EH25 Series EH25 • Pb-free ceramic SMD package • 5.0V supply voltage • HCMOS/TTL output • Stability to 20ppm • Available on tape and reel H 1.6 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 155.520MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current 50mA Maximum (Unloaded) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration 2.4VDC Minimum IOH =-16mA VDD-0.4VDC Minimum IOH =-16mA w/TTL Load 0.4VDC Maximum IOL =+16mA w/HCMOS Load 0.5VDC Maximum IOL =+16mA at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS 50 ±10(%) (Standard) Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) Duty Cycle (VDD=5.0VDC) Load (≤70.000MHz) 50 ±10(%) (Standard) at 50% of waveform w/ TTL Load or w/HCMOS Load (>70.000MHz) Rise Time / Fall Time at 50% of waveform w/TTL Load or w/HCMOS Load 50 ±5(%) (Optional) 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% 6 nSeconds Maximum of Waveform w/HCMOS Load (≤70.000MHz) 4 nSeconds Maximum 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (>70.000MHz) Tri-State Input Voltage VIH :No Connection Enables Output VIH :≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Load Drive Capability ≤70.000MHz 10TTL Load or 50pF HCMOS Load Maximum >70.000MHz 5TTL Load or 15pF HCMOS Load Maximum Period Jitter: Absolute ±250pSec Maximum, ±100pSec Typical Period Jitter: One Sigma ±50pSec Maximum, ±30pSec Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EH25 CERAMIC 5.0V OS48 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 02/04 Specifications subject to change without notice. PART NUMBERING GUIDE EH25 00 ET T TS - 24.000M TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard), 45=±50ppm Maximum, 25=±25ppm Maximum, 20=±20ppm Maximum AVAILABLE OPTIONS Blank=Bulk (Standard) TR=Tape and Reel OPERATING TEMP. RANGE Blank =0ºC to 70ºC, ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances = ±0.1 ALL DIMENSIONS IN MILLIMETERS A B C D E 16+.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 REEL F G H J K L 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0* F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 2: XX.XXX M MANUFACTURER ECLIPTEK CORP. CATEGORY SERIES PACKAGE OSCILLATOR EH25 CERAMIC 800-ECLIPTEK www.ecliptek.com for latest revision Frequency in MHz (5 Digits Maximum + Decimal) Line 3: P XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator VOLTAGE 5.0V CLASS OS48 REV.DATE 02/04 Specifications subject to change without notice.