C&K JA Series Rocker Switches Features/Benefits • Right angle PCB mounting • Cost-effective solution • RoHS compliant Typical Applications • Modems • Entertainment devices • Computer printers Models Available Specifications Materials CONTACT RATING: Q contact material: 2 AMPS @ 125 V AC; 1 AMP @ 250 V AC (UL/CSA). See page H-116 for additional ratings. HOUSING & ACTUATOR SUPPORT: 6/6 nylon (UL 94V-2), black. ACTUATOR: 6/6 nylon (UL 94V-2), black. PLUNGER: Glass filled polyester (UL 94V-0). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page H-118 for additional contact materials. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. SWITCH SUPPORT TERMINALS: Brass, tin plated (not electrically connected). DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT SPRING: Music wire or stainless steel. OPERATING TEMPERATURE: –30ºC to 85ºC TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for standard switches. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages H–114 and H–116. For additional options not shown in catalog, consult Customer Service Center. Switch Function JA01 SPDT, On-None-On Actuator J1 Rocker Actuator Color 2 Black 3 Red Terminations A Right angle, PC thru-hole Contact Material Q Silver Rocker Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H-114 www.ittcannon.com H C&K JA Series Rocker Switches SWITCH FUNCTION POS. 1 NO. POLES SWITCH FUNCTION POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 MODEL NO. SCHEMATIC 2 SP JA01 ON NONE ON 2-3 N/A 2-1 1 SPDT 3 SPDT Terminal Nos. For Reference Only Part number shown: JA01J12AQ MOM. = MOMENTARY Contact makes on opposite side actuator thrown. ACTUATOR COLOR ACTUATOR J1 ACTUATOR ROCKER OPTION CODE ACTUATOR COLOR 2 BLACK 3 WHITE NOTE: Other colors available, consult Customer Service Center. TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE Rocker PC MOUNTING Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H-115 www.ittcannon.com C&K JA Series Rocker Switches CONTACT MATERIAL OPTION CODE RoHS COMPLIANT * RoHS COMPATIBLE * Q YES YES CONTACT AND TERMINAL MATERIAL RATINGS SILVER 1 2 AMPS @ 125 V AC; 1 AMP @ 250 V AC (UL/CSA). POWER * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. 1 CONTACTS & TERMINALS: Copper, silver plated. All models with all options when ordered with ‘Q’ contact material. SEAL NONE NO SEAL E EPOXY SEAL Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H-116 www.ittcannon.com H