MOS FET Relays G3VM-2(F)L Analog-switching MOS FET Relays with 350-V Load Voltage and Current Limit. • A 4-pin Relay available with the same terminal-pin position as 4-pin photocouplers. • Approved standards: UL1577 (File No. E80555) • RoHS Compliant. ■ Application Examples • Electronic automatic exchange systems • Cordless telephones • Multi-functional telephones • Measurement devices Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Load voltage (peak value) Terminals PCB terminals 350 VAC Model Current limit G3VM-2L Surface-mounting terminals Yes Number per stick Number per tape 100 --- --- 1,500 G3VM-2FL G3VM-2FL(TR) ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-2L G3VM-2FL 4.58±0.25 6.4±0.25 4.58±0.25 6.4±0.25 7.62±0.25 0.8±0.25 7.62±0.25 +0.15 3.65 −0.25 +0.15 3.65 −0.25 Note: The actual product is marked differently from the image shown here. 1.2±0.15 0.5±0.1 2.5 min. 2.54±0.25 7.85 to 8.80 Weight: 0.26 g Note: The actual product is marked differently from the image shown here. 4.0 +0.25 −0.2 1.0 min. +0.1 0.25 −0.05 1.2±0.15 1.0 min. 10.0 max. 2.54±0.25 Weight: 0.26 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-2L 4 3 1 2 ■ PCB Dimensions (Bottom View) G3VM-2L 2.54 Four 0.8-dia. holes (0.56) G3VM-2FL 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-2FL 2.54 2.54 8.3 to 8.8 (0.1) (0.56) (0.1) 1.3 1.5 MOS FET Relays G3VM-2(F)L 31 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Output Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 μs pulses, 100 pps LED forward current reduction Δ IF/°C rate −0.5 mA/°C Ta ≥ 25°C V Note: LED reverse voltage VR 6 Connection temperature Tj 125 °C Load voltage (AC peak/DC) VOFF 350 V Continuous load current IO 120 mA ON current reduction rate Δ ION/°C −1.2 mA/°C Connection temperature Tj 125 °C VI-O 2,500 Vrms AC for 1 min Dielectric strength between input and output (See note 1.) 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ≥ 25°C Operating temperature Ta −40 to +85 °C With no icing or condensation Storage temperature Tstg −55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 °C 10 s ■ Electrical Characteristics (Ta = 25°C) Item Input Minimum Symbol Typical Maximum Measurement conditions Unit LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 μA VR = 6 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 1 3 mA IO = 120 mA RON --- 22 35 Ω IF = 5 mA, IO = 120 mA Output Maximum resistance with output ON Current leakage when the relay is open ILEAK --- Capacity between terminals 0.0005 1.0 μA COFF --- 40 --- pF V = 0, f = 1MHz ILIM 150 --- 300 mA IF = 5 mA, VDD = 5 V, t = 5 ms Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Turn-ON time tON --- 0.25 1.0 ms Turn-OFF time tOFF --- 0.15 1.0 ms IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 280 V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO --- --- 100 mA Operating temperature − 20 --- 65 °C 32 Ta MOS FET Relays G3VM-2(F)L 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 AC/DC 1 4 2 3 Load RL VDD VOUT VOFF = 350 V Limit current Item Note: IF VOUT 10% t ON 90% t OFF ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 40 20 -20 0 20 40 60 80 120 90 60 30 0 -40 100 -20 Ambient temperature Ta (ഒ) 0 20 80 On-state resistance RON (Ω) Ta = 25ഒ I F = 5mA 90 60 30 0 -30 -60 -90 0 0.5 25 20 15 10 1.0 1.5 0 -40 2.0 -20 0 20 Turn ON, Turn OFF time tON, tOFF (μS) Ta=25°C VDD = 20V R L = 200Ω tOFF 100 tON 10 LED forward current IF (mA) 100 80 100 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -40 -20 0 300 tOFF 200 tON 0 20 40 20 40 60 80 100 Current leakage vs. Ambient temperature I LEAK - Ta VDD = 20V RL = 200Ω IF = 5 mA -20 1.8 Ambient temperature Ta (ഒ) 400 100 -40 1.6 1.3 tON, tOFF - Ta 1000 1.4 I O = 120m A t<1s 1.4 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (μS) 60 1.5 Ambient temperature Ta (ഒ) Turn ON, Turn OFF time vs. LED forward current 1 40 1.2 IFT - Ta I O = 120 mA I F = 5 mA t<1s On-state voltage VON (V) 10 1 Trigger LED forward current vs. Ambient temperature Current leakage ILEAK (nA) -0.5 0.8 LED forward voltage VF (V) -120 -1.0 0.1 0.6 100 5 -1.5 1 RON - Ta 150 -150 -2.0 Ta = 25ഒ 10 On-state resistance vs. Ambient temperature IO - VON Continuous load current IO (mA) 60 100 Ambient temperature Taഒ Continuous load current vs. On-state voltage 120 40 Trigger LED forward current I F T (mA) 0 -40 IF - VF 150 LED forward current I F (mA) 60 Continuous load current I O (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage 60 80 100 100 VOFF = 350V 10 1 0.1 20 Ambient temperature Ta (ഒ MOS FET Relays 40 60 80 100 Ambient temperature Ta (ഒ) G3VM-2(F)L 33 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X302-E-1 MOS FET Relays 12/10 Specifications subject to change without notice G3VM-2(F)L Printed in USA