TI SN65LVEL11DR

SN65LVEL11
www.ti.com............................................................................................................................................................................................ SLLS927 – DECEMBER 2008
3.3 V ECL 1:2 Fanout Buffer
FEATURES
1
•
•
•
•
•
•
•
•
•
1:2 ECL Fanout Buffer
Operating Range
– PECL VCC = 3.0 V to 3.8 V With
VEE = 0 V
– NECL: VCC = 0 V with VEE = –3.0
to –3.8V
5 ps Skew Between Outputs
Support for Clock Frequencies > 2.0 GHz
265 ps Typical Propagation Delay
Deterministic Output Value for Open Input
Conditions or When Inputs = VEE
Built-in Temperature Compensation
Drop in Compatible to MC10LVEL11,
MC100LVEL11
Built-In Input Pull Down Resistors
DESCRIPTION
The SN65LVEL11 is a fully differential 1:2 ECL fanout
buffer. The device includes circuitry to maintain a
known logic level when inputs are in open condition.
The SN65LVEL11 is functionally equivalent to
SN65EL11 with improved performance. The
SN65LVEL11 is housed in an industry standard
SOIC-8 package and is also available in the
TSSOP-8 package option.
PINOUT ASSIGNMENT
Q0 1
8
VCC
Q0 2
7
D
Q1 3
6
D
Q1 4
5
VEE
APPLICATIONS
•
•
Data and Clock Transmission Over Backplane
Signaling Level Conversion
Table 1. Pin Description
PIN
FUNCTION
D, D
PECL/ECL data inputs
Q0, Q0, Q1, Q1
PECL/ECL outputs
VCC
Positive supply
VEE
Negative supply
ORDERING INFORMATION (1)
(1)
PART NUMBER
PART MARKING
PACKAGE
LEAD FINISH
SN65LVEL11D
SN65LVEL11DGK
SN65LVEL11
SOIC
NiPdAu
SN65LVEL11
SOIC-TSSOP
NiPdAu
Leaded device options not initially available. Contact TI sales representative for further details.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated
SN65LVEL11
SLLS927 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
CONDITION
VALUE
UNIT
Absolute PECL mode supply voltage, VCC
VEE = 0 V
6
V
Absolute NECL mode power supply, VEE
VCC = 0 V
–6
V
PECL mode input voltage
VEE = 0 V; VI ≤ VCC
6
V
NECL mode input voltage
VCC = 0 V; VI ≥ VEE
–6
V
Continuous
50
Surge
100
Output current
mA
Operating temperature range
–40 to 85
°C
Storage temperature range
–65 to 150
°C
(1)
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
POWER DISSIPATION RATINGS
PACKAGE
CIRCUIT BOARD
MODEL
POWER RATING
TA < 25°C
(mW)
THERMAL RESISTANCE,
JUNCTION TO AMBIENT
NO AIRFLOW
DERATING FACTOR
TA > 25°C
(mW/°C)
POWER RATING
TA = 85°C
(mW)
SOIC
SOIC-TSSOP
Low-K
719
139
7
288
High-K
840
119
8
336
Low-K
469
213
5
188
High-K
527
189
5
211
THERMAL CHARACTERISTICS
PARAMETER
θJB
Junction-to Board Thermal Resistance
θJC
Junction-to Case Thermal Resistance
PACKAGE
VALUE
UNIT
°C/W
SOIC
79
SOIC-TSSOP
120
SOIC
98
SOIC-TSSOP
74
°C/W
KEY ATTRIBUTES
CHARACTERISTICS
Internal input pull down resistor
VALUE
75 kΩ
Moisture sensitivity level
Level 1
Flammability rating (Oxygen Index: 28 to 34)
UL 94 V-0 at 0.125 in
ESD-HBM
4 kV
ESD-machine model
200 V
ESD-charge device model
2 kV
Meets or exceeds JEDEC Spec EIA/JESD78 latchup test
2
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65LVEL11
SN65LVEL11
www.ti.com............................................................................................................................................................................................ SLLS927 – DECEMBER 2008
LVPECL DC CHARACTERISTICS (1) (VCC = 3.3 V, VEE = 0.0 V (2)
–40°C
CHARACTERISTICS
ICC
Power Supply Current
VOH
Output HIGH Voltage
MIN
TYP
25°C
MAX
20
(3)
(3)
MIN
TYP
85°C
MAX
MIN
TYP MAX
21
UNIT
25
20
25
25
mA
2215
2420
2215 2286
2420
2215
2420
mV
VOL
Output LOW Voltage
1470
1680
1470 1584
1680
1470
1680
mV
VIH
Input High Voltage (Single-Ended)
2135
2420
2135
2420
2135
2420
mV
VIL
Input LOW Voltage (Single-Ended)
1490
1825
1490
1825
1490
1825
mV
VIHCMR
Input HIGH voltage common mode range
(Differential) (4)
IIH
Input HIGH Current
IIL
Input LOW current
(1)
(2)
(3)
(4)
V
Vpp < 500 mV
1.2
3.1
1.1
3.1
1.1
3.1
Vpp > 500 mV
1.4
3.1
1.3
3.1
1.3
3.1
150
150
150
D
0.5
0.5
0.5
D
–600
–600
–600
µA
µA
Device will meet the specifications after thermal balance has been established when mounted in a socket or printed circuit board with
maintained transverse airflow greater than 500 lfpm. Electrical parameters are assured only over the declared operating temperature
range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied
individually under normal operating conditions and not valid simultaneously.
Input and output parameters vary 1:1 with VCC. VEE can vary ±0.3 V
Outputs are terminated through a 50 Ω resistor to VCC – 2.0 V.
VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between VPP min and 1 V.
LVPNECL DC CHARACTERISTICS (1) (VEE = –3.3 V; VCC = 0.0 V;)
–40°C
CHARACTERISTICS
IEE
Power supply current
VOH
Output HIGH voltage
VOL
MIN TYP
25°C
MAX
MIN
TYP
MIN
TYP
UNIT
20
25
25
mA
–1085
–1013
–880
–1085
–880
mV
Output LOW voltage (3)
–1830
–1620
–1830
–1722
–1620
–1830
–1620
mV
VIH
Input high voltage (Single-Ended)
–1165
–880
–1165
–880
–1165
–880
mV
VIL
Input LOW voltage (Single-Ended)
–1810
–1475
–1810
–1475
–1810
–1475
mV
VIHCMR
Input HIGH voltage common mode range
(Differential) (4)
Input HIGH current
IIL
Input LOW current
(1)
(2)
(3)
(4)
21
MAX
–880
(3)
25
85°C
MAX
–1085
IIH
20
(2)
V
Vpp < 500 mV
–2.1
–0.2
–2.2
–0.2
–2.2
–0.2
Vpp > 500 mV
–1.9
–0.2
–2.0
–0.2
–2.0
–0.2
150
150
150
D
0.5
0.5
0.5
D
–600
–600
–600
µA
µA
Device will meet the specifications after thermal balance has been established when mounted in a socket or printed circuit board with
maintained transverse airflow greater than 500 lfpm. Electrical parameters are assured only over the declared operating temperature
range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied
individually under normal operating conditions and not valid simultaneously.
Input and output parameters vary 1:1 with VCC. VEE can vary ±0.3 V.
Outputs are terminated through a 50 Ω resistor to VCC – 2.0 V.
VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between VPP min and 1 V.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65LVEL11
3
SN65LVEL11
SLLS927 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
AC CHARACTERISTICS
(1)
(VCC = 3.3 V; VEE = 0.0 V or VCC = 0.0 V; VEE = –3.3 V) (2)
–40°C
CHARACTERISTIC
MIN
fMAX
Max switching frequency (3) See Figure 6
tPLH/tPHL
Propagation delay to output
Within device skew
tSKEW
25°C
TYP MAX
MIN
TYP
2.9
235
(4)
Device to device skew (5)
85°C
MAX
MIN
350
235
2.7
350
TYP
MAX
2.4
235
UNIT
GHz
350
ps
10
18
10
18
10
18
ps
10
25
10
25
10
25
ps
5
15
5
15
5
15
ps
Duty cycle skew (6)
tJITTER
Random clock jitter (RMS)
VPP
Input swing (7)
200
1000
200
1000
200
1000
mV
tr/tf
Output rise/fall times Q (20%–80%)
150
300
150
300
150
300
ps
(1)
(2)
(3)
(4)
(5)
(6)
(7)
0.2
0.2
0.2
ps
Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board
with maintained transverse airflow greater than 500 lfpm. Electrical parameters are assured only over the declared operating
temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are
applied individually under normal operating conditions and not valid simultaneously.
VEE can vary ±0.3 V
Maximum switching frequency measured at output amplitude of 300 mVpp.
Within-device skew is defined as identical transitions on similar paths through a device.
Device-Device Skew is defined as identical transitions at identical Vcc levels.
Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device.
VPP(min) is the minimum input swing for which AC parameters are assured.
Typical Termination for Output Driver
ZO = 50 W
P
P
Driver
Receiver
N
N
ZO = 50 W
50 W
50 W
VTT
VTT = VCC - 2 V
Figure 1. Termination for Output Driver
D
D
Q
Q
tPHL
tPLH
Figure 2. Propagation Delay
4
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65LVEL11
SN65LVEL11
www.ti.com............................................................................................................................................................................................ SLLS927 – DECEMBER 2008
D
VPP(min)
VPP(max)
D
Figure 3. Input Voltage Swing
80%
20%
tf
tr
Figure 4. Output Rise and Fall Times
D
D
Q0
Q0
tPHL0
tPLH0
Q1
Q1
tPHL1
tPLH1
Device Skew =
Higher [(tPLH1 - tPLH0), (tPHL1 - tPHL0)]
Figure 5. Device Skew
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65LVEL11
5
SN65LVEL11
SLLS927 – DECEMBER 2008............................................................................................................................................................................................ www.ti.com
1000
VCC = 3.3 V,
VEE = 0 V
900
Output Amplitude - mV
800
700
600
TA = -40°C
500
400
TA = 25°C
300
200
TA = 85°C
100
0
0
500 1000 1500 2000 2500 3000 3500 4000 4500
f - Frequency - MHz
Figure 6. Output Amplitude vs Frequency
6
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): SN65LVEL11
PACKAGE OPTION ADDENDUM
www.ti.com
19-Jan-2009
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN65LVEL11D
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65LVEL11DGK
ACTIVE
MSOP
DGK
8
80
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65LVEL11DGKR
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN65LVEL11DR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN65LVEL11DGKR
MSOP
DGK
8
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
SN65LVEL11DR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN65LVEL11DGKR
MSOP
DGK
8
2500
346.0
346.0
29.0
SN65LVEL11DR
SOIC
D
8
2500
346.0
346.0
29.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DLP® Products
www.dlp.com
Communications and
Telecom
www.ti.com/communications
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
www.ti.com/clocks
Consumer Electronics
www.ti.com/consumer-apps
Interface
interface.ti.com
Energy
www.ti.com/energy
Logic
logic.ti.com
Industrial
www.ti.com/industrial
Power Mgmt
power.ti.com
Medical
www.ti.com/medical
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
www.ti.com/video
Wireless
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated