VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A FEATURES • High voltage • Industrial standard package • Low thermal resistance • UL approved file E78996 • Compliant to RoHS Directive 2002/95/EC • Designed and qualified for industrial level ADD-A-PAK BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRODUCT SUMMARY IF(AV) 60 A Type Modules - Diode, High Voltage • Up to 1600 V • High surge capability • Easy mounting on heatsink MECHANICAL DESCRIPTION The ADD-A-PAK generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS 114 °C I2t 50 Hz 1300 60 Hz 1360 50 Hz 8.44 60 Hz 7.68 I2t VRRM TJ TStg Document Number: 94625 Revision: 09-Mar-11 Range UNITS 60 94 IF(RMS) IFSM VALUES A kA2s 84.5 kA2s 400 to 1600 V - 40 to 150 °C For technical questions, contact: [email protected] www.vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A Vishay Semiconductors ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 04 400 500 06 600 700 VSK.56 08 800 900 10 1000 1100 12 1200 1300 14 1400 1500 16 1600 1700 IRRM MAXIMUM AT TJ = 150 °C mA 10 FORWARD CONDUCTION PARAMETER Maximum average forward current at case temperature Maximum RMS forward current SYMBOL IF(AV) IF(RMS) TEST CONDITIONS 180° conduction, half sine wave DC at 90 °C case temperature t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I 2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t No voltage reapplied UNITS 60 A 114 °C 94 1300 No voltage reapplied 100 % VRRM reapplied VALUES 1360 A 1090 Sinusoidal half wave, intitial TJ = TJ maximum 100 % VRRM reapplied 1140 8.44 7.68 5.97 kA2s 5.43 t = 0.1 ms to 10 ms, no voltage reapplied 84.5 Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.74 High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.86 kA2s V Low level value of forward slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 3.94 High level value of forward slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 3.43 VFM IFM = x IF(AV), TJ = 25 °C, tp = 400 μs square wave 1.6 V SYMBOL TEST CONDITIONS VALUES UNITS 10 mA 3000 (1 min) 3600 (1 s) V Maximum forward voltage drop m BLOCKING PARAMETER Maximum peak reverse leakage current IRRM TJ = 150 °C Maximum RMS insulation voltage VINS 50 Hz www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction and storage temperature range TEST CONDITIONS TJ, TStg VALUES UNITS - 40 to 150 °C Maximum internal thermal resistance, junction to case per leg RthJC DC operation 0.33 Typical thermal resistance, case to heatsink per module RthCS Mounting surface flat, smooth and greased 0.1 °C/W A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. to heatsink Mounting torque ± 10 % busbar Approximate weight Case style JEDEC 4 Nm 3 75 g 2.7 oz. ADD-A-PAK Gen. VII (TO-240AA) R CONDUCTION PER JUNCTION DEVICES VSK.56 SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION 180° 120° 90° 60° 30° 180° 120° 90° 60° 30° 0.115 0.136 0.173 0.236 0.346 0.09 0.145 0.185 0.243 0.349 UNITS °C/W Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: [email protected] www.vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A RthJC (DC) = 0.33°C/W 140 130 120 180° 120° 90° 60° 30° 110 100 0 Maximum allowable case temperature (°C) Maximum average forward power loss (W) 150 10 20 30 40 50 60 80 180° 120° 90° 60° 30° 60 RMS limit 100 DC 40 20 Per leg, Tj = 150°C 0 0 20 40 60 80 100 Average forward current (A) Average forward current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - Foward Power Loss Characteristics 150 RthJC (DC) = 0.33°C/W 140 130 120 180° 120° 90° 60° 30° 110 1200 At any rated load condition and with rated Vrrm applied following surge Initial Tj = Tj max @ 60 Hz 0.0083 s @ 50 