STMICROELECTRONICS TS4040

TS4040
2.5V MICROPOWER SHUNT VOLTAGE REFERENCE
■ 2.5V OUTPUT VOLTAGE
■ ULTRA LOW CURRENT CONSUMPTION:
40µA TYP.
■ HIGH PRECISION @ 25°C
±2% and ±1%
■ HIGH STABILITY WHEN USED WITH
CAPACITIVE LOAD
■ INDUSTRIAL TEMPERATURE RANGE:
-40 to +85°C
■ 150ppm/°C MAXIMUM TEMPERATURE
COEFFICIENT
Z
TO92
(Plastic Package)
DESCRIPTION
The TS4040 is a low power shunt voltage reference providing a stable 2.5V output voltage over
the industrial temperature range (-40 to +85°C).
Available in SOT23-3 surface mount package, it
can be designed in applications where space saving is a critical issue.
The low operating current is a key advantage for
power restricted designs. In addition, the TS4040
is very stable and can be used in a broad range of
application conditions.
L
SOT23-3L
(Plastic Micropackage)
PIN CONNECTIONS (top view)
APPLICATION
■
■
■
■
■
Computers
Instrumentation
Battery chargers
Switch Mode Power Supply
Battery operated equipments
ORDER CODE
Precision
TO92
SOT23-3
2%
TS4040EIZ-2.5 TS4040EILT-2.5
1%
TS4040DIZ-2.5 TS4040DILT-2.5
Single temperature range: -40 to +85°C
SOT23
Marking
L243
L242
Z = TO92 Plastic package - also available in Bulk (Z), Tape & Reel (ZT)
and Ammo Pack (AP)
LT = Tiny Package (SOT23-3) - only available in Tape & Reel (LT)
March 2002
1/10
TS4040
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
Ik
Reverse Breakdown Current
20
mA
If
Forward Current
10
mA
360
625
mW
Pd
Power Dissipation
1)
SOT23-3
TO92
Tstd
Storage Temperature
ESD
Human Body Model (HBM)
Machine Model (MM)
Lead Temperatue (soldering, 10 seconds)
Tlead
-65 to +150
°C
2
200
260
kV
V
°C
1. Pd has been calculated with Tamb = 25°C, Tjunction =150°C andRthja = 200°C/W for the TO92 package
Rthja = 340°C/W for the SOT23-3 package
OPERATING CONDITIONS
Symbol
Parameter
Value
Unit
Ikmin
Minimum Operating Current
60
µA
Ikmax
Maximum Operating Current
15
mA
Toper
Operating Free Air Temperature Range
-40 to +85
°C
2/10
TS4040
ELECTRICAL CHARACTERISTICS
TS4040E (2% Precision)
Tamb = 25°C (unless otherwise specified)
Symbol
Parameter
Reverse Breakdown Voltage
Vk
Ikmin
Reverse Breakdown Voltage Tolerance
Minimum Operating Current
∆Vref/∆T Average Temperature Coefficient
∆Vk/∆Ik
Reverse Breakdown Voltage Change
with Operating Current Range
Rka
Reverse Static Impedance
Kvh
Long Term Stability
En
Wide Band Noise
Test Condition
Ik = 100µA
Ik = 100µA
-40°C < T < +85°C
T = 25°C
-40°C < T < +85°C
Ik = 100µA
Ikmin < Ik < 1mA
-40°C < T < +85°C
1mA < Ik < 15mA
-40°C < T < +85°C
Ik = Ikmin to 1mA
-40°C < T < +85°C
Ik = 1 to 15mA
-40°C < T < +85°C
Ik = 100µA, t = 1000hrs
Ik = 100µA
10Hz < f < 10kHz
Min.
Typ.
Max.
Unit
2.45
-50
-74
2.5
2.55
50
74
65
70
150
1
1.2
8
10
1
1.2
0.6
0.7
V
40
30
0.4
2.5
0.4
0.2
mV
µA
ppm/°C
mV
Ω
120
ppm
35
µVrms
Note: Limits are 100% production tested at 25°C. Limits over temperature are guaranteed through correlation and by design.
