PG300R THRU PG308R GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT - 3.0 Amperes FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing DO-201AD l l Flame Retardant Epoxy Molding Compound Glass passivated junction in a DO-201AD package 3 ampere operation at TA=55 ¢J with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Fast switching for high efficiency MECHANICAL DATA Case: Molded plastic, DO-201AD Terminals: axial leads, solderable per MIL-STD-202, Method 208 Mounting Position: Any Weight: 0.04 ounce, 1.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PG300R PG301R PG302R PG304R PG306R PG308R UNITS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”, 9.5mm Lead Length at TA=55 ¢J Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage at 3.0A Maximum Reverse Current at Rated DC Ta=25 ¢J Blocking Voltage Ta=100 ¢J Typical Junction capacitance (Note 1) CJ Typical Thermal Resistance (Note 2) R £KJA Maximum Reverse Recovery Time(Note 3) Operating and Storage Temperature Range TA 50 35 50 150 100 70 100 150 200 140 200 400 280 400 3.0 V V V A 125 A 1.3 5.0 300 V £g A 60 22.0 PF ¢J /W ns ¢J 150 150 -55 to +150 600 420 600 250 NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted 3. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A 800 560 800 500 RATING AND CHARACTERISTIC CURVES PG300R THRU PG308R trr +0.5A 0 -0.25 -1.0 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. SET TIME BASE FOR 50 ns/cm Source Impedance = 50 Ohms 1cm 3.0 .375" 9.5mm LENGTH 2.0 1.0 0 25 50 75 100 125 150 175 125 PEAK FORWARD SURGE CURRENT, AMPERES 4.0 NON REPETITIVE 100 50 TJ = 25¢J 25 REPETITIVE 10 1 200 10 50 100 NUMBER OF CYCLES AT 60Hz Fig. 2-FORWARD CURRENT CURVE Fig. 3-PEAK FORWARD SURGE CURRENT INSTANTANEOUS FORWARD CURRENT, AMPERES AMBIENT TEMPERATURE, ¢J 100 TJ =25 ¢J 60 CAPACITANCE, pF AVERAGE FORWARD CURRENT (10)-AMP (10)-AAV Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10 5 1 1 4 10 50 100 REVERSE VOLTAGE, VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE 100 30 10 3.0 TJ = 25 ¢J 1.0 0.3 0.1 0.03 0.01 0.6 0.7 0.8 1.0 1.1 1.2 1.3 INSTANTANEOUS FWD VOLTAGE, VOLTS Fig. 5-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC