2.00mm HEADERS & SHUNTS .079" [2.00] CENTERLINE Adam Technologies, Inc. 2PH SERIES D2PH-1 (SMT) PIN 1 D2PH-1-SMT A = .079" [2.00] x No. of positions B = .079" [2.00] x No. of spaces .079 [2.00] TYPE B PIN 1 .079 [2.00] TYPE A D2PH-1-12-U-.100/SMT/.240 A B Recommended PCB Layout C B .079 [2.00] .033 [0.85] .079 [2.00] E .079 [2.00] .079 [2.00] .092 [2.35] .185 [4.70] .129 [3.27] .165 [4.20] .020 [0.50] Sq. B .079 [2.00] .033 [0.85] .092 TYPE B [2.35] TYPE A SMT-A SMT-B D2PH-2-SMT A = .079" [2.00] x No. of positions B = .079" [2.00] x No. of spaces PIN 2 RECOMENDED PCB LAYOUT D2PH-2 (SMT) .157 [4.00] PIN 1 A B .079 [2.00] D2PH-2-16-U-.145/SMT/.360 Recommended PCB Layout C B .079 [2.00] .079 [2.00] .033 [0.85] E .079 [2.00] .129 [3.27] .079 [2.00] MS2B MS2B MS2A MS2A WITH RIGID SHORT HANDLE WITH FLEXIBLE LONG HANDLE .374 [9.50] .078 [2.00] .157 [4.00] MS2H-2 MS2H-2 .157 [4.00] .197 [5.00] .157 [4.00] .441 [11.20] .177 [4.50] .078 [2.00] RECOMENDED PCB LAYOUT .138 [3.50] .177 [4.50] MS2H-1 MS2H-1 .102 [2.60] .078 [2.00] .157 [4.00] .078 [2.00] MS2C MS2C .079 [2.00] .079 [2.00] .157 [4.00] .264 [6.70] .244 [6.20] .020 [0.50] Sq. .177 [4.50] .079 [2.00] .078 [2.00] .079 [2.00] 909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM 249