ELECTRICAL CHARACTERISTICS
TS4040D (1% Precision)
Tamb = 25°C (unless otherwise specified)
Symbol
Parameter
Reverse Breakdown Voltage
Vk
Ikmin
Reverse Breakdown Voltage Tolerance
Minimum Operating Current
∆Vref/∆T Average Temperature Coefficient
∆Vk/∆Ik
Reverse Breakdown Voltage Change
with Operating Current Range
Rka
Reverse Static Impedance
Kvh
Long Term Stability
En
Wide Band Noise
Test Condition
Ik = 100µA
Ik = 100µA
-40°C < T < +85°C
T = 25°C
-40°C < T < +85°C
Ik = 100µA
Ikmin < Ik < 1mA
-40°C < T < +85°C
1mA < Ik < 15mA
-40°C < T < +85°C
Ik = Ikmin to 1mA
-40°C < T < +85°C
Ik = 1mA to 15mA
-40°C < T < +85°C
Ik = 100µA, t = 1000hrs
Ik = 100µA
10Hz < f < 10kHz
Min.
Typ.
Max.
Unit
2.475
-25
-49
2.5
2.525
25
49
65
70
150
1
1.2
8
10
1
1.2
0.6
0.7
V
40
30
0.4
2.5
0.4
0.2
mV
µA
ppm/°C
mV
Ω
120
ppm
35
µVrms
Note: Limits are 100% production tested at 25°C. Limits over temperature are guaranteed through correlation and by design.
3/10
TS4040
Minimum operating current
Reference voltage versus cathode current
3
15
Cathode voltage (V)
Cathode current (mA)
2.5
10
5
0
T=+25°C
2
T=+85°C
1.5
T=-40°C
1
0.5
-5
0
-0.5
0
0.5
1
1.5
2
2.5
0
20
Cathode voltage (V)
40
Cathode current (µA)
2.58
R
Ik=(Vin-Vref)/R
Vout=Vref
Vin
Cathode voltage (V)
Test circuit
2.56
+2%
2.54
+1%
2.52
2.5
2.48
-1%
2.46
-2%
2.44
2.42
-40
-20
0
20
40
60
80
Temperature (°C)
Static impedance (Rka) versus
temperature
Noise voltage versus Frequency
1500
Noise voltage (nV/VHz)
Static impedance (Ohms)
0.2
0.15
0.1
0.05
0
-40
CL=10µF
1000
CL=1µF
500
CL=100nF
CL=0
0
-20
0
20
40
Temperature (°C)
4/10
CL=100µF
60
80
0.1
1000.0
10.0
1.0
100.0
Frequency (KHz)
TS4040
Pulse response for Ik=100µA
5
Test circuit for pulse response at Ik=100µA
25k ohm
Input
Intput
Pulse
Generator
Output
Ik=100µA
0
2.5
Output
0
0
5
Pulse response for Ik=100µA
Detailed part
10
Time (µs)
15
20
Pulse response for Ik=100µA
Detailed part
5V
Input
5V
Input
0V
2.5V
Output
0V
2.5V
Output
0V
0V
0
0.5
1
Time (µs)
1.5
2
0
1
2
3
Time (µs)
4
5
Pulse response for Ik=1mA
5V
Input
Test circuit for pulse response at Ik=1mA
2.5k ohm
Output
Pulse
Generator
Intput
Ik=1mA
0V
2.5V
Output
0V
0
1
2
3
4
5
Time (µs)
5/10
TS4040
Pulse response for Ik=1mA
Detailed part
Pulse response for Ik=1mA
Detailed part
5V
5V
Input
Input
0V
2.5V
0V
2.5V
Output
Output
0V
0V
0
50
100
Time (ns)
6/10
150
200
0
0.2
0.4
0.6
Time (µs)
0.8
1
TS4040
PACKAGE MECHANICAL DATA
3 PINS - PLASTIC PACKAGE TO92 (TAPE & REEL)
A1
P
T
P
A
H
W2
W
W1
W0
H0
I1
H
L1
H1
d
D0
F1 F2
P2
P0
Millimeters
Inches
Dim.
