General Purpose Relays PCB Relays SCHRACK Power Relay 41083 3mm n1 pole 16A, 1 form X, double make, bridging contact gap >3mm nSwitching capacity 4000VA nCoil power 360mW n4kV/8mm coil-contact, insulation to VDE 0631 and 0700 nAmbient temperature 85°C; max. 105° at 10A nQuick connect terminals for load side nMaterials in accordance to IEC 60335-1 nContact Typical applications Washing machines, tumble dryers, absolute safe power supply disconnection in other domestic applications F0248-BB VZ Approvals Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 VDE REG.-Nr. 6198, UL E214025 Technical data of approved types on request Contact Data Contact arrangement 1 form X, double make (NO) Contact gap >3mm/full disconnection Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A Limiting making current, max. 4s, duty factor 10% 20A Breaking capacity max. 4000VA Contact material AgNi Contact style single contact, bridging contact Frequency of operation, with/without load 600/36000h-1 Contact ratings Type Contact IEC 61810 410 83 A (NO) 410 83 A (NO) 410 83 A (NO) Load Release voltage VDC 0.68 0.45 0.9 1.8 3.6 4.5 Coil resistance Ω±10% 230 100 400 1600 6400 10000 Rated coil power mW 360 360 360 360 360 360 All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. Cycles 16A, 250VAC resistive, 85°C 10A, 250VAC resistive, 105°C 10A, 400VAC resistive, 105°C Mechanical endurance Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 053 9 5.9 054 6 3.9 050 12 7.9 046 24 15.8 043 48 31.6 042 60 39.5 6 to 60VDC 1 class F 30x103 100x103 100x103 >1x106 operations Coil Data Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 2000Vrms 4000Vrms ≥8/8mm IIIa PTI250V Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power Relay 41083 3mm (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version according EN60335-1, par.30 Ambient temperature -20 to +85°C max. +105°C at 10A Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional), form A (NO), 10 to 500Hz 10g Shock resistance (destructive) 100g Terminal typePCB-THT, quick connect for load side Weight 24g Resistance to soldering heat THT IEC 60068-2-20, flux proof version 270°C/10s Packaging/unit tray/75 pcs., box/1050 pcs. PCB layout / terminal assignment Bottom view on solder pins S0256-CA 1 form X, double make contact S0256-CD Dimensions S0282-AB Product code structure Typical product code 041083 050 001 WG Type 41083 Power Relay 410 83 3 mm Coil Coil code: please refer to coil versions table Version 001 1 form X. double make (NO) contact Version WG Product in accordance with IEC 60335-1 (domestic appliances) Other types on request Product code 2 Contact arrangement Contact material Coil Version 0410 83 046 001 1 form X AgNi 24VDC Standard 0410 83 046 001WG double make (NO) IEC60335-1 compliant 0410 83 050 001WG 3mm contact gap 12VDC 0410 83 053 001WG 9VDC 0410 83 054 001WG 6VDC This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part Number 4-1415410-8 8-1415536-6 8-1415536-7 8-1415536-8 8-1415536-9 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.