M Series 50 Watt AC-DC Converters Input voltage range 85...264 V AC 1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage LGA • Rugged electrical and mechanical design • Outputs individually controlled with excellent dynamic properties • Operating ambient temperature range –40...71°C with convection cooling Selection chart Output 1 Output 2 Output 3 Uo nom Io nom Uo nom Io nom Uo nom Io nom [V DC] 5.1 5.1 12 12 15 15 24 24 48 48 12 12 15 15 5.1 5.1 5.1 5.1 [V DC] 12 12 15 15 12 12 15 15 [V DC] 12 12 15 15 [A] 8 8 4 4 3.4 3.4 2 2 1 1 2 2 1.7 1.7 5 5 5 5 www.power-one.com Edition 4/04.2001 [A] 2 2 1.7 1.7 0.7 0.7 0.6 0.6 [A] 0.7 0.7 0.6 0.6 Input voltage Ui [V AC] 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 85...264 Type LM 1001-7R LMZ 1001-7R LM 1301-7R LMZ 1301-7R LM 1501-7R LMZ 1501-7R LM 1601-7R LMZ 1601-7R LM 1901-7R LMZ 1901-7R LM 2320-7 LMZ 2320-7 LM 2540-7 LMZ 2540-7 LM 3020-7 LMZ 3020-7 LM 3040-7 LMZ 3040-7 Options -9, E, P, D, V, A, H, F -9, E, P, D, V, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, A, H, F -9, E, P, D, V, A, H, F -9, E, P, D, V, A, H, F -9, E, P, D, V, A, H, F -9, E, P, D, V, A, H, F 1 Cassette Style M Series Input Input voltage Input frequency Inrush current limitation continuous range 85...264 V AC 47...65(440) Hz by thermistor Output Efficiency Output voltage setting accuracy Output voltage switching noise Line regulation Load regulation Minimum load Current limitation main output Current limitation aux. output(s) Operation in parallel Hold-up time Ui nom, Io nom Ui nom, Io nom IEC/EN 61204, total Ui min...Ui max, Io nom, each output regulated Ui nom, 0...Io nom, each output regulated not required rectangular U/I characteristic rectangular U/I characteristic by current limitation, only main outputs Ui = 230 V AC, Io nom up to 81% ±0.6% Uo nom typ. 50 mVpp typ. ±0.2% Uo nom typ. 0.15% Uo nom 0A typ. 110% Io nom typ. 120% Io nom typ. 90 ms Protection Input fuse Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature built-in varistor or suppressor diode no-load, overload and short circuit proof suppressor diode in each output switch-off with auto restart T 2.5 A, 250 V AC typ. 80% Ui min typ. 110% Ui max typ. 150% Uo nom TC typ. 100°C Control Output voltage adjustment Inhibit Status indication single output types TTL input, output(s) disabled if open circuit LEDs: OK, inhibit, overload 0...110% Uo1 nom Safety Approvals Class of equipment Protection degree Electric strength test voltage www.power-one.com Edition 4/04.2001 EN 60950, UL 1950, CSA C22.2 No. 950 LM LMZ units without options class I, I/case class I, I/O class II (LMZ), I/O and I/case O/case O/O class I class II IP 40 2 kV AC 4 kV AC 4 kV AC 1 kV AC 0.2 kV AC 2 M Series 50 Watt AC-DC Converters EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level x (20 V/m) IEC/EN 61000-4-4, input, level 3/4 (2/4 kV) IEC/EN 61000-4-5, input, level 3/4 (2/4 kV) IEC/EN 61000-4-6, level 3 (10 V) CISPR 22/EN 55022, class I, conducted criterion A criterion A/B criterion A/B criterion A criterion B class B Environmental Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration MTBF Ui nom, Io nom, convection cooled Ui nom, Io nom –25...71°C –25...95°C –40...100°C 56 days 0.35 mm/5 gn 100 gn 40 gn 4.9 gn rms 320'000 h non operational IEC/EN 60068-2-3, 93%, 40°C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 6 ms IEC/EN 60068-2-29, 6 ms IEC/EN 60068-2-64, 20…500 Hz MIL-HDBK-217E, GB, 40°C, single output types Options Extended temperature range –40...71°C, ambient, operating Electronic inrush current limitation Output voltage adjustment 95...105% Uo nom, excludes feature R and vice versa Input and/or output undervoltage monitoring, excludes option V Input and/or output undervoltage monitoring (VME), excludes option D Test sockets for check of output voltage Enhanced electric strength test 2 kV AC Fuse not user accessible -9 E P D0...D9 V1...V3 A H F Pin allocation Pin 2 5 8 11 14 17 14 17 20 23 26 29 32 Electrical determination Inhibit control input Data safe or ACFAIL Output voltage (positive) Output voltage (negative) Control input + Control input – Output voltage (positive) Output voltage (negative) Output voltage (positive) Output voltage (negative) Protective earth AC input voltage AC input voltage www.power-one.com Edition 4/04.2001 LM 1000 i D or V Vo1+ Vo1– R G Vo1+ Vo1– N P LMZ 1000 i D or V Vo1+ Vo1– R G Vo1+ Vo1– N P LM 2000 i D or V LMZ 2000 i D or V LM 3000 i D or V Vo3+ Vo3– LMZ 3000 i D or V Vo3+ Vo3– Vo2+ Vo2– Vo1+ Vo1– Vo2+ Vo2– Vo1+ Vo1– Vo2+ Vo2– Vo1+ Vo1– Vo2+ Vo2– Vo1+ Vo1– N P N P N P N P 3 Cassette Style M Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 8 11 14 17 20 23 26 29 32 S09012 5 103 22 (0.87") 173.7 (6.84") M 3; depth = 4 mm (chassis mount) Measuring point for case temperature TC 68 127 (5") 168.5 (6.63") 20 (0.79") 2TE 6TE 2 European Projection 111.2 (3U) (4.38") OK Inhibit i Potentiometer (option D) or potentiometer (option V) 38.7 (1.52") IoL Test sockets (option A) Potentiometer(s) (option P) Accessories Front panels 19” (Schroff/Intermas) Mating H11 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Flexible PCB for connecting the converter via an H11 connector, if mounted on a PCB Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting www.power-one.com Edition 4/04.2001 4