Bussmann® Telpower Fused Disconnect Switch 15800 ® DC Distribution Protection System 145 Volt DC, 3-70 Amps • • • • • • • • • • Branch circuit protection recognized. Mounts directly to bus bar to enhance reliability. Includes alarm signaling circuit (visual & remote). Common Alarm Bus. Front access version for load connections. For use with Bussmann Fuse Type TPS GMT-A Alarm Fuse. Thermoplastic housing material U.L. Rated V-O, 150°C. Spare alarm and power fuse compartment. Mounting hardware included. FUSED DISCONNECT SWITCH for TPS Series Fuses CATALOG SYMBOLS: Disconnect Switch: 15800 DC DISTRIBUTION/PROTECTION SYSTEM ELECTRICAL RATING–145 VOLTS DC 1 TO 70 AMPERES U.L. RECOGNIZED FILE E97649, Guide QPQYZ U.L. WITHSTAND RATING 100,000 AMPS, 145 VOLTS DC Catalog Numbers 15800-R-200 Rear Access Panel Mounting 15800-F-200 Front Access Panel Mounting Dimensional Data Load Connection Load Connection Pull Out Fuse Disconnect W/Spare Fuse Storage 4.00" (101.6mm) 4.5" (114.3mm) 3.40" 3.75" (87.4mm) (95.25mm) GMT-A Alarm Fuse .50" 3.54" (12.7mm) Line Connection Line Connection (89.9mm) 1" 3.61" (25.4mm) (91.69mm) Rear Access Front Access The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-16-98 SB98107 Rev. A Form No. 15800 Page 1 of 1 BIF Doc #5002