CE RL201G THRU RL207G CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0Amperes FEATURES . The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 . High current capaility . Low reverse leakage . Glass passivated junction . Low forward voltage drop . High temperature soldering guaranteed: 350 /10 seconds, 0.375"(9.5mm)lead length,5lbs.(2.3kg)tension MECHANICAL DATA . Case: JEDEC DO-15 molded plastic body . Terminals: Plated axial lead solderable per MIL-STD-750,method 2026 . Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) . Mounting Position: Any . Weight: 0.014 ounce, 0.39 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive) load. For capacitive load,derate by 20%) Symbols 1N 1N 1N 1N 1N 1N 1N Units 201G 202G 203G 204G 205G 206G 207G Maximum repetitive peak reverse voltage VRRM 50 100 300 400 600 200 1000 Volts Maximum RMS voltage VRMS 35 70 210 280 420 140 700 Volts Maximum DC blocking voltage VDC 50 100 300 400 600 200 1000 Volts Macimum average forward rectified I(AV) 2.0 Amps IFSM 70.0 Amps VF 1.1 Volts current 0.375"(9.5mm)lead length at TA=75 Peak forward surge current 8.3ms sing-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 2.0 A Maximum reverse TA=25 current at rated DC blocking voltage TA=100 5.0 50.0 R Typeical thermal resistance(Note 2) A IR JA CJ Typical junction Capacitance(Note 1) Operating and storage temperature range TJ 40.0 20.0 /W pF -50 to +175 TSTG Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V DC 2.Thermal resistance from juntion to ambient and from junction lead at 0.375"(9.5mm)lead length, P.C.B. Mounted Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE RL201G THRU RL207G CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0Amperes RATINGS AND CHARACTERISTIC CURVES RL201G THRU RL207G FIG.2-TYPICAL INSTANTANEOUS FORWARD FLG.1-FORWARD CURRENT DERATING CURVE CHARACTERISTICS FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.5-TYPICAL JUNCTION CAPACITANCE Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2