Features Regulated Converters ● ● ● ● ● ● ● ● ● ● ● ● 2:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Over Current Protection Continuous Low Profile, 10.2 mm Height No other Components required Five-Sided Shield International Safety Standard Approvals Standard DIP24 and SMD-Pinning 2 Year Warranty No Derating to 71°C Efficiency to 80% POWERLINE DC/DC-Converter RP03S_DC Series 3 Watt DIP24 & SMD, Single & Dual Output Selection Guide 12V, 24V and 48V Input Types Output Voltage VDC Output Current mA Input (4) Current mA Efficiency(5) DIP24 (SMD) Input Range VDC % Capacitive(6) Load max. µF RP03-1205SC** 9-18 5 500 290 76 1000 RP03-1212SC** 9-18 12 250 329 80 220 RP03-1215SC** 9-18 15 200 334 79 150 RP03-2405SC** 18-36 5 500 151 73 1000 RP03-2412SC** 18-36 12 250 169 78 220 RP03-2415SC** 18-36 15 200 171 77 150 RP03-4805SC** 36-75 5 500 75 73 1000 RP03-4812SC** 36-75 12 250 84 79 220 RP03-4815SC** 36-75 15 200 84 80 150 RP03-1205DC** 9-18 ±5 ±250 290 76 ±470 RP03-1212DC** 9-18 ±12 ±125 334 79 ±100 RP03-1215DC** 9-18 ±15 ±100 334 79 ±68 RP03-2405DC** 18-36 ±5 ±250 151 73 ±470 Part Number RP03-2412DC** 18-36 ±12 ±125 174 76 ±100 RP03-2415DC** 18-36 ±15 ±100 171 77 ±68 RP03-4805DC** 36-75 ±5 ±250 76 73 ±470 RP03-4812DC** 36-75 ±12 ±125 85 78 ±100 RP03-4815DC** 36-75 ±15 ±100 86 77 ±68 ** add Suffix SMD for SMD package 174 April-2005 www.recom-international.com POWERLINE RP03-S_DC Series DC/DC-Converter Derating-Graph (Ambient Temperature) RP03-4805SC/M1 RP03-4805SC 125 125 100 100 75 Natural Convection 50 Output Power (%) Output Power (%) 75 25 0 -25 Natural Convection 50 25 -10 0 50 60 70 80 90 100 75 Ambient Temperature Range (°C) 0 -40 -25 -10 0 50 60 70 80 90 100 85 Ambient Temperature Range (°C) Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 12V nominal input 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) Pi Type 12V Input 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) 36VDC 50VDC 100VDC 20mAp-p Start Up Time (nominal Vin and constant resistor load) 350ms typ. Output Power 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) 9-18VDC 18-36VDC 36-75VDC ±0.2% Single Dual Cross Regulation (asymmetrical load 25%/100% FL) ±0.2% ±1% ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 200µS Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table continued on next page www.recom-international.com April-2005 175 POWERLINE RP03-S_DC Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Isolation Voltage In to out I/O to case I/O to case 1.600VDC min. DIP type 1.600VDC min. SMD type 1.000VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 300kHz typ. Operating Temperature Range Standard M1 (see note 3) -25°C to +85°C (with derating) -40°C to +85°C (non-derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 20°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Weight DIP SMD 16g 18g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.139 x 106 Hours MTBF (see note 2) Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering. 176 April-2005 www.recom-international.com POWERLINE RP03-S_DC Series DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 2.54 15.20 Pin Connections 22.90 Pin # Single 1 +Vin 2 +Vin 10 NC 11 NC 12 -Vout 13 +Vout 15 NC 23 -Vin 24 -Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 10 11 12 1 2 Bottom View Dual +Vin +Vin Com Com NC -Vout +Vout -Vin -Vin Pin Pitch Tolerance ±0.35 mm 15 24 23 13 SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 Pin Connections 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com Top View 1 Pin # Single 1 +Vin 2 +Vin 10 NC 11 NC 12 -Vout 13 +Vout 15 NC 23 -Vin 24 -Vin Others NC NC = No Connection Dual +Vin +Vin Com Com NC -Vout +Vout -Vin -Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 April-2005 177