FREESCALE MC12058

Freescale Semiconductor, Inc.Order this document by MC12058/D
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
The MC12058 is a low power ÷126/128, ÷254/256 dual modulus
prescaler. Motorola’s advanced Bipolar MOSAIC V technology is utilized to
achieve low power dissipation of 3.0 mW at a minimum supply voltage of
2.7 V. The MC12058 can be operated down to a minimum supply voltage of
2.7 V required for battery operated portable systems.
On–chip output termination provides 250 µA (typical) output current to
drive a 8.0 pF (typical) high impedance load. The Divide Ratio Control input,
SW, permits selection of divide ratio as desired. A HIGH on SW selects
÷126/128; an OPEN on SW selects ÷254/256. The Modulus Control input,
MC, selects the proper divide number after SW has been biased to select the
desired divide ratio.
• 1.1 GHz Toggle Frequency
•
•
•
•
MECL PLL COMPONENTS
÷126/128, ÷254/256
LOW POWER
DUAL MODULUS PRESCALER
SEMICONDUCTOR
TECHNICAL DATA
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
Supply Voltage 2.7 to 5.5 V
Low Power 1.1 mA Typical at VCC = 3.0 V
8
Operating Temperature Range of –40 to 85°C
1
On–Chip Output Termination
D SUFFIX
PLASTIC PACKAGE
CASE 751
(SO–8)
MOSAIC V is a trademark of Motorola
FUNCTIONAL TABLE
SW
MC
Divide Ratio
H
H
126
H
L
128
L
H
254
L
L
256
PIN CONNECTIONS
IN
VCC
SW
OUT
NOTES: 1. SW: H = VCC, L = Open. A logic L can also be applied by grounding this pin,
but this is not recommended due to increased power consumption.
2. MC: H = 2.0 V to VCC, L = GND to 0.8 V.
8
2
7
3
6
4
5
IN
NC
MC
Gnd
(Top View)
MAXIMUM RATINGS
Characteristic
1
Symbol
Range
Unit
VCC
–0.5 to 7.0
Vdc
TA
–40 to 85
°C
Storage Temperature Range
Tstg
–65 to 150
°C
Modulus Control Input, Pin 6
MC
–0.5 to VCC
Vdc
Device
Operating
Temp Range
Package
Maximum Output Current, Pin 4
IO
4.0
mA
MC12058D
TA = – 40 to 85°C
SO–8
Power Supply Voltage, Pin 2
Operating Temperature Range
NOTE:
ORDERING INFORMATION
ESD data available upon request.
 Motorola, Inc. 1998
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
Go to: www.freescale.com
Rev 5
1
Freescale Semiconductor,
Inc.
MC12058
Characteristic
Symbol
Min
Typ
Max
Unit
ft
0.1
1.4
1.1
GHz
Supply Current Output (Pin 2)
ICC
–
1.1
2.0
mA
Modulus Control Input HIGH (MC)
VIH1
2.0
–
VCC + 0.5
V
Modulus Control Input LOW (MC)
VIL1
Gnd
–
0.8
V
Divide Ratio Control Input HIGH (SW)
VIH2
VCC – 0.5
VCC
VCC + 0.5
V
Divide Ratio Control Input LOW (SW)
VIH2
Open
Open
Open
–
Output Voltage Swing (Note 1)
Vout
0.8
1.1
–
Vpp
Modulus Setup Time MC to OUT at 1100 MHz
tset
–
11
16
ns
Vin
100
400
–
–
1000
1000
mVpp
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Toggle Frequency (Sine Wave Input)
NOTE:
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
Input Voltage Sensitivity
250–1100 MHz
100–250 MHz
Assumes 8.0 pF high impedance load.
