HITACHI HD74LV1G08A

HD74LV1G08A
2–input AND Gate
ADE-205-319D (Z)
5th. Edition
April 2001
Description
The HD74LV1G08A has two–input AND gate in a 5 pin package. Low voltage and high speed operation
is suitable for the battery powered products (e.g., notebook computers), and the low power consumption
extends the battery life.
Features
• The basic gate function is lined up as hitachi uni logic series.
• Supplied on emboss taping for high speed automatic mounting.
• Electrical characteristics equivalent to the HD74LV08A
Supply voltage range : 1.65 to 5.5 V
Operating temperature range : –40 to +85°C
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
• All the logical input has hysteresis voltage for the slow transition.
HD74LV1G08A
Outline and Article Indication
• HD74LV1G08A
Index band
Marking
L
2
= Control code
(
or blank)
CMPAK–5
• HD74LV1G08A
Marking
L
VSON–5
2
2
= Control code
HD74LV1G08A
Function Table
Inputs
Output Y
A
B
L
L
L
H
L
L
L
H
L
H
H
H
H : High level
L : Low level
Pin Arrangement
IN B
1
IN A
2
GND
3
5
VCC
4
OUT Y
(Top view)
3
HD74LV1G08A
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range
*1
Output voltage range
*1, 2
Symbol
Ratings
Unit
VCC
–0.5 to 7.0
V
VI
–0.5 to 7.0
V
VO
–0.5 to VCC + 0.5
V
–0.5 to 7.0
Test Conditions
Output : H or L
VCC : OFF
Input clamp current
I IK
–20
mA
VI < 0
Output clamp current
I OK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±25
mA
VO = 0 to VCC
Continuous current through
VCC or GND
I CC or IGND
±50
mA
Maximum power dissipation
at Ta = 25°C (in still air) *3
PT
200
mW
Storage temperature
Tstg
–65 to 150
°C
Notes:
4
The absolute maximum ratings are values which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
HD74LV1G08A
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.65
5.5
V
Input voltage range
VI
0
5.5
V
Output voltage range
VO
0
VCC
V
Output current
I OL
—
1
mA
—
2
VCC = 2.3 to 2.7 V
—
6
VCC = 3.0 to 3.6 V
—
12
VCC = 4.5 to 5.5 V
—
–1
VCC = 1.65 to 1.95 V
—
–2
VCC = 2.3 to 2.7 V
—
–6
VCC = 3.0 to 3.6 V
—
–12
VCC = 4.5 to 5.5 V
0
300
0
200
VCC = 2.3 to 2.7 V
0
100
VCC = 3.0 to 3.6 V
0
20
VCC = 4.5 to 5.5 V
–40
85
I OH
Input transition rise or fall rate ∆t / ∆v
Operating free-air temperature Ta
ns / V
Conditions
VCC = 1.65 to 1.95 V
VCC = 1.65 to 1.95 V
°C
Note: Unused or floating inputs must be held high or low.
