VECTRON TFS190E_05

Filename: tfs 190e.doc
Version 1.2
VI TELEFILTER
23.12.2005
Filter specification
TFS 190E
1/5
Measurement condition
°C
dBm
Ambient Temperature:
23
Input Power Level:
0
Terminating Impedance at fc*:
input:
output:
307 Ω // - 12,4 pF
107 Ω // - 16,9 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of TFS 190E is the minimum of the pass band attenuation amin. This minimum is defined as the
insertion loss ae. The nominal frequency fN is fixed at 190 MHz without any tolerance. The given values for the relative attenuation arel and the group
delay ripple have to be reached at the frequencies given below, even if the centre frequency fc is shifted due to the temperature coefficient of frequency
TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
typ. Value
Insertion Loss
(Reference Level)
ae = amin
Nominal Frequency
fN
-
Pass Band
PB
125
Group Delay Variation within PB
Relative Attenuation
fN
... fN ±
@
fN ±
2,50 MHz ...
@
fN - 180,00 MHz ...
fN +
3,75 MHz ...
fN + 60,00 MHz ...
arel
1,92 MHz
fN ±
2,50
fN ±
3,75
fN +
3,75
fN 3,75
fN + 60,00
fN + 310,00
21,0 dB
52
50
54
58
54
60
± 1,92 MHz
fN
ns
dB
dB
dB
dB
dB
dB
max. 300
ns p-p
max.
1
dB
min.
min.
min.
min.
min.
min.
30
30
45
48
43
50
dB
dB
dB
dB
dB
dB
-30...
Operating Temperature Range
-40... +85
Storage Temperature Range
Temperature Coefficient of frequency TCf
max. 24,0 dB
190,0 MHz
0,8 dB
MHz
MHz
MHz
MHz
MHz
MHz
Limit
**
- 0,036 ppm / K2
+85 ° C
°C
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TCf(ppm/K) x (T-T0)2 x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190e.doc
Version 1.2
VI TELEFILTER
23.12.2005
Filter specification
TFS 190E
2/5
Filter characteristic
0
0
5.11
-6
-1
4.87
-2
4.63
-3
4.39
-4
4.15
-5
3.91
-6
3.67
-7
3.43
-8
3.19
-9
2.95
-12
-18
-30
-36
delay in µs
magnitude in dB
magnitude in dB
-24
-42
-48
-54
-60
180
182
184
186
188
190
192
frequency in MHz
194
196
198
-10
188
200
188.4
188.8
189.2
189.6
190
190.4
frequency in MHz
190.8
191.2
191.6
2.71
192
Construction and pin connection
(All dimensions in mm)
9 ±0,2
24,64 ±0,2
TFS 190E
●
T52
1
Input RF Return
Ground
Ground
Ground
Output
Output RF Return
Ground
Ground
Ground
Input
Date code:
T
U
V
...
Year + week
2005
2006
2007
2,6 Max.
Date code
1
2
3
4
5
6
7
8
9
10
2,31
3,53X4,83
1 2 3 4 5
10 9 8 7 6
1,02
1,91 ±0,2
50 Ohm Test circuit
L1
10
1
5
SAW
L2
6
C2
C1
2, 3, 4, 7, 8, 9
Stability characteristics, reliability
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190e.doc
Version 1.2
VI TELEFILTER
23.12.2005
Filter specification
TFS 190E
3/5
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
Pull Off Direction
Ko
Date Code
P1
P2
Ao
Bo
Po
Ct
So
Do
E
t
W
Tape (all dimensions in mm)
W
: 44,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 20,20 ± 0,15
P2
: 2,00 ± 0,15
P1
: 16,00 ± 0,1
D1(min)
: 2,00
Ao
: 9,30 ± 0,1
Bo
: 24,90 ± 0,1
So
: 40,40 ± 0,1
Ct
: 38,0 ± 0,1
1000
min. 300 mm
min. 500 mm
min. 300 mm
Type
PIN Marker
D1
W2
Reel (all dimensions in mm)
A
: 330
W1
: 44,4 +2/-0
W2(max) : 50,4
N(min)
: 100
C
: 13,0 +0,5/-0,2
C
A
N
W1
The minimum bending radius is 45 mm.
Air reflow temperature conditions
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190e.doc
Version 1.2
VI TELEFILTER
23.12.2005
Filter specification
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
TFS 190E
4/5
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 190e.doc
VI TELEFILTER
Version 1.2
Filter specification
23.12.2005
TFS 190E
5/5
History
Version
Reason of Changes
Name
Date
1.0
generation of specification according to customer requirements
Pfeiffer
30.10.2001
1.1
typical values added
terminating impedance added (preliminary value)
Pfeiffer
05.02.2002
1.2
- typical values corrected and added
- filter characteristic added
- air reflow temperature conditions and stability characteristics modified
Pfeiffer
23.12.2005
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.