OMRON XR2Z-11

IC Sockets
XR2
OMRON’s IC Connectors Have Excellent
Reliability and Can Tolerate Momentary
Interruptions in Power.
• Round pins and 4-point (4-finger) contact construction with
contact entry holes that are large for easy insertion.
• IC lead contacts placed high for solid connections.
• A wide product range: open-frame, closed-frame, singlerow, carrier-type DIP terminals, wrap terminals, soldersleeve terminals, and low-profile DIP terminals.
• Conforms to UL standards (file no. E 103202) and CSA
standards (file no. LR 62678).
■ Construction
■ Contact Dimensions
Inner clip
Base
DIP
Terminals
1.83 dia.
Wrap
Terminals
Low-profile DIP
Terminals
1.83 dia.
Solder-sleeve
Terminals
1.83 dia.
1.83 dia.
Outer sleeve
Carrier
1.35 dia.
0.79 dia.
Inner clip
0.51 dia.
0.635 0.635
Outer sleeve
■ Ratings and Characteristics
■ Applicable Wrap Post Wire Sizes
Item
Rated current
Rated voltage
Contact resistance
Insulation resistance
Dielectric strength
Contact insertion
(See note.)
Contact removal
(See note.)
Insertion durability
AWG30, AWG28, AWG26, AWG24
(Solid wire: 0.25 to 0.51 mm dia.)
Gold plated
Gold flash plated
1A
300 VAC
20 mΩ max. (at 20 mV, 100 mA max.)
1,000 MΩ min. (at 500 VDC)
1,000 VAC for 1 min (leakage current: 1 mA max.)
400 gf (3.92 N) max.
3 wires
■ Applicable IC Lead Dimensions
65 gf (0.64 N) min. with gold plating or with solder plating
DIP, Wrap, and Solder-sleeve Terminals
100 times (0.75-μm gold plating), 20 times
50 times (0.25-μm gold plating)
Ambient temperature Operating: –55 to 125°C (with no icing)
Note: The contact insertion force and contact removal force are for a
test gauge, t = 0.432 mm.
■ Materials and Finish
Base
Carrier
Inner clip
Outer sleeve
■ Wrap Post Length
Fiber-glass reinforced PBT resin (UL94V-0)/black
Aluminum
Beryllium copper/nickel base, gold plated
Brass/nickel base, gold flash plating
Depth × width (mm)
Flat lead
0.29 ±0.09 × 0.46 ±0.08 (See note.)
Round lead
0.53 dia. max.
0.41 dia. min.
Note: Do not use wire where the diagonal is more than 0.56 mm.
Low-profile DIP Terminals
Depth × width (mm)
Flat lead
0.29 ±0.09 × 0.46 ±0.08 (See note.)
Round lead
0.50 dia. max.
0.41 dia. min.
Note: Do not use wire where the diagonal is more than 0.52 mm.
Note: For non-standard plating, contact your OMRON representative.
IC Sockets
XR2
111
XR2A Open-frame Sockets
■ Dimensions
[email protected]@11-N
XR2A-2463-N
XR2A-2473-N
[email protected]@01-N
XR2A-2461-N
XR2A-2471-N
[email protected]@21-N
XR2A-2467-N
XR2A-2477-N
(With DIP terminals)
Dimensions
No. of contacts Dimensions (mm)
A
0.51 dia.
1.33 dia.
DIP terminals
[email protected]@02
(With wrap
terminals)
0.635 × 0.635
Wrap terminals
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
1.0 ±0.05 dia. (Wrap terminals)
B
8
7.62
7.62
14
7.62
15.24
16
7.62
17.78
18
7.62
20.32
20
7.62
22.86
22
10.16
25.40
24
(See note 1.)
15.24
27.94
24
(See note 2.)
10.16
27.94
24
(See note 3.)
