Marketing Bulletin DATE: September 20th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective September 20th, 2006: Series EC14 Description 5V 4 pad SMD Plastic Oscillator Recommended Replacement EP14 or EH14 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31st, 2007, with delivery to conclude by September 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EC14 Series EC14 • Plastic surface mount package • 5.0V supply voltage • HCMOS/TTL output • Stability to ±50ppm • Available on tape and reel H 4.7 L 14.0 W 9.8 OSCILLATOR OBSOLETE ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.000MHz to 66.667MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C (<30.000MHz) Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) Frequency Tolerance / Stability* Input Current Load Drive Capability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Duty Cycle Rise Time / Fall Time 5.0VDC ±10% Inclusive of Operating Temperature Range, ±100ppm Maximum or Supply Voltage, and Load ±50ppm Maximum (0°C to 70°C Only) <30.000MHz 23mA Maximum (Unloaded) 30.001MHz to 50.000MHz 35mA Maximum (Unloaded) >50.000MHz 50mA Maximum (Unloaded) <53.125MHz 10TTL Load or 50pF HCMOS Load >53.125MHz 15pF HCMOS Load w/TTL Load 2.4VDC Minimum IOH = -16mA w/HCMOS Load VDD-0.5VDC Minimum IOH = -16mA w/TTL Load 0.4VDC Maximum IOL = +16mA w/HCMOS Load 0.5VDC Maximum IOL = +16mA at 50% of waveform w/HCMOS Load at 1.4VDC w/TTL Load 50 ±10(%) (Standard) at 1.4VDC w/HCMOS Load or w/TTL Load 50 ±5(%) (Optional) 20% to 80% of waveform w/HCMOS Load; 8 nSeconds Maximum 0.4VDC to 2.4VDC w/TTL Load Aging (at 25°C) ±5ppm / year Maximum Tri-State Input Voltage Start Up Time No Connection Enables Output VIH :≥2.0VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance 1.000MHz to 26.000MHz 4 mSeconds Maximum 26.001MHz to 66.667MHz 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC14 PLASTIC 5.0V OS33 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC14 00 SJ ET T TS - 25.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel (Standard) OPERATING TEMP. RANGE Blank=0°C to 70°C ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) OBSOLETE MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Tolerances = ±0.1 Pin 3: Output Pin 4: Supply Voltage ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 24 ±.3 11.5 ±.1 10.75 ±.1 4 ±.2 2±.1 F G H J 12 ±.2 B0* 1.5 +.1-0 A0* K .3 ±.1 L K0* M N 1.5 MIN 50 MIN REEL *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS R S T 2.5 MIN 10 MIN 30.4 MAX O 20.2 MIN U 360 MAX P Q 13±.2 40 MIN V 24.4+2-0 QTY/REEL 1,000 MARKING SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum (internal crystal only). Line 2: XX.XXX M Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Vibration Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC14 PLASTIC 5.0V OS33 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.