Features Regulated Converters ● ● ● ● ● ● ● ● ● POWERLINE 2:1 Wide Input Voltage Range 1.5 Watts Regulated Output Power 500VDC Isolation Pi Input Filter Low Ripple and Noise Five-Sided Shield Standard DIP24 and SMD-Pinning 2 Year Warranty Efficiency to 55% DC/DC-Converter RP1P5S_DA Series Selection Guide 5V, 12V, 24V Input Types (2) Efficiency (3) (4) Part Number Input Range Output Voltage Output Current Input Current Capacitor Load max. DIP24 (SMD) VDC VDC mA mA % µF RP1P5-0505SA** 4.5-5.5 5 300 600 54 470 RP1P5-0512SA** 4.5-5.5 12 125 625 52 330 RP1P5-0515SA** 4.5-5.5 15 100 588 55 330 RP1P5-1205SA** 10.8-13.2 5 500 245 55 470 RP1P5-1212SA** 10.8-13.2 12 125 260 52 330 RP1P5-1215SA** 10.8-13.2 15 100 245 55 330 RP1P5-2405SA** 21.6-26.4 5 500 125 54 470 RP1P5-2412SA** 21.6-26.4 12 125 130 52 330 RP1P5-2415SA** 21.6-26.4 15 100 123 55 330 RP1P5-0505DA** 4.5-5.5 ±5 200 / -100 682 48 330 RP1P5-0512DA** 4.5-5.5 ±12 ±60 613 51 110 RP1P5-0515DA** 4.5-5.5 ±15 ±50 600 54 110 RP1P5-1205DA** 10.8-13.2 ±5 200 / -100 278 49 330 RP1P5-1212DA** 10.8-13.2 ±12 ±60 255 51 110 RP1P5-1215DA** 10.8-13.2 ±15 ±50 250 54 110 RP1P5-2405DA** 21.6-26.4 ±5 200 / -100 142 48 330 RP1P5-2412DA** 21.6-26.4 ±12 ±60 128 51 110 RP1P5-2415DA** 21.6-26.4 ±15 ±50 125 54 110 9-21 ±15 ±66 2 W output RP2P0-0508SAA 4.5-5.5 8 200 3 kVDC Isolation RP1P5-1206SAA 10-15 6 167 1 kV AC Isolation 1.5 Watt DIP24 & SMD, Single & Dual Output Specials RP2P0-2015DAA-M1** ** add Suffix SMD for SMD package 162 April-2005 www.recom-international.com RP1P5-S_DA Series POWERLINE DC/DC-Converter Derating-Graph (Ambient Temperature) RP1P5-2405SA 125 100 Output Power (%) 75 50 Natural Convection 25 0 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (°C) 71 Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 5V nominal input 12V nominal input 24V nominal input 48V nominal input Input Filter Pi type Output Power 1.5W max. Output Voltage Accuracy (full Load and nominal Vin) ±4% Minimum Load 0% Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) 4.5-5.5VDC 10.8-13.2VDC 21.6-26.4VDC 43.2-52.8VDC ±0.3% 5V Dual outputs others Cross Regulation (asymmetrical load 25%/100% FL) ±1.5% ±0.5% ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 200µS Short Circuit Protection Short term Efficiency see „Selection Guide“ table Isolation Voltage 500VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 30pF max. Operating Frequency 20kHz min. / 300kHz typ. continued on next page www.recom-international.com April-2005 163 POWERLINE RP1P5-S_DA Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Operating Temperature Range -25°C to +71°C Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection Thermal Shock 20°C/Watt MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Weight DIP SMD 16g 18g Dimensions DIP SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 5.531 x 106 Hours MTBF (see note 1) Notes : 1. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40 °C (Ground fixed and controlled environment). 2. Maximum value at nominal input voltage and full load of standard type. 3. Typical value at nominal input voltage and full load. 4. Test by minimum Vin and constant resistor load. 5. See application notes for EMI-filtering. 164 April-2005 www.recom-international.com POWERLINE RP1P5-S_DA Series DC/DC-Converter Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 2.54 15.20 Pin Connections 22.90 Pin # Single 1 + Vin 2 NC 3 NC 10 – Vout 11 + Vout 12 – Vin 13 – Vin 14 + Vout 15 – Vout 22 NC 23 NC 24 + Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 10 11 12 1 2 3 Bottom View 15 14 13 24 23 22 Dual + Vin – Vout Com Com + Vout – Vin – Vin + Vout Com Com – Vout + Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 25.40 Pin area 0.1 x 0.50 2.54 0.50 Pin Connections 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 Top View 1 27.94 Pin # Single 1 + Vin 2 NC 3 NC 10 – Vout 11 + Vout 12 – Vin 13 – Vin 14 + Vout 15 – Vout 22 NC 23 NC 24 + Vin Others NC NC = No Connection Dual + Vin – Vout Com Com + Vout – Vin – Vin + Vout Com Com – Vout + Vin NC Pin Pitch Tolerance ±0.35 mm www.recom-international.com April-2005 165