Hz 0.0100s 1000 800 600 400 Per leg 200 100 0 20 40 60 80 1 100 10 100 Number of equal amplitude half cycle current pulses (N) Average forward current (A) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current 1400 90 180° 120° 90° 60° 30° 80 70 60 Peak half sine wave forward current (A) Maximum average forward power loss (W) 120 70 Peak half sine wave forward current (A) Maximum allowable case temperature (°C) Vishay Semiconductors RMS limit 50 40 30 20 10 Per leg, Tj = 150°C 0 0 10 20 30 40 50 60 70 1200 1000 Maximum Non-repetitive Surge Current Versus Pulse Train Duration. Initial Tj = 150°C No Voltage Reapplied Rated Vrrm reapplied 800 600 400 Per leg 200 0.01 Average forward current (A) Fig. 3 - Forward Power Loss Characteristics www.vishay.com 4 0.1 1 Pulse train duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions, contact: [email protected] Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A 0 120 Maximum total forward power loss (W) Vishay Semiconductors RthSA = 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 2 °C/W 3 °C/W 7 °C/W 0 100 80 0 180° (Sine) DC 60 0 40 0 20 VSK.56 Series 0 Per leg, Tj = 150°C 0 0 20 40 60 80 0 100 0 20 Total RMS output current (A) 40 60 80 100 120 140 160 Maximum allowable ambient temperature (°C) Fig. 7 - Forward Power Loss Characteristics Maximum total power loss (W) 500 RthSA = 0.1 °C/W 0.2 °C/W 0.3 °C/W 0.5 °C/W 1 °C/W 180° (sine) 180° (rect) 400 300 200 100 2 x VSK.56 Series single phase bridge connected Tj = 150°C 0 0 20 40 60 80 100 120 140 160 0 20 Total output current (A) 40 60 80 100 120 140 160 Maximum allowable ambient temperature (°C) Fig. 8 - Forward Power Loss Characteristics Maximum total power loss (W) 500 RthSA = 0.3°C/W 0.4 °C/W 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 3 °C/W 400 120° (rect) 300 200 100 3 x VSK.56 Series three phase bridge connected Tj = 150°C 0 0 20 40 60 80 100 120 140 160 0 20 Total output current (A) 40 60 80 100 120 140 160 Maximum allowable ambient temperature (°C) Fig. 9 - Forward Power Loss Characteristics Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: [email protected] www.vishay.com 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A Vishay Semiconductors Instantaneous forward current (A) 1000 Per leg 100 10 Tj = 150°C Tj = 25°C 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Instantaneous forward voltage (V) Transient thermal impedance Z thJC (°C/W) Fig. 10 - Forward Voltage Characteristics 1 Steady state value RthJC = 0.33 °C/W (DC operation) 0.1 Per leg 0.01 0.001 0.01 0.1 1 10 Square wave pulse duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VSK D 56 1 2 3 / 16 4 1 - Module type 2 - Circuit configuration (see Circuit Configuration table) 3 - Current code (60 A) 4 - Voltage code (see Voltage Ratings table) Note • To order the optional hardware go to www.vishay.com/doc?95172 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A Vishay Semiconductors CIRCUIT CONFIGURATION CIRCUIT DESCRIPTION CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING VSKD... ~ + (1) Two diodes doubler circuit (2) (3) D 3 2 1 VSKC... + - Two diodes common cathodes (2) (1) (3) C 3 2 1 VSKJ... Two diodes common anodes + + (2) (1) (3) J 2 3 1 VSKE... + - (2) Single diode (3) E 2 3 1 LINKS TO RELATED DOCUMENTS Dimensions Document Number: 94625 Revision: 09-Mar-11 www.vishay.com/doc?95369 For technical questions, contact: [email protected] www.vishay.com 7 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 24 ± 0.5 (1 ± 0.020) 6.7 ± 0.3 (0.26 ± 0.012) Viti M5 x 0.8 Screws M5 x 0.8 Document Number: 95369 Revision: 11-Nov-08 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1