ALUMINUM ELECTROLYTIC CAPACITORS BC Chip Type , High Temperature Range, Vibration Resistance series Highly dependable reliability withstanding load life of 1000 hours at +150°C. Suited for automobile electronics where heavy duty services are indispensable. Adapted to the RoHS directive (2002/95/EC). BC High Temperature UE Specifications Item Performance Characteristics Category Temperature Range – 55 ~ +150°C Rated Voltage Range 10 ~ 50V Rated Capacitance Range 100 ~ 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. tan δ Rated voltage (V) 10 16 25 35 50 tan δ (MAX.) 0.22 0.18 0.16 0.14 0.12 120Hz 20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C (MAX.) 10 16 25 35 50 8 6 4 4 4 Capacitance change tan δ Leakage current 120Hz Within ±30% of initial value 300% or less of initial specified value Initial specified value or less Endurance After 1000 hours' application of rated voltage at 150°C, capacitors meet the characteristics requirements listed at right. Shelf Life After storing the capacitors under no load at 150°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Black print on the case top. Type numbering system (Example : 10V 1000µF) Chip Type Dimensions 10 1A V Cap.(µF) 100 220 330 470 680 1000 2200 3300 Code 101 221 331 471 681 102 222 332 16 1C 12.5 × 13.5 800 25 1E 35 1V 50 1H 12.5 × 13.5 420 12.5 × 13.5 550 16 × 16.5 550 650 12.5 × 13.5 650 12.5 × 13.5 650 16 × 21.5 12.5 × 13.5 750 12.5 × 13.5 700 16 × 16.5 750 16 × 21.5 850 12.5 × 13.5 800 16 × 16.5 800 16 × 21.5 950 18 × 21.5 1100 16 × 21.5 1000 18 × 21.5 1150 Case size φ D × L (mm) Rated ripple 12.5 × 13.5 900 16 × 16.5 850 18 × 21.5 18 × 21.5 1350 1400 18 × 21.5 1350 Rated Ripple (mArms) at 150°C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.67 300 Hz 0.79 1 kHz 0.91 10 kHz~ 1.00 Taping specifications are given in page 22. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V-1