TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 FEATURES TYPICAL APPLICATIONS • • • • • • OPERATIONAL AMPLIFIER – Low Offset Voltage, Max of: • TSM104WA…3 mV (25°C) and 4 mV (Full Temperature) • TSM104W…5 mV (25°C) and 6 mV (Full Temperature) – Low Supply Current…375 µA/Channel Typ at VCC = 5 V – Unity Gain Bandwidth…0.9 MHz Typ – Input Common-Mode Range Includes GND – Large Output-Voltage Swing…0 V to VCC – 2 V – Wide Supply-Voltage Range…3 V to 30 V – 2-kV ESD Protection (HBM) VOLTAGE REFERENCE – Adjustable Output Voltage…VREF to 36 V – VREF = 2.5 V With Tight Tolerance, Max of: • TSM104WA…0.4% (25°C) and 0.8% (Full Temperature) • TSM104W…1% (25°C) and 2% (Full Temperature) – Low Temperature Drift…7 mV Typ Over Operating Temperature Range – Wide Sink-Current Range…0.5 mA Typ to 100 mA – Output Impedance…0.2 Ω Typ Battery Chargers Switch-Mode Power Supplies Linear Voltage Regulation Data-Acquisition Systems D (SOIC), N (PDIP), OR PW (TSSOP) PACKAGE (TOP VIEW) 1OUT 1 16 4OUT 1IN− 2 15 4IN− 1IN+ 3 14 4IN+ VCC+ 4 13 VCC− 2IN+ 5 12 3IN+ 2IN− 6 11 3IN− 2OUT 7 10 3OUT ADJUST 8 9 CATHODE DESCRIPTION/ORDERING INFORMATION The TSM104W combines the building blocks of a quad operational amplifier and an adjustable voltage reference, both of which often are used in the control circuitry of switch-mode power supplies. For the A grade, especially tight voltage regulation can be achieved through the low offset voltage for each operational amplifier (typically 0.5 mV) and tight tolerance for the voltage reference (0.4% at 25°C and 0.8% over operating temperature range). The TSM104W and TSM104WA are characterized for operation from –40°C to 105°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2006, Texas Instruments Incorporated TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 ORDERING INFORMATION TA MAX VIO AND VREF TOLERANCE (25°C) PACKAGE (1) PDIP – N A grade 3 mV, 0.4% SOIC – D TSSOP – PW –40°C to 105°C PDIP – N Standard grade 5 mV, 1% SOIC – D TSSOP – PW (1) TOP-SIDE MARKING ORDERABLE PART NUMBER Tube of 25 TSM104WAIN Tube of 75 TSM104WAID Reel of 2500 TSM104WAIDR Tube of 75 TSM104WAIPW Reel of 2000 TSM104WAIPWR Tube of 25 TSM104WIN Tube of 75 TSM104WID Reel of 2500 TSM104WIDR Tube of 75 TSM104WIPW Reel of 2000 TSM104WIPWR PREVIEW TSM104WAI SM104AI PREVIEW TSM104WI SM104I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Absolute Maximum Ratings (1) over free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage 36 V VID Operational amplifier input differential voltage 36 V VI Operational amplifier input voltage range IKA Voltage reference cathode current –0.3 D package θJA Package thermal impedance (2) (3) Maximum junction temperature Tstg Storage temperature range (1) (2) (3) V mA 73 N package 67 PW package TJ 36 100 °C/W 108 –65 150 °C 150 °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Selecting the maximum of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions 2 MIN MAX VCC+ – VCC– Supply voltage 3 30 V IK Cathode current 1 100 mA TA Operating free-air temperature –40 105 °C Submit Documentation Feedback UNIT TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 Total Device Electrical Characteristics PARAMETER TEST CONDITIONS Total supply current, excluding cathode-current reference ICC VCC+ = 5 V, No load VCC+ = 30 V, No load TA MIN Full range TYP MAX 1.4 2.4 4 UNIT mA Operational Amplifier Electrical Characteristics VCC+ = 5 V, VCC– = GND, VO = 1.4 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TSM104W VIO TA MIN 25°C TYP MAX 1 5 Full range Input offset voltage 6 25°C TSM104WA 0.5 Full range αVIO Input offset voltage drift IIO Input offset current IIB Input bias current AVD Large-signal voltage gain VCC+ = 15 V, RL = 2 kΩ, VO = 1.4 V to 11.4 V kSVR Supply-voltage