Features ● ● ● ● ● INNOLINE For Telecom DSM, XDSL, Aplication Internal Pi Filter Multi-Outputs Overcurrent Protection High Efficiency to 86% DC/DC-Converter High Voltage Output Series Selection Guide Part Number RP3.6A2/x1 Input Range (VDC) Output Voltage (VDC) Output Current (mA) Efficiency 36-72 120 30 72 Dimension (%) A2 RP6D2/x1 36-72 20 50 78 D2 RP9.2D2/x1 36-72 92 100 81 D2 RP15.4F2/x2 20-72 110 140 84 F2 RP15.4F2/x1 20-72 140 110 86 F2 RP11.4E1/x1 36-72 190 60 80 E1 RP16.2E1/x1 36-72 267 60 81 E1 Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range See table above: Selection Guide Input Filter Pi Type Voltage Accuracy ±2.0% Ripple and Noise, 20 MHz BW 2% Vout Line Regulation, Full Line Load Regulation, FL-1/4FL ±0.2% ±0.20% (Single) ±2% (Dual) Temperature Coefficient ±0.02%/°C Short Circuit Protection Continuous Isolation Voltage 1600VDC, min. 9 Isolation Resistance 10 Ω Operating Temperature Range -25°C to +71°C Storage Temperature Range -40°C to +85°C Cooling Dimensions 156 Free-air Convection See next page:Package Style and Pinning 25-August-2005 www.recom-international.com INNOLINE High Voltage Input & Output Series DC/DC-Converter Package Style and Pinning (mm) "For detailed datasheets and pinning please ask at our technical customer service." A2 Case: 31.8 x 20.3 x 10.2 mm D2 Case: 50.8 x 25.4 x 9.5 mm 4.6 23 22 3.8 25.40 17.80 31.80 Bottom View 2.5 3 9 10 11 16 15 14 12.70 10.20 10.20 2 3 4 9.50 5 50.80 Bottom View 15.20 10.20 0.25 x 0.50 Rectangular Pin 20.30 20.30 1 dia. 1.0 2 15.20 Pin Pitch Tolerance ±0.35 mm 2.50 5.8 5.10 Pin Pitch Tolerance ±0.5 mm E1 Case: 50.8 x 50.8 x 18 mm 50.80 10.20 10.20 10.20 5 7 6 F2 Case: 50.1 x 40.6 x 10.2 mm 10.20 8 dia. 1.0 9 50.10 18.00 10.20 7.60 10 Bottom View 45.70 25.60 50.80 5.60 dia. 1.0 5 17.80 1 2 4 3 40.60 5.10 7.60 5.10 10.20 10.20 25.40 4.0 min. 15.20 6 1 2 10.20 12.70 Bottom View 7 4 17.80 10.20 8 Pin Pitch Tolerance ±0.4 mm Pin Pitch Tolerance ±0.5 mm www.recom-international.com 25-August-2005 157