7.62
27.94
28
15.24
33.02
32
15.24
38.10
40
15.24
48.26
42
15.24
50.80
48
15.24
58.42
50
22.86
60.96
64
22.86
78.74
Note: 1. XR2A-2401-N/XR2A-2402/
XR2A-2411N/XR2A-2421-N
2. XR2A-2461-N/XR2A-2463-N/
XR2A-2467-N
3. XR2A-2471-N/XR2A-2473-N/
XR2A-2477-N
■ Ordering Information
Appearance
No of
contacts
Row pitch (A)
(mm)
Sockets with DIP terminals
With 0.25-μm gold
plating
Sockets with wrap
terminals
With 0.75-μm gold
plating
With gold flash plating
With 0.75-μm gold
plating
8
7.62
XR2A-0811-N
XR2A-0801-N
XR2A-0821-N
XR2A-0802
14
7.62
XR2A-1411-N
XR2A-1401-N
XR2A-1421-N
XR2A-1402
16
7.62
XR2A-1611-N
XR2A-1601-N
XR2A-1621-N
XR2A-1602
18
7.62
XR2A-1811-N
XR2A-1801-N
XR2A-1821-N
XR2A-1802
20
7.62
XR2A-2011-N
XR2A-2001-N
XR2A-2021-N
XR2A-2002
22
10.16
XR2A-2211-N
XR2A-2201-N
XR2A-2221-N
XR2A-2202
24
15.24
XR2A-2411-N
XR2A-2401-N
XR2A-2421-N
XR2A-2402
24
10.16
XR2A-2463-N
XR2A-2461-N
XR2A-2467-N
—
24
7.62
XR2A-2473-N
XR2A-2471-N
XR2A-2477-N
XR2A-2472
28
15.24
XR2A-2811-N
XR2A-2801-N
XR2A-2821-N
XR2A-2802
32
15.24
XR2A-3211-N
XR2A-3201-N
XR2A-3221-N
XR2A-3202
40
15.24
XR2A-4011-N
XR2A-4001-N
XR2A-4021-N
XR2A-4002
42
15.24
XR2A-4211-N
XR2A-4201-N
XR2A-4221-N
XR2A-4202
48
15.24
XR2A-4811-N
XR2A-4801-N
—
XR2A-4802
50
22.86
XR2A-5011-N
XR2A-5001-N
—
—
64
22.86
XR2A-6411-N
XR2A-6401-N
—
XR2A-6402
112
IC Sockets
XR2
XR2A Open-frame Sockets (with Low-profile DIP Terminals)
■ Dimensions
Dimensions
[email protected]@15
XR2A-2466
XR2A-2476
[email protected]@05
XR2A-2465
XR2A-2475
[email protected]@25
XR2A-2468
XR2A-2478
(With low-profile DIP terminals)
No. of contacts Dimensions (mm)
A
0.79 dia.
Mounting holes (bottom view)
0.9 ±0.05 dia.
B
8
7.62
7.62
14
7.62
15.24
16
7.62
17.78
18
7.62
20.32
20
7.62
22.86
22
10.16
25.40
24
(See note 1.)
15.24
27.94
24
(See note 2.)
10.16
27.94
24
(See note 3.)
7.62
27.94
28
15.24
33.02
32
15.24
38.10
40
15.24
48.26
42
15.24
50.80
48
15.24
58.42
64
22.86
78.74
Note: 1. XR2A-2415/XR2A-2405/
XR2A-2425
2. XR2A-2466/XR2A-2465/
XR2A-2468
3. XR2A-2476/XR2A-2475/
XR2A-2478
■ Ordering Information
Appearance
No. of
contacts
Row pitch (A)
(mm)
Sockets with DIP terminals
With 0.25-μm gold
plating
With 0.75-μm gold
plating
With gold flash plating
8
7.62
XR2A-0815
XR2A-0805
XR2A-0825
14
7.62
XR2A-1415
XR2A-1405
XR2A-1425
16
7.62
XR2A-1615
XR2A-1605
XR2A-1625
18
7.62
XR2A-1815
XR2A-1805
XR2A-1825
20
7.62
XR2A-2015
XR2A-2005
XR2A-2025
22
10.16
XR2A-2215
XR2A-2205
XR2A-2225
24
15.24
XR2A-2415
XR2A-2405
XR2A-2425
24
10.16
XR2A-2466
XR2A-2465
XR2A-2468
24
7.62
XR2A-2476
XR2A-2475
XR2A-2478
28
15.24
XR2A-2815
XR2A-2805
XR2A-2825
32
15.24
XR2A-3215
XR2A-3205
XR2A-3225
40
15.24
XR2A-4015
XR2A-4005
XR2A-4025
42
15.24
XR2A-4215
XR2A-4205
—
48
15.24
XR2A-4815
XR2A-4805
—
64
22.86
XR2A-6415
XR2A-6405
—
IC Sockets
XR2
113
XR2B Closed-frame Sockets
■ Dimensions
XR2B-1611-N
XR2B-1601-N
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
0.51 dia.
