HRS W.FL-2LP-04N1T-A-L

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
W.FL Series
Up to 6 GHz Transmission Speed
Occupied Mounting Area
■Features
1. Nominal mated height of 1.4 mm (Max. 1.5 mm)
2. Small mounting area
Mated height comparison (with U.FL Series)
The receptacle occupies an area of 3.4mm2.
3. Lightweight
4. Accepts high frequency transmission.
To meet the frequency requirements of a wide variety of
miniature devices, the connectors offer high frequency
performance from DC to 6 GHz, with a V.S.W.R. of
1.35max.
1.9
1.4
W.FL-LP-040
(MAX2.0)
U.FL-LP(V)-040
5.6 mg
18.6 mg
(MAX1.55)
Receptacle:
Right-angle plug:
W.FL Series
U.FL Series
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic placement
equipment.
6. Plugs are terminated with ultra-fine coaxial
(fluorinated resin insulated) cable
W. FL Plug and Receptacle
Standard ultra-fine coaxial cable of 0.81 mm diameter
(single braid shielding) is used for the plug termination,
assuring secure and stable connections.
7. Simple connector mating / unmating
Plug
Use of available extraction tool assures correct
disconnection of the plug and receptacle.
1.4
Tactile click sensation confirms fully mated condition,
assuring complete electrical and mechanical connection.
Cable
(MAX1.55)
8. Verification of the fully mated condition
2.85
Dia. 0.81
W.FL-R-SMT-1
Receptacle
■Applications
Cellular phones, PHS, mobile phones, wireless
communication devices, electronic measuring instruments,
GPS, wireless LAN, Bluetooth and any application requiring
high frequency transmission using small coaxial connectors.
2009.2w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued
Please check
the products–status
on theMated
Hirose website
RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL
Series●Ultra
SmallorSurface
Mountsoon.
Coaxial
Connectors
1.4mm
Height
■Specifications
Nominal characteristic impedance
50 ohms
Operating temperature range
-40°C to +90°C
DC to 6 GHz
Operating humidity
90% RH max.
Ratings
Frequency range
Item
Specification
Conditions
1. Contact resistance
Center contact: 20m ohms max.
Outer contact: 10m ohms max.
10mA max.
2. Insulation resistance
500M ohms min.
100V DC
3. Withstanding voltage No flashover or insulation breakdown
4. V.S.W.R.*
200V AC / 1 minute
1.3 Max.
1.35 Max.
Up to 3 GHz
3 to 6 GHz
5. Durability
Contact resistance
Center contact: 25m ohms max.
Outer contact: 15m ohms max.
No damage, cracks, or parts dislocation
20 cycles
6. Vibration
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
Frequency: 10 to 100 Hz, single amplitude of 1.5mm
Acceleration: 59 m/s2, in each of 3 axis
5 cycles
7. Shock
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
Acceleration of 735 m/s2, 11 ms continuous time
Waveform: sine half-wave, 3 cycles in each of the
3 axis
8. Humidity
Insulation resistance: 10M ohms min. (high humidity)
Insulation resistance: 500M ohms min. (dry)
No damage, cracks, or parts dislocation
96 hours at temperature of +40°C and humidity of 95%
9. Temperature cycle
No damage, cracks, or parts dislocation
Contact resistance: 25m ohms max. (Center)
15m ohms max. (Outer)
Temperature:-40°C/+5°C to +35°C/+90°C/+5°C to +35°C
Time: 30 min./ 3 min. / 30 min. / 3 min.
5 cycles
10. Salt spray test
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
Measured as shown on the block diagram below.
Network Analyzer
Test Set
Test Port
D.U.T
Termination
Note1: Measurement way of a W.FL Cable assembly (plug)
W.FL Cable assembly (plug) is measured with SMA conversion adapters
mated with W.FL plugs at both ends of a 100cm coaxial cable harness
Note2: Measurement way of a W.FL receptacle
W.FL receptacle, which is mounted on a 50 ohms glass epoxy board, is
measured with a SMA conversion adapter.
Test Port Cable
■Materials / Finishes
●Plug – right angle
Material
Finish
Remarks
Shell
Part
Phosphor bronze
Silver plated
-------
Female center contact
Phosphor bronze
Gold plated
-------
PBT
Color: Black
UL94V-0
Material
Finish
Remarks
Insulator
●Receptacle
Part
Male center contact
Insulator
Shell
2
Brass
Gold plated
-------
LCP
Color: Black
UL94V-0
Phosphor bronze
Silver plated
-------
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the W.FL
productsSeries●Ultra
status on the Hirose
websiteSurface
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales Height
representative.
Small
Mount
Coaxial Connectors
– 1.4mm
Mated
■Receptacle
BRecommended PCB
mounting pattern
0.85
0.3
0.25
2.6
2
0.5
1.3
0.3
1.7
1.3
1.4
1.5
SIG
1.3
1.7
GND
0.65
2
Note : Receptacles of (10) specification are sold by the reel
(2,000 pieces).
Order by reel.
SIG
GND
No conductive traces in this area
Recommended screen thickness: 0.1mm to 0.12mm
All dimensions: mm
Part Number
CL No.