5
HD74LV1G08A
Electrical Characteristic
• Ta = –40 to 85°C
Item
Symbol VCC (V) *
Input voltage
VIH
VIL
Hysteresis voltage VH
Output voltage
VOH
VOL
Min
Typ
1.65 to 1.95 VCC×0.75 —
Max
Unit
—
V
Test condition
2.3 to 2.7
VCC×0.7
—
—
3.0 to 3.6
VCC×0.7
—
—
4.5 to 5.5
VCC×0.7
—
—
1.65 to 1.95 —
—
VCC×0.25
2.3 to 2.7
—
—
VCC×0.3
3.0 to 3.6
—
—
VCC×0.3
4.5 to 5.5
—
—
VCC×0.3
1.8
—
0.25
—
2.5
—
0.30
—
3.3
—
0.35
—
5.0
—
0.45
—
Min to Max
VCC–0.1
—
—
1.65
1.4
—
—
I OH = –1 mA
2.3
2.0
—
—
I OH = –2 mA
3.0
2.48
—
—
I OH = –6 mA
4.5
3.8
—
—
I OH = –12 mA
Min to Max
—
—
0.1
I OL = 50 µA
1.65
—
—
0.3
I OL = 1 mA
2.3
—
—
0.4
I OL = 2 mA
3.0
—
—
0.44
I OL = 6 mA
4.5
—
—
0.55
I OL = 12 mA
V
VT+ – VT–
V
I OH = –50 µA
Input current
I IN
0 to 5.5
—
—
±1
µA
VIN = 5.5 V or GND
Quiescent
supply current
I CC
5.5
—
—
10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
I OFF
0
—
—
5
µA
VIN or VO = 0 to 5.5 V
3.3
—
2.5
—
pF
VIN = VCC or GND
Input capacitance CIN
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
6
HD74LV1G08A
Switching Characteristics
• VCC = 1.8 ± 0.15 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
t PLH
—
12.8
22.7
1.0
25.0
delay time
t PHL
—
19.4
32.8
1.0
38.5
Unit Test
ns
FROM
TO
Conditions (Input)
(Output)
CL = 15 pF
A or B
Y
FROM
TO
CL = 50 pF
• VCC = 2.5 ± 0.2 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
t PLH
—
7.9
13.8
1.0
16.0
delay time
t PHL
—
10.5
17.3
1.0
20.0
Unit Test
ns
Conditions (Input)
(Output)
CL = 15 pF
A or B
Y
FROM
TO
CL = 50 pF
• VCC = 3.3 ± 0.3 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
t PLH
—
5.6
8.8
1.0
10.5
delay time
t PHL
—
7.5
12.3
1.0
14.0
Unit Test
ns
Conditions (Input)
(Output)
CL = 15 pF
A or B
Y
FROM
TO
CL = 50 pF
• VCC = 5.0 ± 0.5 V
Item
Symbol
Ta = 25°C
Ta = –40 to 85°C
Min
Typ
Max
Min
Max
Propagation
t PLH
—
4.1
5.9
1.0
7.0
delay time
t PHL
—
5.5
7.9
1.0
9.0
Unit Test
ns
Conditions (Input)
(Output)
CL = 15 pF
Y
A or B
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
CPD
VCC (V)
Ta = 25°C
Min
Typ
Max
3.3
—
8.0
—
5.0
—
10.0
—
Unit
Test Conditions
pF
f = 10 MHz
7
HD74LV1G08A
Test Circuit
VCC
Output
Input
Pulse
generator
50 Ω
CL
Note: CL includes probe and jig capacitance.
• Waveforms
tr
tf
90%
Input
VCC
90%
50%
50%
10%
10%
GND
VOH
Output
50%
t PLH
50%
t PHL
VOL
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
2. The output are measured one at a time with one transition per measurement.
8
HD74LV1G08A
Package Dimensions
As of January, 2001
(0.65)
+ 0.1
0.15– 0.05
1.25 ± 0.1
(0.65)
0 – 0.1
(0.2)
2.0 ± 0.2
0.9 ± 0.1
(0.425)
5 – 0.2 ± 0.05
2.1 ± 0.3
1.3 ± 0.2
(0.425)
Unit: mm
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
CMPAK-5
—
Conforms
0.006 g
As of January, 2001
Unit: mm
0.12 ± 0.05
1.60 ± 0.05
0.50
1.20 ± 0.05
0.50
5 — 0.2 ± 0.05
0.55 ± 0.05
1.6 ± 0.05
Hitachi Code
JEDEC
EIAJ
Mass (reference value)
TNP-5D



9
HD74LV1G08A
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica
Europe
Asia
Japan
:
:
:
:
http://semiconductor.hitachi.com/
http://www.hitachi-eu.com/hel/ecg
http://sicapac.hitachi-asia.com
http://www.hitachi.co.jp/Sicd/indx.htm
For further information write to:
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585200
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straße 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00,
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road,
Hung-Kuo Building,
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower,
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon,
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://semiconductor.hitachi.com.hk
Copyright © Hitachi, Ltd., 2001. All rights reserved. Printed in Japan.
Colophon 3.0
10