58 MINIATURE POWER RELAY • • • • • • International Standard Foot Print Compact High Performance High Capacity Dust Protected / Sealed Version CSA Certified (File No. 106405-1) Suitable DIN Rail and PCB Sockets Available SPECIFICATIONS : Silver Alloy Contact Rating Rated Voltage : 230 VAC/28 VDC Maximum Voltage : 440 VAC/220 VDC Maximum Continuous Current at 230VAC/24VDC 1 Form A (K type) : 16 A 1 Form C (K type) : 10A (NC) / 16A (NO) 1 Form C (Std) : 10A 2 Form C : 5A Maximum Power Rating AC Voltage (1CK/1C/2C) : 3680/2500/1150 VA Nominal Coil Power : 0.5W (approx) Operating Power : 0.32W (approx) Life Expectancy Coil Resistance at 200C Ohms ± 10% Contact Material Drop-out Voltage VDC (Min) I Form A/ I Form C (K type) 2 Form C Pick-up Voltage VDC (Max) : I Form A, I Form C, HOW TO ORDER Nominal Voltage VDC Contact Arrangement COIL DATA 5 6 9 12 18 24 48 4.00 4.80 7.20 9.60 14.40 19.20 38.40 0.5 0.6 0.9 1.2 1.8 2.4 4.8 50 72 160 285 640 1150 3300 DRILLING PATTERN 58 : 10 operations Electrical : 10 operations at rated load Insulation Resistance - XXX Specialities if any Nil - Dust Protected E - Sealed 1A 1C 1AK 1CK 2C 1 Form A (K type) - 1 FORM A (10A) 1 FORM C (10A) 1 FORM A (16A) 1 FORM C(C10/16A) 2 FORM C (5A) 1 Form C (K type) 2 Form C 1 Form C (Std) Limiting Curve for Power Load 50 1C : 100 milli Ohms 3.5 Contact Current (A) Between Open Contacts E CIRCUIT DIAGRAMS 1AK Dielectric Strength Between Open Contacts & Coil - 1C Coil Voltage (Refer coil data) 5 Contact Resistance(Initial) 12 Product Series 6 Mechanical - : 5000 VRMS 2C/1CK : 750 VRMS : 500 Meg.Ohms at 5 AC 2C DC 1 0.5 0.1 0 500VDC,25 C,RH50 1C 10 10 20 30 40 50 100 200 Contact Voltage(V) Operate time at Nominal Voltage : 18 milli sec.(Typ) Release time at Nominal Voltage : 8 milli sec.(Typ) Ambient Temperature : –40 C to +70 C Weight : 18 gms (approx) 12.5 24.5 For Suitable Sockets Refer Socket Section Typical applications Industrial Electronics, PLCs, Timers, Automation, UPS, Home Appliances. 29.0 0 Office All dimensions are in mm. Specifications subject to change without notice. Tolerance unless otherwise specified is ± 10% 3.5 0 DIMENSIONS 7.5 300 400 500