Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package E BC For use as a Medium Power Amplifier ABSOLUTE MAXIMUM RATINGS DESCRIPTION Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Power Dissipation @ Ta=25ºC VALUE 40 75 6.0 800 0.75 UNIT V V V mA W 2.2 W 1.2 W 1.5 W Tj, Tstg - 55 to +150 ºC Rth (j-c) Rth (j-a) 57 167 ºC/W ºC/W Rth (j-a) 104 ºC/W Rth (j-a) 83 ºC/W SYMBOL VCEO VCBO VEBO IC Power Dissipation @ Tc=25ºC @ Ta=25ºC PCB Land Area for Collector Lead >1 sq inch @ Ta=25ºC with heat sink Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to Case Junction to Ambient in free air Thermal Resistance >with PCB land area for collector lead >1 sq inch Thermal Resistance Junction to Ambient with heat sink PD ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise ) DESCRIPTION SYMBOL TEST CONDITION *VCEO IC=10mA, IB=0 Collector Emitter Voltage VCBO Collector Base Voltage IC=10µA, IE=0 V Emitter Base Voltage IE=10µA, IC=0 EBO ICEX VCE=60V, VEB(off)=3V Collector Cut Off Current ICBO VCB=60V, IE=0 Collector Cut Off Current VCB=60V, IE=0, Ta=150ºC IEBO VEB=3V, IC=0 Emitter Cut Off Current IBL VCE=60V, VEB(off)=3V Base Cut Off Current hFE IC=0.1mA, VCE=10V DC Current Gain IC=1mA, VCE=10V IC=10mA, VCE=10V IC=150mA, VCE=10V IC=150mA, VCE=1V IC=500mA, VCE=10V MIN 40 75 6 MAX 10 10 10 10 20 35 50 75 100 50 40 UNIT V V V nA nA µA nA nA 300 *Pulse Test: Pulse Width < 300µ µ s, Duty Cycle < 2% TN2222ARev080304E Continental Device India Limited Data Sheet Page 1 of 5 NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package E BC ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Emitter Saturation Voltage Base Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS DESCRIPTION Output Capacitance Input Capacitance Small Signal Current Gain Collector Base Time Constant Noise Figure Real Part of Common Emitter High Frequency Input Impedance SWITCHING TIME DESCRIPTION Delay Time SYMBOL *VCE (sat) *VBE (sat) TEST CONDITION IC=150mA, IB=15mA IC=500mA, IB=50mA IC=150mA, IB=15mA IC=500mA, IB=50mA SYMBOL Cobo TEST CONDITION VCB=10V, IE=0, f=100KHz Cibo hfe VEB=0.5V, IC=0, f=100KHz IC=1mA, VCE=10V, f=1KHz IC=10mA, VCE=10V, f=1KHz IE=20mA, VCE=20V, f=31.8MHz IC=100µA, VCE=10V, RS=IKΩ, f=1KHz, Bw=1KHz IC=20mA, VCE=20V, f=300MHz rb'CC NF Re(hie) SYMBOL td tr Rise Time ts Storage Time tf Fall Time *Pulse Test: Pulse Width < 300µ µ s, Duty Cycle < 2% TEST CONDITION IC=150mA, IB1=15mA, VCC=30V, VBE(off)=0.5V IC=150mA, IB1= IB2=15mA, VCC=30V MIN 0.6 MIN 50 75 MIN MAX 0.3 1.0 1.2 2.0 UNIT V V V V MAX 8.0 UNIT pF 25 300 375 pF 150 pS 4.0 dB 60 Ω MAX 10 UNIT ns 25 ns 225 60 ns ns TN2222ARev080304E Continental Device India Limited Data Sheet Page 2 of 5 TN2222A TO-237 Plastic Package F DIM A B C D E F G H J K L M MIN. MAX. 4.32 5.33 4.45 5.20 3.18 4.19 0.41 0.55 0.35 0.50 — 5.40 1.14 1.40 — 2.54 1.03 1.20 12.70 — 5 DEG 1.982 2.082 1.20 1.40 N All dimensions are in mm H A Uncontrolled 1 2 3 K D E Beyond 'M' Solderability Ensured M Dimension With 'M' B D A A SEC AA G L C 3 2 1 Mold Parting Line N J L PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER 3 2 1 The TO-237 Package, Tape and Ammo Pack Drawings are correct as on the date of issue/revision of this Data Sheet. The currently valid dimensions and information, may please be confimed from the TO-237 Drawing in the Package and Packing Section of the Product Catalogue. Packing Details PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-237 Bulk 1K/polybag 240 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 26.2 kgs TO-237 T&A 2K/ammo box 725 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 13.8 kgs TN2222ARev080304E Continental Device India Limited Data Sheet Page 3 of 5 TN2222A TO-237 Plastic Package TO-237 Tape and Ammo Pack Tape Mechanical Data T1 A1 h1 Ammo Pack Style h1 Adhesive Tape on Top Side A2 h B h (p) P Flat side A H3 H2 Label C1 H1 Carrier Strip 186 (7.3") W2 C2 Ho D FEE Wo W1 L W F1 F2 332 Do F t1 43 (1.7 ") P2 t Po ") (1 3 Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions are in mm ITEM BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT * 1 FEED HOLE PITCH * 2 FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS * 3 COMPONENT ALIGNMENT SIDE VIEW * 4 COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER * 5 TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE HEAT SINK WIDTH HEAT SINK HEIGHT HEAT SINK THICKNESS SPECIFICATION SYMBOL A1 A T P Po MIN. NOM. MAX. 4.0 4.8 3.9 TOL . 4.8 5.2 4.2 NOTES 12.7 12.7 ± 1.0 ± 0.3 6.35 ± 0.4 F 5.08 + 0.6 - 0.2 h h1 W Wo W1 0 0 18 6 9 W2 Ho H1 L Do t F1, F2 0.5 16 P2 H2 H3 | C1 - C2 | (p) 1.0 1.3 ± 0.5 ± 0.2 + 0.7 - 0.5 ± 0.2 ± 0.5 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. 6. Splices should not interfere with the sprocket feed holes. 23.25 11.0 4 ± 0.2 1.2 2.54 0.45 1.45 3.0 0.22 6N 5.40 2.54 0.45 A2 B T1 + 0.4 - 0.1 REMARKS * 1 Cumulative pitch error 1.0 mm/20 pitch * 2 To be measured at bottom of clinch * 3 At top of body * 4 At top of body * 5 t1 0.3 – 0.6 mm TN2222ARev080304E Continental Device India Limited Data Sheet Page 4 of 5 Customer Notes TN2222A TO-237 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for C inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 [email protected] www.cdilsemi.com TN2222ARev080304E Continental Device India Limited Data Sheet Page 5 of 5