1.33 dia.
[email protected]@11-N
[email protected]@01-N
Dimensions
No. of
contacts
0.51 dia.
1.33 dia.
■ Ordering Information
Appearance
No. of
contacts
Row pitch (A)
(mm)
Sockets with DIP terminals
With 0.25-μm gold
plating
With 0.75-μm gold
plating
16
7.62
XR2B-1611-N
XR2B-1601-N
24
15.24
XR2B-2411-N
XR2B-2401-N
28
15.24
XR2B-2811-N
XR2B-2801-N
32
15.24
XR2B-3211-N
XR2B-3201-N
40
15.24
XR2B-4011-N
XR2B-4001-N
114
IC Sockets
XR2
Dimensions (mm)
A
B
16
7.62
17.78
24
15.24
27.94
28
15.24
33.02
32
15.24
38.10
40
15.24
48.26
XR2T Open-frame Sockets with Seal Tape
• Equipped with seal tape to prevent flux cleaning liquids from entering the Socket.
• The same round-pin, 4-point contact structure as the RX2A is used for the contacts.
• The seal tape is made of transparent polyethyle (adhesive portion) and yellow polypropolyene (non-adhesive portion).
■ Dimensions
Dimensions
[email protected]@11-N
XR2T-2463-N
XR2T-2473-N
[email protected]@01-N
XR2T-2461-N
XR2T-2471-N
[email protected]@21-N
XR2T-2467-N
XR2T-2477-N
No. of contacts Dimensions (mm)
Adhesive side
A
Non-adhesive side
Seal tape
0.51 dia.
1.33 dia.
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
B
8
7.62
7.62
14
7.62
15.24
16
7.62
17.78
18
7.62
20.32
20
7.62
22.86
22
10.16
25.40
24
(See note 1.)
15.24
27.94
24
(See note 2.)
10.16
27.94
24
(See note 3.)
7.62
27.94
28
15.24
33.02
32
15.24
38.10
40
15.24
48.26
48
15.24
58.42
Note: 1. XR2T-2411-N/XR2T-2401-N/
XR2A-2421-N
2. XR2T-2463-N/XR2T-2461-N/
XR2T-2467-N
3. XR2T-2473-N/XR2T-2471-N/
XR2T-2477-N
■ Ordering Information
Appearance
No. of
contacts
Row pitch (A)
(mm)
Sockets with DIP terminals
With 0.25-μm gold
plating
With 0.75-μm gold
plating
With gold flash plating
8
7.62
XR2T-0811-N
XR2T-0801-N
XR2T-0821-N
14
7.62
XR2T-1411-N
XR2T-1401-N
XR2T-1421-N
16
7.62
XR2T-1611-N
XR2T-1601-N
XR2T-1621-N
18
7.62
XR2T-1811-N
XR2T-1801-N
XR2T-1821-N
20
7.62
XR2T-2011-N
XR2T-2001-N
XR2T-2021-N
22
10.16
XR2T-2211-N
XR2T-2201-N
XR2T-2221-N
24
15.24
XR2T-2411-N
XR2T-2401-N
XR2T-2421-N
24
10.16
XR2T-2463-N
XR2T-2461-N
XR2T-2467-N
24
7.62
XR2T-2473-N
XR2T-2471-N
XR2T-2477-N
28
15.24
XR2T-2811-N
XR2T-2801-N
XR2T-2821-N
32
15.24
XR2T-3211-N
XR2T-3201-N
XR2T-3221-N
40
15.24
XR2T-4011-N
XR2T-4001-N
XR2T-4021-N
48
15.24
XR2T-4811-N
XR2T-4801-N
---
IC Sockets
XR2
115
XR2C Single-row Sockets
■ Dimensions
[email protected]@11-N
[email protected]@01-N
[email protected]@21-N
(With DIP terminals)
0.51 dia.
