TECHNICAL DATA IN74LS04 Hex Inverters This device contains six independent inverts. It performs the Boolean function Y=A. ORDERING INFORMATION IN74LS04N Plastic IN74LS04D SOIC TA = -0° to 70° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs Output A Y H L L H PIN 14 =VCC PIN 7 = GND 1 IN74LS04 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC Supply Voltage 7.0 V VIN Input Voltage 7.0 V VOUT Output Voltage 7.0 V Tstg Storage Temperature Range -65 to +150 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 4.75 5.25 V VCC Supply Voltage IOH High Level Output Current -400 V IOL Low Level Output Current 8.0 V TA Ambient Temperature Range +70 °C 0 DC ELECTRICAL CHARACTERISTICS over full operating conditions Guaranteed Limit Symbol Parameter Test Conditions VIH High Level Input Voltage VIL Low Level Input Voltage VIK Input Clamp Voltage VCC = min, II = -18 mA VOH High Level Output Current VCC = min, VIL =max Min Max 2 Unit V 0.8 V -1.5 V 2.7 V IOH = max VOL Low Level Output Voltage VCC = min, VIH =min, 0.5 V IOL = 8 mA II Input Current at maximum input voltage VCC = max, VI = -7V 0.1 mA IIH High Level Input Current VCC = max, VIN = 2.7 V 20 µA IIL Low Level Input Current VCC = max, VIN = 0.4 V -0.4 mA IOS Short-circuit output current VCC = max (Note) -100 mA ICC Supply Current VCC = max Total with outputs high 2.4 mA Total with outputs low 6.6 -20 Note: Not more than one output should be shorted at a time, and duration should not exceed one second. 2 IN74LS04 AC ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, CL = 15 pF, TA=25 °C, RL = 2 kΩ, tr =15 ns, tf = 6.0 ns) Symbol Parameter Min Max Unit tPLH Propagation Delay Time 15 ns tPHL Propagation Delay Time 15 ns Figure 1. Switching Waveforms NOTE A. CL includes probe and jig capacitance. Figure 2. Test Circuit 3 IN74LS04 N SUFFIX PLASTIC DIP (MS - 001AA) A Dimension, mm 8 14 B 7 1 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G M K J H D 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AB) Dimension, mm A 14 8 H B 1 G P 7 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M NOTES: 1. Dimensions A and B do not include mold flash or protrusion. 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. F M Symbol MIN MAX A 8.55 8.75 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.27 J 0° 8° K 0.1 0.25 M 0.19 0.25 P 5.8 6.2 R 0.25 0.5 4