Preliminary K6F1616U6M Family CMOS SRAM Document Title 1M x16 bit Super Low Power and Low Voltage Full CMOS Static RAM Revision History Revision No. History Draft Date Remark 0.0 Initial draft August 22, 2000 Preliminary 0.1 Revise - Change package type : from FBGA to TBGA November 21, 2000 Preliminary The attached datasheets are provided by SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserve the right to change the specifications and products. SAMSUNG Electronics will answer to yourquestions about device. If you have any questions, please contact the SAMSUNG branch offices. 1 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM 1M x 16 bit Super Low Power and Low Voltage Full CMOS Static RAM FEATURES GENERAL DESCRIPTION • Process Technology: Full CMOS • Organization: 1M x16 • Power Supply Voltage: 2.7~3.3V • Low Data Retention Voltage: 1.5V(Min) • Three state output • Package Type: 48-TBGA-9.00x12.00 The K6F1616U6M families are fabricated by SAMSUNG′s advanced full CMOS process technology. The families support industrial operating temperature ranges and have chip scale package for user flexibility of system design. The families also support low data retention voltage for battery back-up operation with low data retention current. PRODUCT FAMILY Power Dissipation Product Family Operating Temperature Vcc Range Speed K6F1616U6M-F Industrial(-40~85°C) 2.7~3.3V 551)/70ns Standby (ISB1, Typ.) Operating (ICC1, Max) 2µA 4mA PKG Type 48-TBGA-9.00x12.00 1. The parameter is measured with 30pF test load. 2. Typical value are measured at VCC=3.0V, TA=25°C and not 100% tested. FUNCTIONAL BLOCK DIAGRAM PIN DESCRIPTION 1 2 3 4 5 6 Clk gen. A LB OE A0 A1 A2 Precharge circuit. CS2 Vcc Vss B I/O9 UB A3 A4 CS1 I/O1 C I/O10 I/O11 A5 A6 I/O2 I/O3 D Vss I/O12 A17 A7 I/O4 Vcc E Vcc I/O13 Vss A16 I/O5 Vss F I/O15 I/O14 A14 A15 I/O6 I/O7 G I/O16 A19 A12 A13 WE I/O8 Row Addresses I/O1~I/O8 Row select Data cont Memory Cell Array I/O Circuit Column select Data cont I/O9~I/O16 Data cont Column Addresses H A18 A8 A9 A10 A11 DNU CS1 48-TBGA: Top View (Ball Down) CS2 OE WE Name CS1, CS2 Function Name Function Chip Select Inputs Vcc Power OE Output Enable Input Vss Ground WE Write Enable Input UB Upper Byte(I/O9~16) Address Inputs LB Lower Byte(I/O1~8) A0~A19 I/O1~I/O16 Data Inputs/Outputs DNU Control Logic UB LB Do Not Use SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice. 2 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM PRODUCT LIST Industrial Temperature Products(-40~85°C) Part Name Function K6F1616U6M-EF55 K6F1616U6M-EF70 48-TBGA, 55ns, 3.0V 48-TBGA, 70ns, 3.0V FUNCTIONAL DESCRIPTION CS1 CS2 OE WE LB UB 1) 1) I/O1~8 I/O9~16 Mode Power H X X X X X High-Z High-Z Deselected Standby X1) L X1) X1) X1) X1) High-Z High-Z Deselected Standby X1) X1) X1) X1) H H L H H H L H H H L H L H L L H L H H L H L H L H X1) L L H 1) X L H X1) 1) 1) 1) High-Z High-Z Deselected Standby X High-Z High-Z Output Disabled Active L High-Z High-Z Output Disabled Active H Dout High-Z Lower Byte Read Active L High-Z Dout Upper Byte Read Active L L Dout Dout Word Read Active L H Din High-Z Lower Byte Write Active L H L High-Z Din Upper Byte Write Active L L L Din Din Word Write Active L X 1) 1) 1. X means don′t care. (Must be low or high state) ABSOLUTE MAXIMUM RATINGS1) Item Voltage on any pin relative to Vss Voltage on Vcc supply relative to Vss Power Dissipation Storage temperature Operating Temperature Symbol Ratings Unit VIN,VOUT -0.2 to VCC+0.3V(Max. 3.6V) V VCC -0.2 to 3.6 V PD 1.0 W TSTG -65 to 150 °C TA -40 to 85 °C 1. Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. Functional operation should be restricted to recommended operating condition. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 3 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM RECOMMENDED DC OPERATING CONDITIONS1) Symbol Min Typ Max Unit Supply voltage Item Vcc 2.7 3.0 3.3 V Ground Vss 0 0 0 V Input high voltage VIH 2.2 - Vcc+0.22) V Input low voltage VIL -0.23) - 0.6 V Note: 1. TA=-40 to 85°C, otherwise specified 2. Overshoot: VCC+2.0V in case of pulse width ≤20ns. 3. Undershoot: -2.0V in case of pulse width ≤20ns. 4. Overshoot and undershoot are sampled, not 100% tested. CAPACITANCE1) (f=1MHz, TA=25°C) Item Symbol Test Condition Min Max Unit Input capacitance CIN VIN=0V - 8 pF Input/Output capacitance CIO VIO=0V - 10 pF 1. Capacitance is sampled, not 100% tested DC AND OPERATING CHARACTERISTICS Item Symbol Max Unit Input leakage current ILI VIN=Vss to Vcc -1 - 1 µA Output leakage current ILO CS1=VIH or CS2=VIL or OE=VIH or WE=VIL or LB=UB=VIH, VIO=Vss to Vcc -1 - 1 µA ICC1 Cycle time=1µs, 100%duty, IIO=0mA, CS1≤0.2V, LB≤0.2V or/and UB≤0.2V, CS2≥Vcc-0.2V, VIN≤0.2V or VIN≥VCC-0.2V - - 4 mA ICC2 Cycle time=Min, IIO=0mA, 100% duty, CS1=VIL, CS2=VIH, LB=VIL or/and UB=VIL, VIN=VIL or VIH 70ns - - 35 55ns - - 40 Average operating current Test Conditions Min Typ1) mA Output low voltage VOL IOL = 2.1mA - - 0.4 V Output high voltage VOH IOH = -1.0mA 2.4 - - V ISB1 Other input =0~Vcc 1) CS1≥Vcc-0.2V, CS2≥Vcc-0.2V(CS1 controlled) or 2) 0V≤CS2≤0.2V(CS2 controlled) or 3) LB=UB≥Vcc-0.2V, CS2≥Vcc-0.2V(LB/UB controlled) - 2.0 40 µA Standby Current (CMOS) 1. Typical value are measured at VCC=3.0V, TA=25°C and not 100% tested. 4 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM AC OPERATING CONDITIONS VTM3) TEST CONDITIONS(Test Load and Input/Output Reference) R12) Input pulse level: 0.4 to 2.2V Input rising and falling time: 5ns Input and output reference voltage:1.5V Output load(see right): CL=100pF+1TTL CL=30pF+1TTL CL1) R22) 1. Including scope and jig capacitance 2. R1=3070Ω, R2=3150Ω 3. VTM =2.8V AC CHARACTERISTICS (Vcc=2.7~3.3V, TA=-40 to 85°C) Speed Bins Parameter List Symbol Min Max Min Max 55 - 70 - ns Address access time tAA - 55 - 70 ns Chip select to output tCO1, tCO2 - 55 - 70 ns Output enable to valid output tOE - 25 - 35 ns LB, UB valid to data output tBA - 55 - 70 ns Chip select to low-Z output tLZ1, tLZ2 10 - 10 - ns Output enable to low-Z output tOLZ 5 - 5 - ns LB, UB enable to low-Z output tBLZ 10 - 10 - ns tOH 10 - 10 - ns tHZ1, tHZ2 0 20 0 25 ns Output hold from address change Chip disable to high-Z output OE disable to high-Z output tOHZ 0 20 0 25 ns UB, LB disable to high-Z output tBHZ 0 20 0 25 ns tWC 55 - 70 - ns tCW1, tCW2 45 - 60 - ns Write cycle time Chip select to end of write Write Units 70ns tRC Read cycle time Read 55ns Address set-up time tAS 0 - 0 - ns Address valid to end of write tAW 45 - 60 - ns Write pulse width tWP 40 - 50 - ns Write recovery time tWR 0 - 0 - ns Write to output high-Z tWHZ 0 20 0 20 ns Data to write time overlap tDW 25 - 30 - ns Data hold from write time tDH 0 - 0 - ns End write to output low-Z tOW 5 - 5 - ns LB, UB valid to end of write tBW 45 - 60 - ns DATA RETENTION CHARACTERISTICS Item Symbol Test Condition Vcc for data retention VDR CS1≥Vcc-0.2V1), VIN≥0V Data retention current IDR Vcc=1.5V, CS1≥Vcc-0.2V , VIN≥0V Data retention set-up time tSDR Recovery time tRDR 1) See data retention waveform Min Typ Max Unit 1.5 - 3.3 V 15 µA - 1.0 0 - - tRC - - 2) ns 1. 