1.33 dia.
Mounting holes (bottom view)
[email protected]@15
[email protected]@05
[email protected]@25
(With low-profile DIP terminals)
0.8 ±0.05 dia. (DIP terminals)
1.0 ±0.05 dia. (Wrap terminals
0.9 ±0.05 dia. (Low-profile DIP
Dimensions
0.79 dia.
No. of
contacts
[email protected]@02
(With wrap terminals)
A (mm)
20
48.26
32
78.74
0.64 × 0.64
■ Ordering Information
Appearance
No. of
contacts
Sockets with DIP terminals
With 0.25-μm gold plating
With 0.75-μm gold plating
With gold flash plating
10
XR2C-1011-N
—
—
16
XR2C-1611-N
—
—
20
XR2C-2011-N
XR2C-2001-N
XR2C-2021-N
32
XR2C-3211-N
XR2C-3201-N
XR2C-3221-N
Sockets with low-profile DIP terminals 20
XR2C-2015
XR2C-2005
XR2C-2025
32
XR2C-3215
XR2C-3205
XR2C-3225
20
—
XR2C-2002
—
32
—
XR2C-3202
—
Sockets with wrap terminals
116
IC Sockets
XR2
XR2D Double-row Carrier Sockets
■ Dimensions
[email protected]@01-N
(With DIP terminals)
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
1.5 ±0.05 dia. (Solder-sleeve terminals)
1.5 dia.
[email protected]@04
(With solder-sleeve terminals)
Dimensions
No. of contacts Dimensions (mm)
A
1.36 dia.
1.83 dia.
0.51 dia.
1.83 dia.
DIP terminals
Solder-sleeve terminals
B
8
7.62
7.62
14
7.62
15.24
16
7.62
17.78
18
7.62
20.32
20
7.62
22.86
24
15.24
27.94
28
15.24
33.02
32
15.24
38.10
40
15.24
48.26
■ Ordering Information
Appearance
No. of
contacts
Row pitch (A)
(mm)
Sockets with DIP
terminals
With 0.75-μm gold
plating
Sockets with soldersleeve terminals
With 0.75-μm gold
plating
8
7.62
XR2D-0801-N
XR2D-0804
14
7.62
XR2D-1401-N
XR2D-1404
16
7.62
XR2D-1601-N
XR2D-1604
18
7.62
XR2D-1801-N
XR2D-1804
20
7.62
XR2D-2001-N
XR2D-2004
24
15.24
XR2D-2401-N
XR2D-2404
28
15.24
XR2D-2801-N
XR2D-2804
32
15.24
XR2D-3201-N
XR2D-3204
40
15.24
XR2D-4001-N
XR2D-4004
IC Sockets
XR2
117
XR2E Single-row Carrier Sockets
■ Dimensions
XR2E-3201-N
(With DIP terminals)
2 dia.
0.51 dia.
1.8 dia.
1.36 dia.
1.83 dia.
(DIP terminals)
XR2E-3204
(With solder-sleeve terminals)
(Solder-sleeve terminals)
Mounting holes (bottom view)
0.8 ±0.05 dia. (DIP terminals)
1.5 ±0.05 dia. (Solder-sleeve terminals)
■ Ordering Information
Appearance
No. of
contacts
32
118
Sockets with DIP
Terminals
With 0.75-μm gold
plating
XR2E-3201-N
IC Sockets
XR2
Sockets with Soldersleeve Terminals
With 0.75-μm gold
plating
XR2E-3204
XR2H ZIP (Zigzag) Sockets
■ Dimensions
[email protected]@11-N
(With DIP terminals)
Dimensions
No. of
contacts
Dimensions (mm)
A
B
16
17.78
21.5
20
22.86
26.5
24
27.94
31.6
28
33.02
36.7
Mounting holes (bottom view)
0.8 ±0.05 dia.
