ECLIPTEK EP16E7

EP16E7 Series
• RoHS Compliant (Pb-Free)
• EPO™ Programmable Oscillators
• Ceramic Surface Mount Package
• LVHCMOS Output
• 1.8V Supply Voltage
• Stability to ±25ppm
• Available on Tape & Reel
• Tri-State and Power Down Funtions Available
EP16E7
H
L
W
1.05
3.2
2.5
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Pad 1 Connection
Pad 1 Input Voltage
Standby Current
Disable Current
Absolute Clock Jitter
Aging at 25°
Start Up Time
3.300MHz, 3.6864MHz, 5.000MHz, 6.000MHz, 7.000MHz, 8.000MHz, 9.000MHz, 10.000MHz,
12.000MHz, 16.000MHz , 24.000MHz, 25.000MHz, 26.000MHz, 32.000MHz, 33.000MHz, 33.333MHz,
37.500MHz, 52.000MHz, 64.000MHz, 66.000MHz, 67.000MHz, 70.000MHz, and 75.000MHz
-20°C to 70°C or -40°C to 85°C
-55°C to 125°C
1.8VDC ±5%
8mA Maximum
3.300MHz to 25.000MHz
9mA Maximum
25.001MHz to 50.000MHz
12mA Maximum
50.001MHz to 75.000MHz
Inclusive of All Conditions: Calibration Tolerance at 25°C , ±25ppm, 50ppm or ±100ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year
Aging at 25°C, 260°C Reflow, Shock, and Vibration
90% of VDD Minimum
IOH = -8mA
IOL = +8mA
10% of VDD Maximum
3.300MHz to 50.000MHz, 20% to 80% of waveform
6nSeconds Maximum
50.001MHz to 75.000MHz, 20% to 80% of waveform
4nSeconds Maximum
at 50% of waveform
50 ±5(%)
15pF HCMOS Load Maximum
Tri-State or Power Down
Enables Output
VIH of 90% of VDD Minimum
No Connection
Enables Output
VIL of 10% of VDD Maximum
Disables Output
Disabled Output (Logic Low)
30μA Maximum
Disabled Output (High Impedance)
4mA Maximum
3.300MHz to 24.999999MHz
350pSec Maximum
25.000MHz to 75.000MHz
200pSec Maximum
±5ppm/Year Maximum
10mSec Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EP16E7
CERAMIC
1.8V
OS5N
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
10/07
Specifications subject to change without notice.
PART NUMBERING GUIDE
EP16E7 H 2 H - 32.000M TR
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over -20°C to +70°C
D=±50ppm Maximum over -20°C to +70°C
E=±25ppm Maximum over -20°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
AVAILABLE OPTIONS
Blank=Bulk
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
H=Tri-State
J=Power Down
DUTY CYCLE
2=50% ±5%
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
1.05
±0.15
0.75 ±0.10 (X4)
MARKING
ORIENTATION
2.50
±0.15
3.20
±0.15
3
2
1.20
±0.10
1.00
±0.10
1
4
1.00
±0.10
Pin 1: Tri-State or Power Down Pin 3: Output
Pin 4: Supply Voltage
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Tolerances= +0.1
ALL DIMENSIONS IN MILLIMETERS
PLASTIC
A
B
12.0 ±0.3
C
D
5.5 ±0.05 4.75 ±0.1
E
F
M
N
1.5 MIN
50 MIN
REEL
4.0 ±0.1 2.00 ±0.05
O
P
20.2 MIN 13+.5/-.2
F
G
H
J
K
L
R
S
T
U
V
4.0 ±0.1
A0*
1.5 +.1/-0
B0*
0.6 MAX
K0*
2.5 MIN
10 MIN
18.4 MAX
332 MAX
12.4 +2/-0
Q
40 MIN
QTY/REEL
1,000
*Compliant to EIA 481C
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
ESD Susceptibility
Fine Leak Test
Gross Leak Test
Mechanical Shock
Moisture Resistance
Moisture Sensitivity
Resistance to Soldering Heat
Resistance to Solvents
Solderability
Temperature Cycling
Thermal Shock
Vibration
MIL-STD-883, Method 3015, Class 1, HBM: 1500Vdc
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 1011, Condition B
MIL-STD-883, Method 2007, Condition A
MEMS First™ is a registered trademark of SiTime Corporation.
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EP16E7
CERAMIC
1.8V
OS5N
10/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Ecliptek MEMS Oscillators
- Lower Cost, Quicker Delivery Alternative!
The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant
cost advantages by utilizing a revolutionary new MEMS resonator technology. This important
innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples
and 5 to 10 days for quantities up to 10,000 pieces on tape and reel.
Package Dimensions
(all dimensions in millimeters)
Supply
Voltage
(VDC)
5x7
3.2 x 5
2.5 x 3.2
2 x 2.5
1.8
EMK11
EMK21
EMK31
EMK41
2.5
EMK12
EMK22
EMK32
EMK42
3.3
EMK13
EMK23
EMK33
EMK43
Would you like to request EMO™ samples or a quotation now?
Click Here
Want to learn more about the Ecliptek EMO™ family of MEMS oscillators?
Click Here
Product Features:
•
•
•
•
•
•
•
•
•
Improved frequency stability through the use of a MEMS resonator
1.8VDC, 2.5VDC, or 3.3VDC supply voltages
Frequency range of 1MHz to 125MHz, HCMOS output
Frequency stability to ±50ppm, -40°C to +85°C operation
Tri-state or power down functions
RoHS compliant
High temperature +260°C reflow capability
EIA compliant tape and reel packaging
Four SMD package sizes
If you have any questions or would like additional information regarding the
Ecliptek EMO™ family of oscillators, please contact our Sales Department.