Min
AL
A
T
d
I1
P
PO
P2
F1/F2
∆h
∆P
W
W0
W1
W2
H
H0
H1
DO
L1
Typ.
Max.
Min.
Typ.
5.0
5.0
4.0
0.197
0.197
0.157
0.45
2.5
11.7
12.4
5.95
2.4
-1
-1
17.5
5.7
8.5
12.7
12.7
6.35
2.5
0
0
18.0
6
9
15.5
16
3.8
4.0
Max.
0.018
13.7
13
6.75
2.8
1
1
19.0
6.3
9.75
0.5
20
16.5
25
4.2
11
0.098
0.461
0.488
0.234
0.094
-0.039
-0.039
0.689
0.224
0.335
0.500
0.500
0.250
0.098
0
0
0.709
0.236
0.354
0.610
0.630
0.150
0.157
0.539
0.512
0.266
0.110
0.039
0.039
0.748
0.248
0.384
0.020
0.787
0.650
0.984
0.165
0.433
7/10
TS4040
PACKAGE MECHANICAL DATA
3 PINS - PLASTIC PACKAGE TO92 (TAPE AMMO PACK)
A1
P
T
P
A
H
W2
W
W1
W0
H0
I1
H
L1
H1
d
D0
F1 F2
P2
P0
Millimeters
Inches
Dim.
Min
AL
A
T
d
I1
P
PO
P2
F1/F2
∆h
∆P
W
W0
W1
W2
H
H0
H1
DO
L1
8/10
Typ.
Max.
Min.
Typ.
5.0
5.0
4.0
0.197
0.197
0.157
0.45
2.5
11.7
12.4
5.95
2.4
-1
-1
17.5
5.7
8.5
12.7
12.7
6.35
2.5
0
0
18.0
6
9
15.5
16
3.8
4.0
Max.
0.018
13.7
13
6.75
2.8
1
1
19.0
6.3
9.75
0.5
20
16.5
25
4.2
11
0.098
0.461
0.488
0.234
0.094
-0.039
-0.039
0.689
0.224
0.335
0.500
0.500
0.250
0.098
0
0
0.709
0.236
0.354
0.610
0.630
0.150
0.157
0.539
0.512
0.266
0.110
0.039
0.039
0.748
0.248
0.384
0.020
0.787
0.650
0.984
0.165
0.433
TS4040
PACKAGE MECHANICAL DATA
3 PINS - PLASTIC PACKAGE TO92 (BULK)
Millimeters
Inches
Dim.
Min
L
B
O1
C
K
O2
a
3.2
4.45
4.58
12.7
0.407
0.35
Typ.
Max.
Min.
1.27
3.7
5.00
5.03
4.2
5.2
5.33
0.5
0.508
0.126
0.1752
0.1803
0.5
0.016
0.0138
Typ.
Max.
0.05
0.1457
0.1969
0.198
0.1654
0.2047
0.2098
0.0197
0.02
9/10
TS4040
PACKAGE MECHANICAL DATA
3 PINS - TINY PACKAGE (SOT23)
D
k
GAUGE
PLANE
e
L
E
E1
L1
0.25
b
c
C
e1
0.10
SEATING
PLANE
A1
A
A2
C
Millimeters
Inches
Dimensions
Min.
A
A1
A2
b
c
D
E
E1
e
e1
L
L1
k
0.890
0.010
0.880
0.300
0.080
2.800
2.100
1.200
0.400
0°
Typ.
0.950
2.900
1.300
0.950
1.900
0.500
0.540
Max.
Min.
1.120
0.100
1.020
0.500
0.200
3.040
2.640
1.400
0.035
0.0004
0.600
0.016
Typ.
0.037
0.012
0.003
0.110
0.083
0.047
0.114
0.051
0.037
0.075
0.020
0.021
Max.
0.044
0.004
0.040
0.020
0.008
0.120
0.104
0.055
0.024
8°
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2002 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States
© http://www.st.com - United Kingdom
10/10