■ Ordering Information
Appearance Sockets with DIP
terminals
No. of
contacts
With 0.25-μm gold
plating
16
XR2H-1611-N
20
XR2H-2011-N
24
XR2H-2411-N
28
XR2H-2811-N
IC Sockets
XR2
119
XR2P Single-row Round Pin Plugs
Single-row Round Pins for Low-profile Stacking
• Single row with 2.54-mm pitch.
• Low-profile stacking possible in combination with Single-row IC Sockets (XR2C).
• Easily divided into the desired number of contacts.
■ Ratings and Characteristics
■ Materials and Finish
Rated current
1A
Base
Rated voltage
300 VAC
Contact resistance
(See note.)
20 mΩ max. (at 20 mV, 10 mA max.)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
1,000 VAC for 1 min (leakage current:
1 mA max.)
■ Applicable Sockets
Ambient operating
temperature
–55 to 125°C (with no icing at low temperature)
[email protected]@11-N
IC Sockets (single row)
XR2C-3215
IC Socket (single row, low profile)
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Contacts
Mating end
Terminal
Brass/nickel base with 0.25-μm gold plating
Note: The contact and vibration resistance are the values when the
Plug is mated with an XR2C.
■ Dimensions
[email protected]@41
(With DIP straight terminals)
Mounting holes (bottom view)
Thirty-two, 0.8 ±0.05 dia.
1.8 dia.
0.45 dia.
Dimensions
0.45 dia.
Terminals (board side)
■ Ordering Information
No. of
contacts
Model
10
XR2P-1041
16
XR2P-1641
20
XR2P-2041
32
XR2P-3241
No. of
contacts
A (mm)
10
22.86
16
38.1
20
48.26
32
78.74
■ Mated Dimensions
[email protected]@41 with [email protected]@11-N
Single-row IC Socket
[email protected]@41
XR2P-3241
XR2C-3215
[email protected]@11-N
120
XR2P-3241 with XR2C-3215
Single-row Low-profile IC Socket
IC Sockets
XR2
XR2P-3241 with XR2E-3204
Single-row Carrier Socket with
Solder-sleeve Terminals
XR2P-3241
XR2E-3204
■ Tools and Accessories
XR2Z-13
XR2Z-11
IC Holder (made from PBT)
Note: Order the following models in multiples of the minimum order.
Model
No. of IC Socket contacts IC socket width
Order in multiples of
XR2Z-11
14, 16, 18, 20, 24
7.62 m
100
XR2Z-13
24, 28, 32, 40, 42, 48
15.24 mm
500
Note: This Holder protects the IC
from falling out due to shock.
The IC will not fall out even
with a 980 m/s2 shock. Applicable IC height: 2.7 to 5.6 mm.
XY2C-0101
XY2C-0103
IC Removal Tool
Model
No. of IC Socket contacts
IC socket width
XY2C-0101 14, 16, 18, 20
7.62 m
XY2C-0103 24, 28, 32, 40
15.24 mm
■ Precautions
Correct Use
Soldering
• When soldering, make sure that the outer
sleeve of the IC Socket does not stick out
of the circuit board through-holes.
• Make sure that no flux enters the IC
Socket from the top.
Removing ICs
• Use the XY2C-0101 or XY2C-0103 IC
Removal Tool to remove ICs.
• Do not use a screwdriver to remove the
IC. It may damage the circuit board.
• Do not use a testing rod or check pin to
check contacts or circuits. This may damage the inner clips or plating and may
lead to improper contact.
• Four-point contact construction is used for
plated products to make them more tolerant of momentary power interruptions.
We recommend using gold-plated contacts in areas subject to vibration and
shock.
Automated Soldering
Conditions (Jet Flow)
Applicable IC Lead
Dimensions
1. Use leads that are within the range
shown here. For details, refer to the first
page of this datasheet. Use an IC with
leads longer than 3 mm. If the leads are
too long, the IC will not sit flush on the
board.
2. Use an IC with tapered leads for easy
insertion, a minimum amount of bending, and minimum damage to the leads.
NG
OK
OK
1. Soldering temperature: 250±5°C
2. Continuous soldering time: Within 5 s
IC Sockets
XR2
121
MEMO
122
IC Sockets
XR2
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
IC Sockets
XR2
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
01/10
Cat. No. X304-E-1
IC Sockets
XR2
Specifications subject to change without notice
Printed in USA