 B2 a2 • • • • • • b1 • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An bn Bn an B77 BHIF12-HIF6 Connection Circuit Diagram 34, 50 contacts ●Type A, B n= B1 bn A2 an — 1 B2 b n —1 • • • • • • an • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An a1 Bn b1 ●Type A, A B78 B1 a1 A2 b2 B2 a2 • • • • • • b1 • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An bn Bn an number of contacts 2 BHIF12-HIF6 Connection Circuit Diagram 40, 52, 60, 68, 80, 100 contacts ●Type A, B Note: In the connection circuit diagram as shown, don't connect to pin No. 2. For connection to pin No. 2, contact Hirose PCC Engineering Department. B1 bn A2 an — 1 B2 b n —1 • • • • • • an • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An a1 Bn b1 n= number of contacts 2 ●Type A, A B1 a1 A2 b2 B2 a2 • • • • • • b1 • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An bn Bn an B79 BHIF12-HIF12 Connection Circuit Diagram 34, 50 contacts ●Type A, B n= B1 bn A2 an — 1 B2 b n —1 • • • • • • An • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An a1 Bn b1 ●Type A, A B80 B1 a1 A2 b2 B2 a2 • • • • • • b1 • • • • • • A1 • • • • • • Cable 2 Connection • • • • • • Cable 1 Connection An bn Bn an number of contacts 2 BPCB mounting pattern BConnection Jig ●Guide Plate ●Hi-Flex Connection Press Part Number CL No. Part Number CL No. HIF12-GPA 550-0208-9 Hi-Flex Connection Press HHP502 550-0082-2 B81