ALUMINUM ELECTROLYTIC CAPACITORS BX High Temperature Range, For +150°C Use series Laminated case series. Suited for automobile electronics where heavy duty services are indispensable. Adapted to the RoHS directive (2002/95/EC). BX High Temperature BW Performance Characteristics Item Category Temperature Range – 55 ~ +150°C (10 ~ 100V), – 40 ~ +150°C (160 · 200V), – 25 ~ +150°C (350 · 400V), Rated Voltage Range 10 ~ 400V Rated Capacitance Range 1 ~ 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage (V) Leakage Current 160 ~ 400 10 ~ 100 After 1 minute's application of rated voltage, leakage current Leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 10 16 25 35 50 63 80 100 tan δ (MAX.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. tan δ Rated voltage (V) Z– 25°C / Z+20°C Z– 40°C / Z+20°C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 10 3 4 16 2 4 25 2 4 35 2 4 50 2 4 63 2 4 < 1000 : I = 0.1CV+40 (µA) max. (1 minute's) CV = CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's) 160 · 200 350 · 400 0.20 80 100 160 · 200 350 · 400 2 2 3 6 4 4 6 - Endurance After an application of D.C. bias voltage plus the rated ripple Capacitance change current for 2000 hours (1000 hours for φD =10 and 12.5) at 150°C the peak voltage shall not exceed the rated D.C. voltage, Dissipation Factor capacitors meet the characteristics requirements listed at right. Leakage current Marking Black print on the case top. 120Hz 20°C 0.24 120Hz Within ±30% of initial value (10 ~ 100V) Within ±20% of initial value (160 ~ 400V) 300% or less of initial specified value (10 ~ 100V) 200% or less of initial specified value(160 ~ 400V) Initial specified value or less Type numbering system (Example : 10V 3300µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 Series Lot No. UB X 1 A 3 3 2 MH L P ± 0.5 D+0.5 MAX. fd f nichicon 3300 BX 10V H9806 Rated Capacitance Rated Voltage Trade mark Laminated case Pressure relief vent L+1.5MAX. 15MIN 4MIN D Code 10 PL 12.5 ~ 18 HL Configuration Capacitance tolerance (±20%) Rated Capacitance (3300µF) Rated voltage (10V) Series name Type f (mm) D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 fd 0.6 0.6 0.8 0.8 f • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS BX series Dimensions Cap.. (µF) V (Code) 10 16 25 35 Code 1A 1C 1E 1V 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 1000 102 2200 222 3300 332 4700 472 10 × 12.5 35 10 × 12.5 50 10 × 12.5 60 10 × 12.5 175 10 × 12.5 85 10 × 12.5 200 10 × 12.5 10 × 12.5 10 × 16 10 × 16 10 × 20 300 10 × 20 12.5 × 25 18 × 35.5 1000 250 10 × 20 400 12.5 × 25 600 16 × 25 800 16 × 31.5 1000 18 × 40 1300 1200 18 × 40 1200 18 × 40 800 16 × 31.5 800 18 × 35.5 1000 600 16 × 25 600 16 × 25 600 16 × 31.5 500 12.5 × 25 400 12.5 × 20 400 250 12.5 × 20 300 225 10 × 12.5 1300 Cace Size φ D × L (mm) 1300 Rated Ripple Rated Ripple (mA rms) at 150°C 100kHz Cap.. (µF) V (Code) 50 63 80 Code 1H 1J 1K 22 220 33 330 47 470 56 560 68 680 100 101 220 221 330 331 470 471 560 561 680 681 1000 102 10 × 16 10 × 12.5 10 × 20 12.5 × 20 12.5 × 31.5 16 × 31.5 1480 18 × 31.5 1520 Frequency 10 ~ 100 Cap.. (µF) 300Hz 1kHz 10kHz ~ 0.50 0.64 0.83 1.00 1000 0.67 0.79 0.91 1.00 V (Code) 160 200 350 2C 2D 2V 4R7 6.8 6R8 10 100 15 150 22 220 33 330 47 470 56 560 68 680 100 101 10 × 12.5 10 × 12.5 10 × 16 10 × 16 110 10 × 20 12.5 × 20 12.5 × 25 250 12.5 × 25 16 × 20 270 16 × 20 16 × 25 290 16 × 25 10 × 20 83 10 × 12.5 110 230 12.5 × 20 10 × 16 10 × 12.5 160 12.5 × 20 760 12.5 × 25 950 16 × 31.5 1380 18 × 31.5 1430 Cace Size Code 4.7 640 12.5 × 20 Rated Ripple Rated Ripple (mArms) at 150°C 100kHz 120Hz CV 640 10 × 20 φ D × L (mm) 1420 1000 > CV CV 510 10 × 20 1530 Frequency coefficient of rated ripple current V 390 10 × 16 1520 16 × 35.5 1190 1250 16 × 31.5 1280 16 × 31.5 1080 16 × 25 820 16 × 25 1170 16 × 25 960 690 12.5 × 20 1040 12.5 × 31.5 770 12.5 × 25 690 10 × 20 710 12.5 × 25 640 550 10 × 20 560 10 × 20 380 420 10 × 16 430 2A 10 × 12.5 10 × 12.5 10 × 12.5 100 12.5 × 20 83 12.5 × 25 130 400 2G 77 110 120 130 10 × 20 83 12.5 × 25 105 12.5 × 20 88 12.5 × 25 105 170 210 250 270 290 Cace Size φ D × L (mm) 300 Rated Ripple Rated Ripple (mArms) at 150°C 120Hz Frequency coefficient of rated ripple current V 160 ~ 400 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz 4.7 ~ 330 0.75 1.00 1.25 1.50 1.75 1.80 .47 ~ 100 0.80 1.00 1.15 1.30 1.40 1.50 Cap. (µF) CAT.8100V