rejection ratio VCC+ = 5 V to 30 V mV 4 25°C 7 25°C 2 Full range µV/°C 30 50 25°C 30 Full range VCC+ = 30 V (1) 3 UNIT 150 200 25°C 50 Full range 25 100 25°C 65 25°C 0 VCC+ – 1.5 Full range 0 VCC+ – 2 25°C 70 Full range 60 20 Input common-mode voltage range CMRR Common-mode rejection ratio Isource Output source current VCC+ = 15 V, VO = 2 V, Vid = 1 V 25°C ISC Short circuit to GND VCC+ = 15 V 25°C Isink Output sink current VCC+ = 15 V, VO = 2 V, Vid = –1 V 25°C 10 20 25°C 27 28 Full range 27 dB 85 V dB 40 40 nA V/mV 100 VICR nA mA 60 mA mA VOH High-level output voltage VCC+ = 30 V, RL = 10 kΩ VOL Low-level output voltage RL = 10 kΩ SR Slew rate at unity gain VCC+ = 15 V, CL = 100 pF, RL = 2 kΩ, VI = 0.5 V to 3 V, unity gain 25°C 0.1 0.3 V/µs GBW Gain bandwidth product VCC+ = 30 V, VI = 10 mV, CL = 100 pF, RL = 2 kΩ, f = 100 kHz 25°C 0.5 0.9 MHz THD Total harmonic distortion VCC+ = 30 V, VO = 2 Vpp, CL = 100 pF, RL = 2 kΩ, f = 1 kHz, AV = 20 dB 25°C 0.01 % Vn Equivalent input noise voltage VCC = 30 V, RS = 100 Ω, f = 1 kHz 25°C 25 nV/√Hz Channel separation 1 kHz < f < 20 kHz 25°C 120 dB (1) 25°C 5 Full range V 20 20 mV The input common-mode voltage of either input should not be allowed to go below –0.3 V. The upper end of the common-mode voltage range is VCC+ – 1.5 V, but either input can go to VCC+ + 0.3 V without damage (absolute maximum ratings still must be observed). Submit Documentation Feedback 3 TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 Voltage Reference Electrical Characteristics PARAMETER TEST CONDITIONS TSM104W VREF IK = 10 mA Reference voltage TSM104WA IK = 10 mA MIN TYP MAX 2.5 2.525 25°C 2.475 Full range 2.45 25°C 2.49 Full range 2.48 2.55 2.5 ∆VREF VKA = VREF, IK = 10 mA DVREF DVKA Ratio of change in reference voltage to change in cathode voltage VKA = 3 V to 36 V, IK = 10 mA IREF Reference input current IK = 10 mA ∆IREF Reference input current deviation over temperature range Imin Minimum cathode current for regulation VKA = VREF 25°C IK,OFF Off-state cathode current 25°C 25°C 0.2 (1) Dynamic impedance (1) The dynamic impedance is defined as Full range 25°C 25°C ŤzkaŤ + ∆VKA ∆I K . Submit Documentation Feedback 30 –1.1 1.5 Full range Full range VKA = VREF, f < 1 kHz, ∆IK = 1 mA to 100 mA 7 –2 2.51 UNIT V 2.52 Reference input voltage deviation over temperature range |zka| 4 TA mV mV/V 2.5 3 µA 1.2 µA 0.5 1 mA 180 500 nA 0.5 Ω 0.8 TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 TYPICAL OPERATING CHARACTERISTICS TA = 25°C (unless otherwise noted) TOTAL HARMONIC DISTORTION (THD) vs FREQUENCY AMPLIFIER NOISE VOLTAGE vs FREQUENCY 250 Noise Voltage – nV/ÖHz 10 THD – % 1 0.1 0.01 0.001 10 200 150 100 50 0 100 1k Frequency – Hz 10k 100k 1 10 1k 100 10k 100k Frequency – Hz Figure 1. Figure 2. IK vs VREF VREF STABILITY vs CAPACITANCE 35 100 30 80 25 Current – mA IK – mA 60 40 20 15 10 20 5 0 0 1 -20 2.3 2.4 2.5 2.6 2.7 10 100 1000 10000 Capacitance – pF VREF – V Figure 3. Figure 4. Submit Documentation Feedback 5 TSM104W,, TSM104WA QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE www.ti.com SLOS478D – JULY 2005 – REVISED AUGUST 2006 TYPICAL OPERATING CHARACTERISTICS (continued) TA = 25°C (unless otherwise noted) VREF vs TEMPERATURE 2.515 IO = 100 mA 2.510 2.505 VREF – V 2.500 IO = 10 mA 2.495 2.490 IO = 1 mA 2.485 2.480 –40 –25 –10 5 20 35 50 65 80 Temperature – °C Figure 5. 6 Submit Documentation Feedback 95 110 125 PACKAGE OPTION ADDENDUM www.ti.com 5-Feb-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TSM104WAID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WAIPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM104WIPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 5-Feb-2007 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated