HRS FX18-100P

NEW
10+Gbps 0.8mm pitch Board to Board Connectors
FX18 Series
■Mechanical features
● 0.8mm Pitch
● Variations :Coplanar / Vertical / Stacking
● Number of Contacts : 40 / 60 / 80 / 100 /
120/ 140
● Multi functional contact (MF contact) as;
q ground contact to enhance grounding.
w power supply contacts up to 12 A to reduce required pin
counts.
e 3-step sequential contacts for grounding and detection.
● Effective mating length of signal contact:
2.0 mm.
(MF contact A:2.5mm / MF contact B:1.5mm)
Single contact
● Pin through hole mounting MF contacts
increase strength against wrenching.
● Large mating guide for easy mating.
MF contact A
MF contact B
ICR
■Signal integrity features
Impedance
60
●Insertion Loss-to-Crosstalk-Ratio (ICR)
110
50
The insertion loss-to-crosstalk ratio (ICR)
with five-aggressor differential FEXT meets the
extrapolated IEEE802.3ap specification for
10+Gbps with plenty of margins.
105
Z (Ohms)
ICR (dB)
40
30
100
20
95
●Differential Impedance
10
The differential impedance is within 100±10
ohms at 35 ps rise time( 20% to 80%)
0
ICR
IEEE spec
0
2
4
6
Frequency (GHz)
8
10
90
Inner row
0
0.2
0.4
0.6
Time (ns)
0.8
1
■Variations
Coplanar connection
Vertical connection
FX18-**S-0.8SH
FX18-**P-0.8SH
FX18-**S-0.8SH
FX18-**P-0.8SV**
15~30
10.85
15.15
9.5
20.3
Stacking connection
FX18-**P-0.8SV
7.8
FX18-**S-0.8SV**
2012.4
1
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
■Product Specification
Current Rating0.5A(Signal) (Note3)
3.0A(MF contact )
Voltage Rating AC100V
Rating
Operating Temperature Range
Storage Temperature Range
Item
1.Contact Resistance
2.Insulation Resistance
3.Voltage Proof
4.Durabirity
(mating/unmating)
Specification
90m ohms max
1000M ohms min
No flashover or insulation breakdown
100mA
250V DC
300V AC / 1min
Contact resistance: 100m ohms max
500 cycles
5.Vibration
No electrical discontinuity of 1µs or more
6.Shock
No electrical discontinuity of 1µs or more
-55ç ~ 80ç (Note 1)
-10ç ~ 60ç (Note 2)
Condition
Frequency:10 to 55Hz, Approx 5 min
Single ampritude0.75mm, 10cycles for 3 directions
490m/s2,Duration of pulse 11ms,
at 3 time for 3 directions
96 hours at temperature of 40±2ç and
humidity of 90% to 95%
7.Humidity
(Steady state)
Contact Resistance :100m ohms max
Insulation Resistance: 1000M ohms min
Contact Resistance :100m ohms max
(-55ç:30 minutes,85ç:30minutes) under 5 cycle
8.Temperature Cycle
Insulation Resistance: 1000M ohms min
(Note 1) Includes temperature rise caused by current flow.
(Note 2) “Storage” means a long-term storage state for the unused product before assembly to pcb.
(Note 3) The rated current applies to per contact.
(Note 4) Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Material
●Receptacle / Header
Part Material
Insulator
PA
Signal contact
Phosphor bronze
Finish
Remark
Black
UL94V-0
Contact area:Gold plated
Lead area :Gold plated
MF contact
Phosphor bronze
Contact area:Gold plated
Lead area :Tin plated
––––––
––––––
■Ordering Information
●Right Angle Receptacle
❶ Series Name
FX18 - 60 S - 0.8 SH
❶
❷
❸
❹
❸ Connector Type S :Receptacle
❺
●Right Angle Header
FX18 - 60 P - 0.8 SH
❶
❷
❸
❹
❺
FX18 - 60 P - 0.8 SV 10
❷
❸
❹
❺
❻
●Straight Receptacle
FX18 - 60 S - 0.8 SV 15
❶
2
❷
❸
❹
❺
P :Header
❹ Contact Pitch
:0.8mm
❺ Contact Type
SH :Board Right Angle Type
SV :Board Straight Type
❻ Stacking Height Designation
●Straight Header
❶
：FX18
❷ Number of contacts
❻
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
■Function Chart
●Right Angle Receptacle
●Right Angle Header
【 FX18-**S-0.8SH 】
【 FX18-**P-0.8SH 】
Coplanar
connection
●Straight Receptacle
Vertical connection ●Straight
【 FX18-**S-0.8SV15 】
Header
【 FX18-**P-0.8SV 】
【 FX18-**S-0.8SV20 】
Stacking
connection
【 FX18-**P-0.8SV10 】
■Stacking connections Heights
Stacking Variation
Straight Header
FX18-**P-0.8SV**
FX18-**P-0.8SV
FX18-**P-0.8SV10
FX18-**S-0.8SV15
15mm
25mm
FX18-**S-0.8SV20
20mm
30mm
Straight Receptacle
FX18-**S-0.8SV**
■Signal Integrity
●Pin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSSG pin assignment is recommended for
FX18. (G=ground and S=signal)
Cross section of mating (coplanar connection)
Pin assignment ( In case of 40 pos. )
Contact
No.1
Contact
No.20
Contact
No.21
Contact
No.40
Outer row
Inner row
Signal pin
Diff pair
Inner row
Ground pin
Outer row
3
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
●Impedance
The differential impedance is 100±10 ohm for FX18 at 35 ps rise time (20% to 80%)
Outer row
110
105
Z (Ohms)
Z (Ohms)
105
100
95
90
Inner row
110
100
95
Outer row
0
0.2
0.4
0.6
Time (ns)
0.8
Inner row
90
1
0
0.2
0.4
0.6
Time (ns)
0.8
1
●Insertion Loss
The differential insertion loss crosses 1dB at 6GHz for FX18.
Outer row
-0.5
-0.5
-1
-1
-1.5
-1.5
-2
-2
-2.5
-2.5
-3
Outer row
0
2
Inner row
0
S (dB)
S (dB)
0
4
6
Frequency (GHz)
8
-3
10
Inner row
0
2
4
6
Frequency (GHz)
8
10
●Return loss
The differential return loss meets the IEEE 802.3ap specification to 10 GHz for FX18.
Outer row
-10
-10
-20
-20
-30
-40
-50
4
5
10
Frequency (GHz)
15
-30
-40
RL
IEEE Spec
0
Inner row
0
RL (dB)
RL (dB)
0
20
-50
RL
IEEE Spec
0
5
10
Frequency (GHz)
15
20
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
●Near-end crosstalk (NEXT)
The staggered GSSG pin assignments resulted in low differential NEXT.
Outer row
S12
-10
-10
-20
-20
-30
-40
-50
-50
0
2
4
6
Frequency (GHz)
8
-60
10
S12
-30
-40
-60
Inner row
0
S (dB)
S (dB)
0
0
2
4
6
Frequency (GHz)
8
10
8
10
●Far-end crosstalk (FEXT)
The staggered GSSG pin assignments resulted in low differential FEXT.
Outer row
S14
-10
-10
-20
-20
-30
-40
-50
-50
0
2
4
6
Frequency (GHz)
8
-60
10
S14
-30
-40
-60
Inner row
0
S (dB)
S (dB)
0
0
2
4
6
Frequency (GHz)
●Insertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with multi-aggressor differential FEXT meets the extrapolated
IEEE 802.3ap specification to 10+Gbps with plenty of margins.
Outer row
50
50
40
40
30
20
30
20
10
0
Inner row
60
ICR (dB)
ICR (dB)
60
10
ICR
IEEE spec
0
2
4
6
Frequency (GHz)
8
10
0
ICR
IEEE spec
0
2
4
6
Frequency (GHz)
8
10
5
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
A±0.2
P=0.8±0.15
●Right Angle Receptacle
0.25±0.1
B±0.2
No.F
11.9±0.2
9.5±0.15
No.1
3.6±0.15
5.1±0.2
C±0.15
No.H
1.5±0.15
1.2±0.15
1.35 +0.15
– 0.25
No.G
D±0.25
E±0.25
1.2±0.15
6.05±0.25
4.75±0.25
8.5±0.25
All dimensions in mm
A
15.2
23.2
31.2
39.2
47.2
55.2
B
27.9
35.9
43.9
51.9
59.9
67.9
C
25.0
33.0
41.0
49.0
57.0
65.0
D
18.4
26.4
34.4
42.4
50.4
58.4
E
24.65
32.65
40.65
48.65
56.65
64.65
F
20
30
40
50
60
70
G
21
31
41
51
61
71
H(pos.)
40
60
80
100
120
140
No marking, "under development"
●Right Angle Header
A±0.02
P=0.8±0.15
B±0.2
5.4±0.2
8.4±0.2
9.5±0.15
C±0.15
No.1
No.F
0.25±0.1
5.1±0.2
★ indicates "available".
HRS No.
CL579-0009-4
CL579-0010-3
CL579-0011-6
CL579-0012-9
CL579-0013-1
CL579-0014-4
3.55±0.15
★
★
★
★
★
★
Part Number
FX18-40S-0.8SH
FX18-60S-0.8SH
FX18-80S-0.8SH
FX18-100S-0.8SH
FX18-120S-0.8SH
FX18-140S-0.8SH
No.G
1.35 +0.15
– 0.25
No.H
D±0.25
E±0.25
1.2±0.15
1.5±0.15
2.55±0.25
1.2±0.15
4.75±0.25
5±0.25
All dimensions in mm
★
★
★
★
★
★
Part Number
FX18-40P-0.8SH
FX18-60P-0.8SH
FX18-80P-0.8SH
FX18-100P-0.8SH
FX18-120P-0.8SH
FX18-140P-0.8SH
★ indicates "available".
6
HRS No.
CL579-0002-5
CL579-0003-8
CL579-0004-0
CL579-0005-3
CL579-0006-6
CL579-0007-9
A
15.2
23.2
31.2
39.2
47.2
55.2
No marking, "under development"
B
27.9
35.9
43.9
51.9
59.9
67.9
C
24.95
32.95
40.95
48.95
56.95
64.95
D
18.4
26.4
34.4
42.4
50.4
58.4
E
24.65
32.65
40.65
48.65
56.65
64.65
F
20
30
40
50
60
70
G
21
31
41
51
61
71
H(pos.)
40
60
80
100
120
140
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
●Straight Header
A±0.2
B±0.2
P=0.8±0.15
0.25±0.1
No.H
7.8±0.2
No.G
No.1
No.F
C±0.15
1.35 +0.15
– 0.25
(8.65)
3.55±0.15
D±0.25
E±0.25
1±0.15
1.2±0.15
5.1±0.2
All dimensions in mm
★
★
★
★
Part Number
FX18-40P-0.8SV
FX18-60P-0.8SV
FX18-80P-0.8SV
FX18-100P-0.8SV
FX18-120P-0.8SV
FX18-140P-0.8SV
★ indicates "available".
HRS No.
CL579-0016-0
CL579-0017-2
CL579-0018-5
––––––
CL579-0020-7
––––––
A
27.9
35.9
43.9
51.9
59.9
67.9
B
15.2
23.2
31.2
39.2
47.2
55.2
C
24.95
32.95
40.95
48.95
56.95
64.95
D
18.4
26.4
34.4
42.4
50.4
58.4
E
24.65
32.65
40.65
48.65
56.65
64.65
F
20
30
40
50
60
70
G
21
31
41
51
61
71
H(pos.)
40
60
80
100
120
140
No marking, "under development"
A±0.2
B±0.2
●Straight Header (10 type)
P=0.8±0.15
0.35±0.1
No.H
7.8±0.2
No.G
No.1
No.F
3.55±0.15
★
★
★
★
Part Number
FX18-40P-0.8SV10
FX18-60P-0.8SV10
FX18-80P-0.8SV10
FX18-100P-0.8SV10
FX18-120P-0.8SV10
FX18-140P-0.8SV10
★ indicates "available".
HRS No.
CL579-0022-2
CL579-0023-5
CL579-0024-8
―――
CL579-0025-0
―――
A
27.9
35.9
43.9
51.9
59.9
67.9
B
15.2
23.2
31.2
39.2
47.2
55.2
C
24.95
32.95
40.95
48.95
56.95
64.95
D
18.4
26.4
34.4
42.4
50.4
58.4
E
24.65
32.65
40.65
48.65
56.65
64.65
F
20
30
40
50
60
70
4.9±0.2
2±0.2
1.35 −0.3
1.2±0.15
1.2±0.15
4.9±0.2
2±0.2
D±0.25
E±0.25
＋0.15
18.65±0.3
C±0.15
All dimensions in mm
G
21
31
41
51
61
71
H(pos.)
40
60
80
100
120
140
No marking, "under development"
7
A±0.2
B±0.15
C±0.2
P= 0.8±0.15 0.35±0.1
No.G
7.8±0.2
No.H
5.1±0.2
●Straight Receptacle(15type)
3.6±0.15
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
No.1
4.9±0.2
1.2±0.15
2±0.2
1.2±0.15
4.9±0.2
2±0.2
D±0.25
E±0.25
1.35 +0.15
-0.3
11.45±0.3
No.F
All dimensions in mm
★ indicates "available".
A
27.9
35.9
43.9
51.9
59.9
67.9
B
25
33
41
49
57
65
C
15.2
23.2
31.2
39.2
47.2
55.2
D
18.4
26.4
34.4
42.4
50.4
58.4
E
26.05
34.05
42.05
50.05
58.05
66.05
F
20
30
40
50
60
70
G
21
31
41
51
61
71
H(pos.)
40
60
80
100
120
140
No marking, "under development"
●Straight Receptacle(20type)
No.G
7.8±0.2
No.H
A±0.2
B±0.15
C±0.2
P=0.8±0.15 0.35±0.1
5.1±0.2
★
HRS No.
CL579-0026-3
CL579-0027-6
CL579-0028-9
––––––
CL579-0029-1
―――
3.6±0.15
★
★
★
Part Number
FX18-40S-0.8SV15
FX18-60S-0.8SV15
FX18-80S-0.8SV15
FX18-100S-0.8SV15
FX18-120S-0.8SV15
FX18-140S-0.8SV15
No.1
16.45±0.3
No.F
★
★
★
★
Part Number
FX18-40S-0.8SV20
FX18-60S-0.8SV20
FX18-80S-0.8SV20
FX18-100S-0.8SV20
FX18-120S-0.8SV20
FX18-140S-0.8SV20
★ indicates "available".
8
HRS No.
CL579-0030-0
CL579-0031-3
CL579-0032-6
―――
CL579-0033-9
―――
A
27.9
35.9
43.9
51.9
59.9
67.9
No marking, "under development"
B
25
33
41
49
57
65
C
15.2
23.2
31.2
39.2
47.2
55.2
D
18.4
26.4
34.4
42.4
50.4
58.4
E
26.05
34.05
42.05
50.05
58.05
66.05
F
20
30
40
50
60
70
4.9±0.2
1.2±0.15
2±0.2
1.2±0.15
4.9±0.2
2±0.2
+0.15
1.35 -0.3
D±0.25
E±0.25
All dimensions in mm
G
H(pos.)
21
40
31
60
41
80
51
100
61
120
71
140
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
■Recommended Land Pattern Dimension of PCB
(PCB thickness: t=1.6mm / Metal mask thickness: t=0.12mm)
＋0.1
2.1　0
(TH)
FX18-40P-0.8SH
FX18-60S-0.8SH
FX18-60P-0.8SH
＋0.05
0.4 0
A±0.05
B±0.05
FX18-80S-0.8SH
FX18-80P-0.8SH
FX18-100S-0.8SH
2±0.05
P=0.8±0.05
2.1 ＋0.1
0
.5
R0
4.05±0.05
1.7 +0.1
(TH)
0
8.4±0.05
＋0.1
(TH)
1　0
Part Number
FX18-40S-0.8SH
＋0.1
＋0.1
1 0
2 0 (TH)
2 +0.1
(TH)
0
6.5±0.05
4.75±0.05
●Right Angle Receptacle / Right Angle Header
FX18-100P-0.8SH
FX18-120S-0.8SH
PCB EDGE
C±0.05
FX18-120P-0.8SH
FX18-140S-0.8SH
FX18-140P-0.8SH
A
B
C
15.2
18.4
24.65
23.2
26.4
32.65
31.2
34.4
40.65
39.2
42.4
48.65
47.2
50.4
56.65
55.2
58.4
64.65
+0.05
0
2.1 +0.1
0
.5
R0
1.2 +0.1
0 (TH)
5.1±0.05
P=0.8±0.05 0.4
A±0.05
A
B
C
FX18-40P-0.8SV
15.2
18.4
24.65
FX18-60P-0.8SV
23.2
26.4
32.65
FX18-80P-0.8SV
31.2
34.4
40.65
FX18-100P-0.8SV
39.2
42.4
48.65
FX18-120P-0.8SV
47.2
50.4
56.65
FX18-140P-0.8SV
55.2
58.4
64.65
Part Number
A
B
C
Part Number
8.4±0.05
1 +0.1
(TH)
0
2.1 +0.1
0
1 +0.1
(TH)
0
2 +0.1
(TH)
0
1.8 +0.1
(TH)
0
●Straight Header
B±0.05
C±0.05
0.5
+0.1
2.1 0
P=0.8±0.05
+0.05
0
2±0.05
R0
.5
1.4+0.1
0（TH）
8.4±0.05
+0.1
0 (TH)
+0.1
2±0.05
1
2.1 0
1 +0.1
0 (TH)
2 +0.1
0 (TH)
4.9±0.05
2 +0.1
0（TH）
●Straight Header (SV 10 type)
A±0.05
B±0.05
C±0.05
FX18-40P-0.8SV10
15.2
18.4
24.65
FX18-60P-0.8SV10
23.2
26.4
32.65
FX18-80P-0.8SV10
31.2
34.4
40.65
FX18-100P-0.8SV10
39.2
42.4
48.65
FX18-120P-0.8SV10
47.2
50.4
56.65
FX18-140P-0.8SV10
55.2
58.4
64.65
Part Number
A
B
C
0.5 ＋0.05
0
2±0.05
P=0.8±0.05
2.1 ＋0.1
0
.5
R0
1.4+0.1
0（TH）
4.9±0.05
8.4±0.05
1 +0.1
0 (TH)
2.1 ＋0.1
0
+0.1
0 (TH)
+0.1
2 0（TH）
1
2±0.05
2 +0.1
0 (TH)
●Straight Receptacle (SV 15 / SV20 type)
FX18-40S-0.8SV15/20
15.2
18.4
26.05
FX18-60S-0.8SV15/20
23.2
26.4
34.05
FX18-80S-0.8SV15/20
31.2
34.4
42.05
FX18-100S-0.8SV15/20
39.2
42.4
50.05
FX18-120S-0.8SV15/20
47.2
50.4
58.05
FX18-140S-0.8SV15/20
55.2
58.4
66.05
A±0.05
B±0.05
C±0.05
9
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
■Packing specification
●Right Angle Receptacle / Right Angle Header
(325)
(45)
(235)
(30)
(P=47)
A
FX18-60P/S-0.8SH
Part Number
FX18-40S-0.8SH
FX18-40P-0.8SH
(P=18)
FX18-60S-0.8SH
FX18-60P-0.8SH
FX18-80S-0.8SH
(225)
(162)
FX18-80P-0.8SH
FX18-100S-0.8SH
FX18-100P-0.8SH
FX18-120S-0.8SH
FX18-120P-0.8SH
FX18-140S-0.8SH
FX18-140P-0.8SH
Quantity
70
60
50
40
40
40
>PS<
QTY.60
●Straight Header
(325)
(230±0.5)
(47.5)
