Molex LED Array Holders simplify the installation process for small-fixture applications for OEMs using Sharp* Mega and Mini Zenigata arrays to reduce installation time with compression contacts that eliminate hand soldering LED technology has been proven to reduce the amount of energy consumed and is becoming a more reliable, efficient and user-friendly way for accommodating general illumination requirements. Using unmatched interconnect technology, Molex provides a solderless solution to mounting LED arrays into OEM designs. The holders allow customers to install LED arrays quickly into fixtures, enable field replacements and facilitate upgrades to current applications. LED Array Holder for Sharp* Mega Zenigata (COB) and Sharp Mini Zenigata (COB) Arrays 180330 M ega Zenigata (COB) Array 180390 M ini Zenigata (COB) Array Features and Benefits Compression contacts deliver power to array Stable connection in high-ambient temperature. Simplifies the LED installation process by eliminating hand soldering or expensive Surface Mount Technology (SMT) equipment. Reduces installation time Double-ended wire-trap terminal to attach power source Allows for wiring serial or parallel LED sequences, ensuring ease of array assembly Screw-mount attachment method for securing array to heat sink Provides voltage isolation between LED and heat sink with external mounting holes Releasable wire trap for rework or replacement Allows for field serviceability High-temperature thermoplastic housing Supports high heat-generating environments Overall form factor is less than 50.00mm in diameter for Mega Zenigata (COB) arrays and 30.00 by 36.20mm for Mini Zenigata (COB) arrays Ideal for lamp and small-fixture applications Optional Zhaga cover for Mega Zenigata array only Provides Zhaga compliant landing interface for optical LED Array Holder for Mega Zenigata (COB) Array LED Array Holder for Mini Zenigata (COB) Array Specifications Reference Information Packaging: Tray UL File No.: Pending CSA File No.: Pending Designed In: Millimeters RoHS: Yes REACH: Yes Electrical Voltage (max.): 300V DC Current (max.): M ega Zenigata – 2.5A continuous; 3.5A max. Mini Zenigata – 3.0A continuous; 4.0 Contact Resistance: 20 milliohms max. Dielectric Withstanding Voltage: 300V DC Insulation Resistance: 5000 Megohms min. Mechanical Wire Insertion Force: 5N (1.12 lbf) max. Wire Pull Out Force: 25N (5.62 lbf) max. Durability (min.): Mega Zenigata – 5 Cycles Mini Zenigata – 20 Cycles *Sharp is a registered trademark of Sharp Electronics Corporation Physical Housing: PA66 Nylon GF Contact: Copper (Cu), Nickel (Ni) and Silver (Ag) Plating: Contact Area — Select Gold (Au) Solder Tail Area — Silver (Ag) Underplating — Nickel (Ni) LED Array Holder for Sharp* Mega Zenigata (COB) and Sharp Mini Zenigata (COB) Arrays Applications All general illumination applications – Downlighting – Track – Pendants – Linear Area Lighting – Roadways – Parking Lots – Wall Packs Recessed down-lighting in residential and commercial buildings LED Array Holder for Sharp Mega Zenigata Sharp Mega Zenigata Array LED Array Holder for Sharp Mega Zenigata (180330-0002) LED Array Holder for Sharp Mega Zenigata Array with Zhaga compliant cover (180330-0003) LED Array Holder for Sharp Mini Zenigata Sharp Mini Zenigata Array LED Array Holder for Sharp Mini Zenigata (180390-0002) Ordering Information Order No. Sharp Mega 180330-0002 180330-0003 180390-0002 Component Plating Zhaga Cover Gold (Au) Yes No Mega Zenigata Mini Zenigata No *Sharp is a registered trademark of Sharp Electronics Corporation www.molex.com/link/sharp.html www.molex.com/industry/solidstatelighting.html Order No. 987650-7242 Rev. 1 Printed in USA/KC/2012.05 ©2012 Molex