MKT 1817 Vishay Roederstein Metallized Polyester Film Capacitors Related Document: IEC 60384-2 MAIN APPLICATIONS: Dimensions in millimeters Blocking, bypassing, filtering and timing, high frequency coupling and decoupling for fast digital and analog ICs, interference suppression in low voltage applications. W Max. L Max. Marking MARKING: H Max. 0.6 Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture DIELECTRIC: ± 0.4 6.0-1 Polyester film ELECTRODES: Vacuum deposited aluminum Ø 0.5 COATING: 5.0 ± 0.4 Flame retardant plastic case (UL-class 94 V-0), green, epoxy resin sealed TIME CONSTANT: CONSTRUCTION: Measured with 50 VDC after one minute Extended metallized film (refer to general information) For C > 0.33µF: LEADS: Tinned wire 1250 s minimum value (10,000 s typical value) IEC TEST CLASSIFICATION: CAPACITANCE DRIFT: 55/100/56, according to IEC 60068 Up to + 40°C, ± 1.5% for a period of two years OPERATING TEMPERATURE RANGE: DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: - 55°C to + 100°C CAPACITANCE RANGE: At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR 1000pF to 1.0µF CAPACITANCE TOLERANCES: SELF INDUCTANCE: ± 20% (M), ± 10% (K), ± 5% (J) ~ 6nH measured with 2mm long leads RATED VOLTAGES (UR): 63 VDC, 100 VDC, 250 VDC, 400 VDC PULL TEST ON LEADS: PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: ≥ 30 N in direction of leads according to IEC 60068-2-21 40 VAC, 63 VAC, 160 VAC, 200 VAC RELIABILITY: TEST VOLTAGE (ELECTRODE/ELECTRODE): Operational life > 300,000h Failure rate < 2 FIT (40°C and 0.5 x UR) 1.6 x UR for 2 s INSULATION RESISTANCE: Measured with 100 VDC (63 VDC series measured at 50 VDC) after one minute For further details, please refer to the general information provided in this catalog. For C ≤ 0.33µF and UR > 100 VDC: 7500 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: 3750 MΩ minimum value (50,000 MΩ typical value) MAXIMUM PULSE RISE TIME Maximum pulse rise time dv/dt [V/µs] PCM (mm) 5 63 VDC 100 VDC 250 VDC 400 VDC 15 24 44 100 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. DISSIPATION FACTOR TAN δ MEASURED AT 1kHz 10kHz 100kHz C ≤ 0.1µF 0.1µF < C ≤ 1.0µF -3 8 x 10-3 15 x 10-3 — 8 x 10 15 x 10-3 25 x 10-3 Maximum values Document Number 26032 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 37 MKT 1817 Vishay Roederstein Metallized Polyester, Related Document: IEC 60384-2 CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC W H L W H L W H L W H L 1000 pF - 210 — — — — — — — — — 2.5 6.0 7.5 1500 pF - 215 — — — — — — — — — 2.5 6.0 7.5 2200 pF - 222 — — — — — — — — — 2.5 6.0 7.5 3300 pF - 233 — — — — — — 2.5 6.0 7.5 3.0 6.5 7.5 4700 pF - 247 — — — — — — 2.5 6.0 7.5 3.5 8.5 7.5 6800 pF - 268 — — — — — — 2.5 6.0 7.5 3.5 8.5 7.5 0.01 µF - 310 — — — — — — 2.5 6.0 7.5 4.5 9.5 7.5 0.015 µF - 315 — — — — — — 2.5 6.0 7.5 5.0 10.0 7.5 0.022 µF - 322 — — — 2.5 6.0 7.5 3.0 6.5 7.5 5.5 11.5 7.5 0.033 µF - 333 — — — 2.5 6.0 7.5 3.5 8.5 7.5 — — — 0.047 µF - 347 — — — 2.5 6.0 7.5 4.5 9.5 7.5 — — — 0.068 µF - 368 — — — 2.5 6.0 7.5 4.5 9.5 7.5 — — — 0.1 µF - 410 2.5 6.0 7.5 3.5 8.5 7.5 5.5 11.5 7.5 — — — 0.15 µF - 415 3.5 8.5 7.5 4.5 9.5 7.5 — — — — — — 0.22 µF - 422 3.5 8.5 7.5 5.0 10.0 7.5 — — — — — — 0.33 µF - 433 4.5 9.5 7.5 5.5 11.5 7.5 — — — — — — 0.47 µF - 447 5.0 10.0 7.5 — — — — — — — — — 0.68 µF -468 5.0 10.5 7.5 — — — — — — — — — 1.0 µF - 510 5.5 11.5 7.5 — — — — — — — — — Further values upon request. For C-values > 1.0µF please refer to type MKT 1826. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLE PCM 5 D AMMO 16.5 S* MKT 1817-233-255-D X G AMMO 18.5 S* MKT 1817-233-255-G X F REEL 16.5 350 MKT 1817-233-255-F X W REEL 18.5 350 MKT 1817-233-255-W X — BULK — — MKT 1817-233-255 X *S = box size 55 x 210 x 340mm (W x H x L) www.vishay.com 38 For technical questions, contact [email protected] Document Number 26032 Revision 01-Dec-03 MKT 1817 Vishay Roederstein 102 7 5 V RMS Capacitance in µF 0.1 3 0.4 7 1.0 0.1 5 0.3 3 100 VDC 63 VDC 2 3 100 5 7 103 2 3 5 7 104 102 5 7 105 f [Hz] 2 3 V RMS 103 7 5 2 5 7 103 3 2 3 5 7 104 5 7 105 f [Hz] 2 3 Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency Capacitance in pF and µF 103 7 5 Capacitance in pF and µF 3 3 2 2 33 00 2 10 7 5 102 7 5 0.0 0.1 3 2 1 0.0 47 0.0 22 5 7 103 2 3 5 7 104 00 0.0 2 3 1 0.0 2 400 VDC 2 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency Z (Ω) 00 47 102 5 7 105 f [Hz] 2 3 10 7 5 3 2 0.1µF 0.047µF 1 7 5 3 2 0.1 7 5 5 7 10 1 2 0.22µF 1µF 0.01 0.47µF 3 2 0.01µF 3 22 101 0.022µF 2 00 3 2 250 VDC 102 10 2 1000pF V RMS 47 3 2 102 101 0.0 101 7 5 3 2 100 22 2 2 101 7 5 Capacitance in µF 0.0 3 0.2 2 102 7 5 3300pF V RMS Metallized Polyester, Related Document: IEC 60384-2 3 5 7 100 2 3 f [MHz] Impedance versus Frequency Z = f (f) (Lead Length 2.0mm) Document Number 26032 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 39