Document 195-1 Chip Inductors – 0603CS Series (1608) 100 90 70 Q factor 12 nH 33 nH 80 68 nH 60 120 110 100 90 80 70 60 50 40 30 3.9 nH 25°C Typical Q vs Frequency Irms Derating Percent of rated Irms Ultra-small size, exceptional Q and high SRFs make these inductors ideal for high frequency applications where size is at a premium. They also have excellent DCR and current carrying characteristics. 20 10 270 nH 0 50 -40 40 -20 0 20 30 10 0 100 1000 10000 A Frequency (MHz) Typical L vs Frequency E terminal A B C max max max 400 270 nH 350 60 80 100 C B overall 20 10 40 120 140 Ambient temperature (°C) 120 nH H D F I G J F I Recommended Land Pattern Terminal wraparound: approx 0.007/0,18 both ends D ref E F G H I J 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm Inductance (nH) 300 250 200 120 nH 150 68 nH 100 33 nH 50 12 nH 3.9 nH 0 10 100 1000 Frequency (MHz) 10000 Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 3.2 – 3.7 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7″ reel Paper tape: 8 mm wide, 1.0 mm thick, 2 mm pocket spacing PCB washing Only pure water or alcohol recommended Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 195-1 Revised 10/14/09 Document 195-2 Designer’s Kits C324A and B contain 10 each of all 5% values Designer’s Kits C324A-2 and B-2 contain 10 each of all 2% values 0603CS Series (1608) Part number1 0603CS-1N6X_L_ 0603CS-1N8X_L_ 0603CS-2N2X_L_ 0603CS-3N3X_L_ 0603CS-3N6X_L_ 0603CS-3N9X_L_ 0603CS-4N3X_L_ 0603CS-4N7X_L_ 0603CS-5N1X_L_ 0603CS-5N6X_L_ 0603CS-6N8X_L_ 0603CS-7N5X_L_ 0603CS-8N2X_L_ 0603CS-8N7X_L_ 0603CS-9N5X_L_ 0603CS-10NX_L_ 0603CS-11NX_L_ 0603CS-12NX_L_ 0603CS-15NX_L_ 0603CS-16NX_L_ 0603CS-18NX_L_ 0603CS-22NX_L_ 0603CS-23NX_L_ 0603CS-24NX_L_ 0603CS-27NX_L_ 0603CS-30NX_L_ 0603CS-33NX_L_ 0603CS-36NX_L_ 0603CS-39NX_L_ 0603CS-43NX_L_ 0603CS-47NX_L_ 0603CS-51NX_L_ 0603CS-56NX_L_ 0603CS-68NX_L_ 0603CS-72NX_L_ 0603CS-82NX_L_ 0603CS-R10X_L_ 0603CS-R11X_L_ 0603CS-R12X_L_ 0603CS-R15X_L_ 0603CS-R18X_L_ 0603CS-R20X_L_ 0603CS-R21X_L_ 0603CS-R22X_L_ 0603CS-R25X_L_ 0603CS-R27X_L_ 0603CS-R33X_L_ 0603CS-R39X_L_ Inductance2 (nH) 1.6 @ 250 MHz 1.8 @ 250 MHz 2.2 @ 250 MHz 3.3 @ 250 MHz 3.6 @ 250 MHz 3.9 @ 250 MHz 4.3 @ 250 MHz 4.7 @ 250 MHz 5.1 @ 250 MHz 5.6 @ 250 MHz 6.8 @ 250 MHz 7.5 @ 250 MHz 8.2 @ 250 MHz 8.7 @ 250 MHz 9.5 @ 250 MHz 10 @ 250 MHz 11 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 16 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 23 @ 250 MHz 24 @ 250 MHz 27 @ 250 MHz 30 @ 250 MHz 33 @ 250 MHz 36 @ 250 MHz 39 @ 250 MHz 43 @ 250 MHz 47 @ 200 MHz 51 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 72 @ 150 MHz 82 @ 150 MHz 100 @ 150 MHz 110 @ 150 MHz 120 @ 150 MHz 150 @ 150 MHz 180 @ 100 MHz 200 @ 100 MHz 210 @ 100 MHz 220 @ 100 MHz 250 @ 100 MHz 270 @ 100 MHz 330 @ 100 MHz 390 @ 100 MHz Percent Q tolerance3 min4 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 24 16 13 35 22 22 22 20 20 26 27 28 30 28 28 31 30 35 35 34 35 38 38 36 40 37 40 37 40 38 38 35 38 37 34 34 34 32 32 28 25 25 27 25 25 26 25 25 900 MHz L typ Q typ 1.7 GHz L typ Q typ SRF min5 (GHz) DCR max6 (Ohms) 1.67 1.83 2.22 3.31 3.72 3.95 4.32 4.72 4.93 5.77 6.75 7.70 8.25 8.86 9.7 10.0 11.0 12.3 15.4 16.2 18.7 22.8 24.1 24.5 29.2 31.4 36.0 39.4 42.7 47.0 52.2 55.5 62.5 80.5 82.0 96.2 124 138 166 250 305 — — — — — — — 1.65 1.86 2.24 3.38 3.71 3.96 4.33 4.75 4.95 6.05 7.10 7.82 8.37 9.32 9.92 10.6 11.5 13.5 16.8 17.3 21.4 26.1 28.0 28.7 34.6 39.9 49.5 52.7 60.2 64.9 77.2 82.2 97.0 168 135 177 — — — — — — — — — — — — 12.5 12.5 12.5 5.90 5.90 6.90 5.90 5.80 5.70 4.76 5.80 4.80 4.20 4.60 5.40 4.80 4.00 4.00 4.00 3.30 3.10 3.00 2.85 2.65 2.80 2.25 2.30 2.08 2.20 2.00 2.00 1.90 1.90 1.70 1.70 1.70 1.40 1.35 1.30 0.990 0.990 0.900 0.895 0.900 0.822 0.830 0.900 0.780 0.030 0.045 0.250 0.045 0.063 0.080 0.063 0.116 0.140 0.075 0.110 0.106 0.115 0.109 0.135 0.130 0.130 0.130 0.170 0.170 0.170 0.190 0.190 0.190 0.220 0.220 0.220 0.250 0.250 0.280 0.280 0.270 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.920 1.25 1.98 2.06 2.10 3.55 2.16 3.89 4.35 1. When ordering, specify tolerance, termination and packaging codes: 0603CS-R39XJLW Tolerance: G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W= 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 49 35 31 75 53 49 50 47 47 63 60 60 82 62 59 66 53 72 64 55 70 73 71 45 74 47 67 47 60 44 62 69 56 54 53 54 49 43 39 25 22 — — — — — — — 63 50 44 88 65 67 70 57 56 80 81 65 87 58 61 83 56 83 89 52 69 71 67 39 65 28 42 24 40 21 35 34 26 21 20 21 — — — — — — — — — — — — 700 700 100 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 400 400 400 300 300 280 240 200 200 200 120 170 100 100 Red Black Yellow Blue Red Brown Orange Violet Green Black Red Brown Orange Yellow Blue Orange Gray Yellow Green White Blue Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Orange Yellow Green Blue Violet Gray White Black Green Gray Brown Violet Red Blue Yellow 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at the same frequency as inductance using an Agilent/ HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Irms7 Color (mA) dot Document 195-2 Revised 10/14/09