S2A - S2M CREAT BY ART 2.0 AMPS Surface Mount Rectifiers SMB/DO-214AA Pb RoHS COMPLIANCE Features UL Recognized File # E-326243 For surface mounted application Glass passivated chip junction Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 High temperature soldering: 260℃/10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminal: Pure tin plated, lead free Polarity: Indicated by cathode band G = Green Compound Packing: 12mm tape per EIA STD RS-481 Y = Year Weight: 0.093 grams M = Work Month S2X = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol S2A S2B S2D S2G S2J S2K S2M Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL=100℃ IF(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 50 A VF 1.15 V Maximum Instantaneous Forward Voltage (Note 1) @ 2A Maximum Reverse Current @ Rated VR T A=25 ℃ T A=125 ℃ IR 1 uA 125 Maximum Reverse Recovery Time (Note 2) Trr 1.5 uS Typical Junction Capacitance (Note 3) Cj 30 pF RθjA RθjL 53 16 TJ - 55 to + 150 O C - 55 to + 150 O C Typical Thermal Resistance (Note 4) Operating Temperature Range Storage Temperature Range TSTG O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Note 4: PCB Mount on 10mm x 10mm Copper Pad Area Version:D11 C/W RATINGS AND CHARACTERISTIC CURVES (S2A THRU S2M) FIG. 2 TYPICAL REVERSE CHARACTERISTICS FIG.1 FORWARD CURRENT DERATING CURVE 10 2 1.5 1 RESISTIVE OR INDUCTIVE LOAD 0.5 0 0 20 40 60 80 100 120 LEAD TEMPERATURE (oC) 140 160 INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) 2.5 TA=125℃ 1 TA=100℃ 0.1 TA=25℃ 0.01 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0 PEAK FORWARD SURGE URRENT (A) 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 8.3mS Single Half Sine Wave JEDEC Method 10 1 10 NUMBER OF CYCLES AT 60 Hz 10 FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) FIG. 5 TYPICAL FORWARD CHARACTERISRICS 100 INSTANTANEOUS FORWARD CURRENT (A) 1 10 TA=25℃ f=1.0MHz Vsig=50mVp-p 1 1 0.1 TA=25℃ Pulse Width=300us 1% Duty Cycle 0.01 0.1 1 10 REVERSE VOLTAGE (V) 100 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 Version:D11 1.8