1) CS1≥Vcc-0.2V, CS2≥Vcc-0.2V(CS1 controlled) or 2) 0≤CS2≤0.2V(CS2 controlled) or 3) LB=UB≥Vcc-0.2V, CS2≥Vcc-0.2V(LB/UB controlled) 2. Typical value are measured at TA=25°C and not 100% tested. 5 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM TIMMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE(1) (Address Controlled, CS1=OE=VIL, CS2=WE=VIH, UB or/and LB=VIL) tRC Address tAA tOH Data Out Data Valid Previous Data Valid TIMING WAVEFORM OF READ CYCLE(2) (WE=VIH) tRC Address tOH tAA tCO CS1 CS2 tHZ tBA UB, LB tBHZ tOE OE tOLZ tBLZ Data out High-Z tOHZ tLZ Data Valid NOTES (READ CYCLE) 1. tHZ and tOHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referenced to output voltage levels. 2. At any given temperature and voltage condition, tHZ(Max.) is less than tLZ(Min.) both for a given device and from device to device interconnection. 6 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM TIMING WAVEFORM OF WRITE CYCLE(1) (WE Controlled) tWC Address tCW(2) tWR(4) CS1 CS2 tAW tBW UB, LB tWP(1) WE tAS(3) tDW Data in tDH Data Valid High-Z tWHZ Data out High-Z tOW Data Undefined TIMING WAVEFORM OF WRITE CYCLE(2) (CS1 Controlled) tWC Address tAS(3) tCW(2) tWR(4) CS1 tAW CS2 tBW UB, LB tWP(1) WE tDW Data Valid Data in Data out tDH High-Z High-Z 7 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM TIMING WAVEFORM OF WRITE CYCLE(3) (UB, LB Controlled) tWC Address tCW(2) tWR(4) CS1 tAW CS2 tBW UB, LB tAS(3) tWP(1) WE tDW Data Valid Data in Data out tDH High-Z High-Z NOTES (WRITE CYCLE) 1. A write occurs during the overlap(tWP) of low CS1 and low WE. A write begins when CS1 goes low and WE goes low with asserting UB or LB for single byte operation or simultaneously asserting UB and LB for double byte operation. A write ends at the earliest transition when CS1 goes high and WE goes high. The tWP is measured from the beginning of write to the end of write. 2. tCW is measured from the CS1 going low to end of write. 3. tAS is measured from the address valid to the beginning of write. 4. tWR is measured from the end or write to the address change. tWR applied in case a write ends as CS1 or WE going high. DATA RETENTION WAVE FORM CS1, LB/UB controlled VCC tSDR Data Retention Mode tRDR 2.7V 2.2V VDR CS1≥VCC - 0.2V, LB=UB≥VCC - 0.2V CS1,LB/UB GND CS2 controlled Data Retention Mode VCC 2.7V CS2 tSDR tRDR VDR CS2≤0.2V 0.4V GND 8 Revision 0.1 November 2000 Preliminary K6F1616U6M Family CMOS SRAM PACKAGE DIMENSION Unit: millimeters 48 BALL TAPE BALL GRID ARRAY(0.75mm ball pitch) Top View Bottom View A1 INDEX MARK B B 0.65 B1 0.65 6 5 4 3 2 1 A #A1 B C C C C1 D E C1/2 F G H B/2 Detail A Side View A Y 0.55/Typ. E1 E 0.35/Typ. E2 D C Min Typ Max A - 0.75 - B 8.90 9.00 9.10 B1 - 3.75 - C 11.90 12.00 12.10 C1 - 5.25 - D 0.40 0.45 0.50 E 0.80 0.90 1.00 E1 - 0.55 - E2 0.30 0.35 0.40 Y - - 0.08 Notes. 1. Bump counts: 48(8row x 6column) 2. Bump pitch : (x,y)=(0.75 x 0.75)(typ.) 3. All tolerence are +/-0.050 unless otherwise specified. 4. Typ : Typical 5. Y is coplanarity: 0.08(Max) 9 Revision 0.1 November 2000