(P=46)
FX18-60P-0.8SV
(225)
(162)
(P=18)
(31.5)
A
QTY.60
10
>PS<
Part Number
Quantity
FX18-40P-0.8SV
70
FX18-60P-0.8SV
60
FX18-80P-0.8SV
50
FX18-100P-0.8SV
40
FX18-120P-0.8SV
40
FX18-140P-0.8SV
40
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
●Straight Header 10 type / Straight Receptacle (15/20 type)
Part Number
(325)
(230)
(31.5)
(47.5)
(P=46)
FX18-40S-0.8SV15
FX18-60S-0.8SV20
Ａ
60
FX18-40S-0.8SV20
FX18-60P-0.8SV10
FX18-60P-0.8SV10
FX18-60S-0.8SV15
60
(P=18)
FX18-60S-0.8SV20
FX18-80P-0.8SV10
FX18-80S-0.8SV15
50
FX18-80S-0.8SV20
(162)
(225)
Quantity
FX18-40P-0.8SV10
FX18-100P-0.8SV10
FX18-100S-0.8SV15
40
FX18-100S-0.8SV20
FX18-120P-0.8SV10
FX18-120S-0.8SV15
40
FX18-120S-0.8SV20
QTY.60
>PS<
FX18-140P-0.8SV10
FX18-140S-0.8SV15
40
FX18-140S-0.8SV20
■Mounting Temperature Profile (Reference)
260
(MAX 250ç)
240
220ç
220
200ç
200
Temperature
180
160
140
150ç
(ç)
0
90±120s
Pre-heating time
(150 to 200ç)
MAX 60s
Soldering Time
(220ç min.)
Time (Second)
HRS test conditions
Test board dimension
material
Solder method
Solder composition
Metal mask
Reflow cycle
: 110∞50∞1.6mm
: Glass epoxy
: Reflow
: Paste
Sn-3Ag-0.5Cu
: 0.12mm thick
: 2 cycle
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, Volume/thickness and
board size/thickness.
Consult your solder paste and equipment manufacturer
for specific recommendations.
11
FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors
■Cleaning recommendations
●Organic solvent cleaning
Solvent Type
Room temperature cleaning
Heated cleaning
IPA ( Isopropyl alcohol)
YES
YES
HCFC ( Hydrochlorofluorocarbon )
YES
YES
●Water based cleaning
When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation
issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any
moisture after cleaning.
Residual flux or cleaning agents in the contact areas may affect electrical performance.
■Connector Precautions
●Allowable Clearance between the Mated Pair
Within 1mm
Recommend the allowable clearance at mating including angled insertion to be Max.1mm.
Within 1mm
Within 1mm
Coplanar connection
Vertical connection
Stacking connection
●PCB Fixture
PCB and chassis can not be stabilized only by the connector.
Fixture to stabilize the PCB is necessary.
When fitting using a rotary insertion plug, please ensure you refer to the Rotary Insertion Guideline (TADC 4-210630)
®
12
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 04/2012. Contents are subject to change without notice for the purpose of improvements.