UNISONIC TECHNOLOGIES CO., LTD UC8383 CMOS IC STEP-UP DC/DC CONVERTER DESCRIPTION The UTC UC8383 is a high efficiency VFM controlled step-up DC/DC converter. The UTC UC8383 is designed to have low start up voltage and low quiescent current: The UTC UC8383 can realize the conversion from the input voltage to the selected output voltage (2.5V ~ 5.0V) only using an inductor, a diode and an output capacitor. Its typical applications include: cellular telephones, pagers, video camera, PDA and hand held instruments, palmtop, notebook computer, portable equipment and battery powered equipment. FEATURES * 0.8V Start-Up Voltage * Low Supply Current of Typical be18μA * Wide Output Voltage Range of 2.5V~5.0V * Output Voltage Accuracy ±2% * Output Current Up to 100mA * Low Ripple and Low Noise * High Efficiency Up to 85% * Low Profile and Minimum External Components ORDERING INFORMATION Ordering Number Lead Free Halogen Free UC8383L-xx-AB3-R UC8383G-xx-AB3-R UC8383L-xx-AB3-R Package SOT-89 Pin Assignment 1 2 3 VSS VOUT LX (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AB3: SOT-89 (3)Voltage Code (3) xx: refer to Marking Information (4)Lead Free (4) G: Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd Packing Tape Reel 1 of 10 QW-R502-204.D UC8383 MARKING INFORMATION PACKAGE SOT-89 CMOS IC VOLTAGE CODE 25:2.5V 27:2.7V 28:2.8V 30:3.0V 33:3.3V 36:3.6V 50:5.0V MARKING Voltage Code Date Code UC8383 1 2 L: Lead Free G: Halogen Free 3 PIN DESCRIPTION PIN NO 1 2 3 PIN NAME VSS VOUT LX DESCRIPTION GND. Output voltage monitor, IC internal supply voltage Switch pin UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 10 QW-R502-204.D UC8383 CMOS IC BLOCK DIAGRAM OUT LX VIX Limiter VREF Error Amplifier UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw VFM Control Oscillator 3 of 10 QW-R502-204.D UC8383 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Output Voltage Input Voltage LX Pin Voltage LX Pin Output Current Power Dissipation (Ta=25°С) Derating Rate over Ta=25°C RATINGS UNIT 5.5 V 5.5 V 5.5 V Internally limited 170 mW PD 1.7 °С/mW Operating Junction Temperature TJ -25 ~ +85 °С Storage Temperature TSTG -55 ~ +125 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Case SYMBOL VOUT VIN VLX ILX SYMBOL θJC RATINGS 17 UNIT °С/W ELECTRICAL CHARACTERISTICS (IOUT = 10mA, Ta = 25°С, unless otherwise specified.) UC8383-2.5V (VIN = 1.5V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note 1) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η UC8383-2.7V (VIN =1.6V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η UC8383-2.8V (VIN =1.7V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η TEST CONDITIONS IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3V MIN 2.45 IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3.3V 18 850 0.5 120 80 82 MIN 2.646 IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3.3V IOUT = 50mA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 2.7 0.8 MAX 2.754 1.2 0.6 18 850 0.5 120 80 82 IOUT = 50mA TEST CONDITIONS MAX 2.55 1.2 0.6 IOUT = 50mA TEST CONDITIONS TYP 2.5 0.8 MIN 2.744 TYP 2.8 0.8 MAX 2.856 1.2 0.6 18 850 0.5 120 80 82 UNIT V V V µA mΩ µA KHz % % UNIT V V V µA mΩ µA KHz % % UNIT V V V µA mΩ µA KHz % % 4 of 10 QW-R502-204.D UC8383 CMOS IC ELECTRICAL CHARACTERISTICS(Cont.) UC8383-3.0V (VIN = 1.8V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η UC83830-3.3V (VIN = 2V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η TEST CONDITIONS IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3.5V MIN 2.94 IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3.8V MAX 3.06 1.2 0.6 18 850 0.1 120 80 82 IOUT = 50mA TEST CONDITIONS TYP 3 0.8 MIN 3.234 TYP 3.3 0.8 0.5 MAX 3.366 1.2 0.6 18 850 0.5 120 80 84 IOUT = 50mA UNIT V V V µA mΩ µA KHz % % UNIT V V V µA mΩ µA KHz % % UC83830-3.6V (VIN = 2V) PARAMETER Output Voltage Start-up Voltage (VIN-VF) (Note) Hold-on Voltage Supply Current Internal Switch RDS(ON) Internal Leakage Current Maximum Oscillator Frequency Oscillator Duty Cycle Efficiency SYMBOL VOUT VSTART VHOLD ISUPPLY RLX ILX(LEAK) fOSC Dty η TEST CONDITIONS IOUT = 1mA IOUT = 1mA IOUT = 0 ILX = 150mA VLX = 4V, VOUT = 3.8V IOUT = 50mA MIN 3.528 TYP 3.6 0.8 MAX 3.672 1.2 0.6 18 850 0.5 120 80 84 UNIT V V V µA mΩ µA KHz % % UC83830-5.0V (VIN = 3V) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Output Voltage VOUT 4.9 5.0 5.1 V Start-up Voltage (VIN-VF) (Note) VSTART IOUT = 1mA 0.8 1.2 V Hold-on Voltage VHOLD IOUT = 1mA 0.6 V Supply Current ISUPPLY IOUT = 0 18 µA Internal Switch RDS(ON) RLX ILX = 150mA 700 mΩ Internal Leakage Current ILX(LEAK) VLX = 4V, VOUT = 5.5V 0.1 0.5 µA Maximum Oscillator Frequency fOSC 120 KHz Oscillator Duty Cycle Dty 80 % Efficiency η IOUT = 50mA 85 % Note: The minimum value of the device start-up voltage is strictly a function of the forward voltage (VF) of the diode. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 10 QW-R502-204.D UC8383 CMOS IC TYPICAL APPLICATION D L VIN VOUT Lx OUT UTC UC8383 CIN VSS COUT Application Circuit Application Circuit Notes: 1. The inductors: an inductor value of 47µH performs well in this application. 2. The diode: an high switching speed and low forward voltage diode. 3. The input capacitor: A value of 4.7µF tantalum capacitor is enough to guarantee stability. 4. The output capacitor: The best choice for the value of the output capacitance is 47µF tantalum capacitor. And the capacitance value should be in the range of about 10µF-100µF. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 10 QW-R502-204.D UC8383 CMOS IC TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 10 QW-R502-204.D UC8383 CMOS IC TYPICAL CHARACTERISTICS(Cont.) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 10 QW-R502-204.D UC8383 CMOS IC TYPICAL CHARACTERISTICS(Cont.) Output Waveform of LX VIN=2.5V, ILOAD=1mA, VOUT=3.6V Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division Output Waveform of LX VIN=2.5V, ILOAD=50mA, VOUT=3.6V Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division Output Waveform of LX VIN=2.5V, ILOAD=200mA, VOUT=3.6V Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Output Waveform of LX VIN=2.5V, ILOAD=10mA, VOUT=3.6V Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division Output Waveform of LX VIN=2.5V, ILOAD=100mA, VOUT=3.6V Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division Output Waveform of LX Under Maximum Frequency VOUT=3.6V, focs1=112.8kHz, Dty:82.5% Upper Trace: Output Voltage, 1V/Division Lower Trace: LX Mode Voltage, 1V/Division 9 of 10 QW-R502-204.D UC8383 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 of 10 QW-R502-204.D