Figure 1. Logic Diagram (MC12058)
In
In
D
QB
C
Q
D
QB
D
QB
C M Q
C
Q
MC
D
QB
1
0
C
Q
D
QB
D
QB
C
Q
C
Q
D
Q
D
QB
C
QB
C
Q
SW
Out
2
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA
Go to: www.freescale.com
ARCHIVE INFORMATION
ELECTRICAL CHARACTERISTICS (VCC = 2.7 to 5.5 V; TA = –40 to 85°C, unless otherwise noted.)
Freescale Semiconductor,
Inc.
MC12058
Figure 2. Modulus Setup Time
ARCHIVED BY FREESCALE SEMICONDUCTOR,
INC. 2005
Prop. Delay
In
Out
MC Setup
MC
Modulus setup time MC to out is the MC
setup or MC release plus the prop delay.
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
MC Release
Figure 3. AC Test Circuit
VCC = 2.7 to 5.5 V
C3
Sine Wave Generator
C1
VCC
SW
IN
50 Ω
OUT
C2
CL
IN
MC
GND
EXTERNAL COMPONENTS
C1 = C2 = 1000 pF
C3 = 0.1 µF
CL = 8.0 pF (Including Scope
and jig capacitance)
MC Input
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
Go to: www.freescale.com
3
Freescale Semiconductor,
Inc.
MC12058
Figure 4. Input Signal Amplitude versus Input Frequency
+10.0
+707.11
+5.0
+397.64
0
+223.61
–5.0
+125.74
–10.0
+70.71
–15.0
+39.76
–20.0
+22.36
–25.0
+12.57
–30.0
+7.07
–35.0
+3.98
–40.0
+2.24
–45.0
+1.26
–50.0
mVrms
+1257.40
+0.71
0
250
500
750
1000
1250
1500
1750
2000
FREQUENCY (MHz)
Divide Ratio = 126; VCC = 5.5 V; TA = 25°C
Figure 5. Output Amplitude versus Input Frequency
2000
1200
800
mVpp
1600
400
0
0
250
500
750
1000
1250
1500
1750
2000
FREQUENCY (MHz)
4
For More Information On This Product, MOTOROLA RF/IF DEVICE DATA
Go to: www.freescale.com
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
AMPLITUDE (dBm)
+15.0BY FREESCALE SEMICONDUCTOR, INC. 2005
ARCHIVED
Freescale Semiconductor,
Inc.
MC12058
Figure 6. Typical Input Impedance versus Input Frequency
ARCHIVED BY FREESCALE
SEMICONDUCTOR, INC. 2005
300
200
R
100
MHz
0
–100
OHMS
–300
ARCHIVE INFORMATION
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
–200
–400
–500
–600
–700
–800
jX
–900
–1000
–1100
–1200
100
200
300
400
500
600
700
800
900
1000
MOTOROLA RF/IF DEVICE DATA For More Information On This Product,
Go to: www.freescale.com
1100
1200
5
Freescale Semiconductor,
Inc.
MC12058
OUTLINE DIMENSIONS
D SUFFIX
ARCHIVED BY FREESCALE SEMICONDUCTOR,
INC. 2005
PLASTIC PACKAGE
CASE 751–06
(SO–8)
ISSUE T
8
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. DIMENSIONS ARE IN MILLIMETER.
3. DIMENSION D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE B DIMENSION AT MAXIMUM MATERIAL
CONDITION.
C
5
0.25
H
E
M
B
M
1
4
h
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Freescale Semiconductor, Inc...
ARCHIVE INFORMATION
B
X 45 _
e
q
A
C
SEATING
PLANE
L
0.10
A1
B
0.25
C B
M
S
A
S
DIM
A
A1
B
C
D
E
e
H
h
L
q
MILLIMETERS
MIN
MAX
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
4.80
5.00
3.80
4.00
1.27 BSC
5.80
6.20
0.25
0.50
0.40
1.25
0_
7_
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
ARCHIVE INFORMATION
D
A
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141,
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: [email protected] – TOUCHTONE 1–602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
6
MC12058/D
◊For More Information On This Product, MOTOROLA RF/IF DEVICE
DATA
Go to: www.freescale.com