Packaging
W.FL-R-SMT-1(10)
CL331-0482-6-10
Reel (2000 pieces/reel)
W.FL-R-SMT-1(40)
CL331-0482-6-40
Reel (5000 pieces/reel)
Weight / EA
RoHS
5.6 mg
YES
BPackaging Specifications
Ø1
4
Center contact terminal
12
5.5
1.75
2
.5
Embossed Carrier Tape Dimensions
8
Unreeling direction
Reel Dimensions
14
1.8
14
1.8
Ø13
Ø330
Ø21
Ø330
Ø
13
Ø21
W.FL-R-SMT-1(10):
Reel material: Corrugated board
W.FL-R-SMT-1(40):
Reel material: Plastic
All dimensions: mm
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please
the products status
on the
Hirose website
RoHSCoaxial
search at www.hirose-connectors.com,
or contact
Hirose sales represent
W.FLcheck
Series●Ultra
Small
Surface
Mount
Connectors – 1.4mm
Matedyour
Height
2
■Plug Assembly (Plug)
1.15
2.85
All dimensions: mm
Plugs can be ordered only as terminated cable assemblies.
■How to Specify Plug Cable Assembly
Double-ended cable assembly
Single-ended cable assembly
L
L
●Ordering Information
●Standard tolerances for (L) (Note 2)
W.FL -- 2LP -- 04N [ ] T -- A -- (L)
1
1 Series name
2 Assembly type
2
3
4
5
W.FL
LP
: Single ended
2LP : Double ended
3 Cable type
04N : Dia. 0.81mm ultra-fine coaxial cable
4 Cable color
1: White, 2: Black
5 Total length (mm)
Length (L)
(L)
Standard Tolerance
L=35mm to 200mm
±4mm (Note 1)
L=200mm to 500mm
±8mm
L=500mm to 1000mm
±12mm
L= Longer than 1000mm
±1.5% of (L)
Note1:Minimum available length (L) is 35mm
Note2:Contact nearest HRS representative if different
tolerances are required.
Note3:Contact Nearest HRS representative if one end
requires preparation.
Part No. of Cable Assembly
Description
RoHS
W.FL-2LP-04N1T-A-(L)
Dia. 0.81mm double ended coaxial cable, color: white
YES
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please
the products status
on the
Hirose website
RoHSCoaxial
search at www.hirose-connectors.com,
or contact
Hirose sales represent
W.FLcheck
Series●Ultra
Small
Surface
Mount
Connectors – 1.4mm
Matedyour
Height
■Conversion Adapters
● SMA Conversion Adapter (W.FL side jack – SMA side plug)
(10.3)
8HEX
W.FL
SMA
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
Part No.
CL No.
RoHS
HRMP-W.FLJ(40)
311-0367-3-40
YES
● SMA Conversion Adapter (W.FL side plug – SMA side jack)
13.8
6
( 4.05 )
5.6
Ø6.35
SMA
W.FL
1/4-36UNS-2A
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
Part No.
CL No.
RoHS
HRMJ-W.FLP(40)
311-0368-6-40
YES
● SMA Conversion Adapter
( 18.35
)
( 4)
5.5
Ø6.35
6
1/4-36UNS-2A
Note:When mating with corresponding part (W.FLR-SMT-1) it must be pressed down and held
to make complete connection.
Part No.
CL No.
RoHS
HRMJ-W.FLP-ST1(40)
311-0386-8-40
YES
■Plug Extraction Tool
( 100 )
40
5)
( Ø1
Part No.
CL No.
RoHS
W.FL-LP-N
331-0492-0
YES
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued
Please check
the products–status
on theMated
Hirose website
RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL
Series●Ultra
SmallorSurface
Mountsoon.
Coaxial
Connectors
1.4mm
Height
■Precautions
1. Plug
(1) Mating / unmating
• Unmating
Insert both ends of the extraction tool under the plug (from the direction opposite to the Cable
termination), as shown and pull-up in the direction perpendicular to the mounting surface of the
receptacle.
W.FL-LP-N plug extraction tool
●Recomended the use of the extraction tool for unmating.
Any attempt of unmating by pulling on the cable may result in
W.FL Cable
Assembly
damage and affect the mechanical / electrical performance.
• Mating
Do not attempt to insert on an extreme angle.
(2) Pull forces on the
cable after connectors
are mated
W.FL-R-SMT-1
∞
W.FL-LP-040
Cable Assembly
W.FL-R-SMT-1
Receptacle
After the connectors are mating, do not apply
a load to the cable in excess of the values
indicated in the diagram.
2N max
∞
(3) Precautions
Do not twist connectors excessively during mating / unmating.
2. Receptacle
(1) Recommended reflow
temperature profile
250 ç max. for
10 seconds
[ç]
260
240
220
200
180
160
140
120
100
80
Preheat
(130 to 180ç)
120 seconds max.
230ç
220ç
50 seconds max.
60 seconds max.
Time
q The temperature of the printed circuit board surface temperature at the points of contact with the terminals.
w Reflow soldering should be performed at a printed circuit surface temperature of 250°C max.
e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and
board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations.
(2) Manual soldering
Soldering iron temperature: 350°C, Soldering time: for 5 seconds max.
(3) Recommended metal
mask thickness
0.1 mm to 0.12 mm
(4) Reflow cycles
2 times
3. Operating environment and storage conditions
(1) Operating environment
The connectors are not designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
• Environments having large rapid variations in temperature.
(2) Storage conditions Receptacle
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
®
6
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 02/2009. Contents are subject to change without notice for the purpose of improvements.