Bussmann® Fast-Acting C520-1 C520-1 Glass Fuses Dimensional Data 14.0 ± 0.6 5.1 ± 0.1 Dimensions are in millimeters (mm) Time-Current Characteristic Curve CATALOG SYMBOL: C520-1 GLASS FUSE OPERATING TEMPERATURE: –55°C to 125°C INTERRUPTING RATING: 100A, 350 VAC AGENCY INFORMATION: UL LISTED, FILE #E19180 CSA CERTIFIED, FILE #701159 10,000 1,000 Electrical Characteristics 100 Minimum 4 Hrs. N/A N/A Maximum N/A 1 Hr. 5 Sec. TIME IN SECONDS Blow Time Testing Current 110% 135% 200% 10 1 Catalog Ampere Number Rating C520-1 1A Voltage Nom. Max. Max. Max. Rating Cold Volt-Drop Melting I2T Power (Volt) (ohm) (mV) (A2Sec) Dissipation 350V 0.098 145 0.68 0.21 CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 0.1 0.01 1 2 3 4 5 6 7 8 9 10 CURRENT IN AMPERES The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. C520-1 Page 1 of 1 BIF Doc #2082